Download or read book Subsea Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2005-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world's seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.
Download or read book Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2001-02-07 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipelines and Risers
Download or read book Subsea Pipeline Design Analysis and Installation written by Qiang Bai and published by Gulf Professional Publishing. This book was released on 2014-02-18 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: As deepwater wells are drilled to greater depths, pipeline engineers and designers are confronted with new problems such as water depth, weather conditions, ocean currents, equipment reliability, and well accessibility. Subsea Pipeline Design, Analysis and Installation is based on the authors' 30 years of experience in offshore. The authors provide rigorous coverage of the entire spectrum of subjects in the discipline, from pipe installation and routing selection and planning to design, construction, and installation of pipelines in some of the harshest underwater environments around the world. All-inclusive, this must-have handbook covers the latest breakthroughs in subjects such as corrosion prevention, pipeline inspection, and welding, while offering an easy-to-understand guide to new design codes currently followed in the United States, United Kingdom, Norway, and other countries. - Gain expert coverage of international design codes - Understand how to design pipelines and risers for today's deepwater oil and gas - Master critical equipment such as subsea control systems and pressure piping
Download or read book Offshore Pipelines written by Boyun Guo and published by Elsevier. This book was released on 2005-04-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.
Download or read book Subsea Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2005-12-05 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine pipelines for the transportation of oil and gas have become a safe and reliable part of the expanding infrastructure put in place for the development of the valuable resources below the worlds seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve as the design of more cost effective pipelines becomes a priority and applications move into deeper waters and more hostile environments. This updated edition of a best selling title provides the reader with a scope and depth of detail related to the design of offshore pipelines and risers not seen before in a textbook format. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-13 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.
Download or read book Corrosion Protection for the Oil and Gas Industry written by Mavis Sika Okyere and published by CRC Press. This book was released on 2019-02-14 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Protection for the Oil and Gas Industry: Pipelines, Subsea Equipment, and Structures summarizes the main causes of corrosion and requirements for materials protection, selection of corrosion-resistant materials and coating materials commonly used for corrosion protection, and the limitations to their use, application, and repair. This book focuses on the protection of steels against corrosion in an aqueous environment, either immersed in seawater or buried. It also includes guidelines for the design of cathodic protection systems and reviews of cathodic protection methods, materials, installation, and monitoring. It is concerned primarily with the external and internal corrosion protection of onshore pipelines and subsea pipelines, but reference is also made to the protection of other equipment, subsea structures, risers, and shore approaches. Two case studies, design examples, and the author’s own experiences as a pipeline integrity engineer are featured in this book. Readers will develop a high quality and in-depth understanding of the corrosion protection methods available and apply them to solve corrosion engineering problems. This book is aimed at students, practicing engineers, and scientists as an introduction to corrosion protection for the oil and gas industry, as well as to overcoming corrosion issues.
Download or read book Subsea Pipeline Integrity and Risk Management written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2014-02-21 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea repairs and inspection are costly for petroleum and pipeline engineers and proper training is needed to focus on ensuring system strength and integrity. Subsea Pipeline Integrity and Risk Management is the perfect companion for new engineers who need to be aware of the state-of-the-art techniques. This handbook offers a "hands-on" problem-solving approach to integrity management, leak detection, and reliability applications such as risk analysis. Wide-ranging and easy-to-use, the book is packed with data tables, illustrations, and calculations, with a focus on pipeline corrosion, flexible pipes, and subsea repair. Reliability-based models also provide a decision making tool for day-to-day use. Subsea Pipeline Integrity and Risk Management gives the engineer the power and knowledge to protect offshore pipeline investments safely and effectively. - Includes material selection for linepipe, especially selection of standard carbon steel linepipe - Covers assessment of various types of corrosion processes and definition of anti-corrosion design against internal as well as external corrosion - Gives process and flow assurance for pipeline systems including pipeline integrity management
Download or read book Design and Installation of Marine Pipelines written by Mikael Braestrup and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook on submarine pipeline systems covers a broad spectrum of topics from planning and site investigations, procurement and design, to installation and commissioning. It considers guidelines for the choice of design parameters, calculation methods and construction procedures. It is based on limit state design with partial safety coefficients.
Download or read book Offshore Pipeline Design Analysis and Methods written by A. H. Mousselli and published by . This book was released on 1981 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Piping and Pipeline Calculations Manual written by Philip Ellenberger and published by Elsevier. This book was released on 2014-01-22 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flexible Pipes written by Qiang Bai and published by John Wiley & Sons. This book was released on 2017-03-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the most well-respected teams of scientists in the area of pipelines, this revolutionary approach offers the engineer working in the energy industry the theory, analysis, and practical applications for applying new materials and modeling to the design and effective use of flexible pipes. Recent changes in the codes for building pipelines has led to a boom in the production of new materials that can be used in flexible pipes. With the use of polymers, steel, and other new materials and variations on existing materials, the construction and, therefore, the installation and operation of flexible pipes is changing and being improved upon all over the world. The authors of this work have written numerous books and papers on these subjects and are some of the most influential authors on flexible pipes in the world, contributing much of the literature on this subject to the industry. This new volume is a presentation of some of the most cutting-edge technological advances in technical publishing. This is the most comprehensive and in-depth book on this subject, covering not just the various materials and their aspects that make them different, but every process that goes into their installation, operation, and design. The thirty-six chapters, divided up into four different parts, have had not just the authors of this text but literally dozens of other engineers who are some of the world's leading scientists in this area contribute to the work. This is the future of pipelines, and it is an important breakthrough. A must-have for the veteran engineer and student alike, this volume is an important new advancement in the energy industry, a strong link in the chain of the world's energy production.
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Technical Guidance for Petroleum Exploration and Production Plans written by Tarek Al-Arbi Omar Ganat and published by Springer Nature. This book was released on 2020-03-31 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents detailed explanations of how to formulate field development plans for oil and gas discovery. The data and case studies provided here, obtained from the authors’ field experience in the oil and gas industry around the globe, offer a real-world context for the theories and procedures discussed. The book covers all aspects of field development plan processes, from reserve estimations to economic analyses. It shows readers in both the oil and gas industry and in academia how to prepare field development plans in a straightforward way, and with substantially less uncertainty.
Download or read book Liquid Pipeline Hydraulics written by E. Shashi Menon Ph.D. P.E and published by Trafford Publishing. This book was released on 2013-04-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers liquid pipeline hydraulics as it applies to transportation of liquids through pipelines in a single phase steady state environment. It will serve as a practical handbook for engineers, technicians and others involved in design and operation of pipelines transporting liquids. Currently, existing books on the subject are mathematically rigorous, theoretical and lack practical applications. Using this book, engineers can better understand and apply the principles of hydraulics to their daily work in the pipeline industry without resorting to complicated formulas and theorems. Numerous examples from the author’s real life experience are included to illustrate application of pipeline hydraulics.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
