Download or read book Piezoresistive Effect of p Type Single Crystalline 3C SiC written by Hoang-Phuong Phan and published by Springer. This book was released on 2017-04-06 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the piezoresistance in p-type 3C-SiC, which it investigates using experimental characterization and theoretical analysis. The gauge factor, the piezoresistive coefficients in two-terminal and four-terminal resistors, the comparison between single crystalline and nanocrystalline SiC, along with the temperature dependence of the piezoresistive effect in p-type 3C-SiC are also discussed. Silicon carbide (SiC) is an excellent material for electronic devices operating at high temperatures, thanks to its large energy band gap, superior mechanical properties and extreme chemical inertness. Among the numerous polytypes of SiC, the cubic single crystal, which is also well known as 3C-SiC, is the most promising platform for microelectromechanical (MEMS) applications, as it can be epitaxially grown on an Si substrate with diameters of up to several hundred millimeters. This feature makes 3C-SiC compatible with the conventional Si-based micro/nano processing and also cuts down the cost of SiC wafers. The investigation into the piezoresistive effect in 3C-SiC is of significant interest for the development of mechanical transducers such as pressure sensors and strain sensors used for controlling combustion and deep well drilling. Although a number of studies have focused on the piezoresistive effect in n-type 3C-SiC, 4H-SiC and 6H-SiC, comparatively little attention has been paid to piezoresistance in p-type 3C-SiC. In addition, the book investigates the piezoresistive effect of top-down fabricated SiC nanowires, revealing a high degree of sensitivity in nanowires employing an innovative nano strain-amplifier. The large gauge factors of the p-type 3C-SiC at both room temperature and high temperatures found here indicate that this polytype could be suitable for the development of mechanical sensing devices operating in harsh environments with high temperatures.

Download or read book Sustainable Design and Manufacturing 2018 written by Dzung Dao and published by Springer. This book was released on 2018-11-30 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 5th International Conference on Sustainable Design and Manufacturing (SDM-18), held in Gold Coast, Australia in June 2018. The conference covered a wide range of topics, including: sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research on the circular economy. The corresponding application areas are wide and varied. The aim of cutting-edge research into sustainable design and manufacturing is to enable the manufacturing industry to grow by adopting more advanced technologies, and at the same time improve its sustainability by reducing its environmental impact. With these goals in mind, the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Modern Sensing Technologies written by Subhas Chandra Mukhopadhyay and published by Springer. This book was released on 2018-08-24 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of modern sensing technologies and reflects the remarkable advances that have been made in the field of intelligent and smart sensors, environmental monitoring, health monitoring, and many other sensing and monitoring contexts in today’s world. It addresses a broad range of aspects, from human health monitoring to the monitoring of environmental conditions, from wireless sensor networks and the Internet of Things to structural health monitoring. Given its breadth of scope, the book will benefit researchers, practitioners, technologists and graduate students involved in the monitoring of systems within the human body, functions and activities, healthcare technologies and services, the environment, etc.

Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.

Download or read book Nanowire Electronics written by Guozhen Shen and published by Springer. This book was released on 2018-11-23 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of recent advances in developing nanowires for building various kinds of electronic devices. Specifically the applications of nanowires in detectors, sensors, circuits, energy storage and conversion, etc., are reviewed in detail by the experts in this field. Growth methods of different kinds of nanowires are also covered when discussing the electronic applications. Through discussing these cutting edge researches, the future directions of nanowire electronics are identified.

Download or read book Physics of Semiconductor Devices written by Simon M. Sze and published by John Wiley & Sons. This book was released on 2021-03-19 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of the most detailed and comprehensive single-volume reference on major semiconductor devices The Fourth Edition of Physics of Semiconductor Devices remains the standard reference work on the fundamental physics and operational characteristics of all major bipolar, unipolar, special microwave, and optoelectronic devices. This fully updated and expanded edition includes approximately 1,000 references to original research papers and review articles, more than 650 high-quality technical illustrations, and over two dozen tables of material parameters. Divided into five parts, the text first provides a summary of semiconductor properties, covering energy band, carrier concentration, and transport properties. The second part surveys the basic building blocks of semiconductor devices, including p-n junctions, metal-semiconductor contacts, and metal-insulator-semiconductor (MIS) capacitors. Part III examines bipolar transistors, MOSFETs (MOS field-effect transistors), and other field-effect transistors such as JFETs (junction field-effect-transistors) and MESFETs (metal-semiconductor field-effect transistors). Part IV focuses on negative-resistance and power devices. The book concludes with coverage of photonic devices and sensors, including light-emitting diodes (LEDs), solar cells, and various photodetectors and semiconductor sensors. This classic volume, the standard textbook and reference in the field of semiconductor devices: Provides the practical foundation necessary for understanding the devices currently in use and evaluating the performance and limitations of future devices Offers completely updated and revised information that reflects advances in device concepts, performance, and application Features discussions of topics of contemporary interest, such as applications of photonic devices that convert optical energy to electric energy Includes numerous problem sets, real-world examples, tables, figures, and illustrations; several useful appendices; and a detailed solutions manual for Instructor's only Explores new work on leading-edge technologies such as MODFETs, resonant-tunneling diodes, quantum-cascade lasers, single-electron transistors, real-space-transfer devices, and MOS-controlled thyristors Physics of Semiconductor Devices, Fourth Edition is an indispensable resource for design engineers, research scientists, industrial and electronics engineering managers, and graduate students in the field.

Download or read book Thermoelectrical Effect in SiC for High Temperature MEMS Sensors written by Toan Dinh and published by Springer. This book was released on 2018-10-05 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamentals of the thermoelectrical effect in silicon carbide (SiC), including the thermoresistive, thermoelectric, thermocapacitive and thermoelectronic effects. It summarizes the growth of SiC, its properties and fabrication processes for SiC devices and introduces the thermoelectrical sensing theories in different SiC morphologies and polytypes. Further, it reviews the recent advances in the characterization of the thermoelectrical effect in SiC at high temperatures. Discussing several desirable features of thermoelectrical SiC sensors and recent developments in these sensors, the book provides useful guidance on developing high sensitivity and linearity, fast-response SiC sensing devices based on thermoelectrical effects.

Download or read book Proceedings of the 42nd International Conference on Advanced Ceramics and Composites Ceramic Engineering and Science Proceedings written by Jingyang Wang and published by John Wiley & Sons. This book was released on 2018-11-27 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceeding of the 42nd International Conference on Advanced Ceramics and Composites, Ceramic Engineering and Science Proceedings Volume 39, Issue 3, 2018 Jingyang Wang, Waltraud Kriven, Tobias Fey, Paolo Colombo, William J. Weber, Jake Amoroso, William G. Fahrenholtz, Kiyoshi Shimamura, Michael Halbig, Soshu Kirihara, Yiquan Wu, and Kathleen Shurgart, Editors Valerie Wiesner and Manabu Fukushima, Volume Editors This proceedings contains a collection of 22 papers from The American Ceramic Society’s 42nd International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 21-26, 2018. This issue includes papers presented in the following symposia: • Advancing Frontiers of Ceramics for Sustainable Societal Development – International Symposium in Honor of Dr. Mrityunjay Singh • Symposium 9: Porous Ceramics: Novel Developments and Applications • Symposium 10: Virtual Materials (Computational) Design and Ceramic Genome • Symposium 12 Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) • Symposium 13 Advanced Ceramics and Composites for Nuclear Fission and Fusion Energy • Symposium 14 Crystalline Materials for Electrical, Optical and Medical Applications • Symposium 15 Additive Manufacturing and 3D Printing Technologies • Symposium 16: Geopolymers, Inorganic Polymers and Sustainable Materials • Focused Session 1: Bio-inspired Processing of Advanced Materials • 7th Global Young Investigator Forum

Download or read book Graphene Rubber Nanocomposites written by Titash Mondal and published by CRC Press. This book was released on 2022-10-24 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides up-to-date information and research on graphene-rubber nanocomposites Presents a detailed account of the different niche applications ranging from sensors, flexible electronics to thermal, and EMI shielding materials Offers a comprehensive know-how on the structure-property relationship of graphene-rubber nanocomposites Covers the characterization of graphene-based elastomeric composition Delivers a comprehensive understanding of the structure of the graphene, including its chemical modification for usage in elastomer composites

Download or read book Silicon Carbide written by Moumita Mukherjee and published by BoD – Books on Demand. This book was released on 2011-10-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.

Download or read book Understanding MEMS written by Luis Castañer and published by John Wiley & Sons. This book was released on 2015-10-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continued advancement of MEMS (micro-electro-mechanical systems) complexity, performance, commercial exploitation and market size requires an ever-expanding graduate population with state-of-the-art expertise. Understanding MEMS: Principles and Applications provides a comprehensive introduction to this complex and multidisciplinary technology that is accessible to senior undergraduate and graduate students from a range of engineering and physical sciences backgrounds. Fully self-contained, this textbook is designed to help students grasp the key principles and operation of MEMS devices and to inspire advanced study or a career in this field. Moreover, with the increasing application areas, product categories and functionality of MEMS, industry professionals will also benefit from this consolidated overview, source of relevant equations and extensive solutions to problems. Key features: Details the fundamentals of MEMS, enabling readers to understand the basic governing equations and know how they apply at the micron scale. Strong pedagogical emphasis enabling students to understand the fundamentals of MEMS devices. Self-contained study aid featuring problems and solutions. Book companion website hosts Matlab and PSpice codes and viewgraphs.

Download or read book Piezoresistive Effect in Diamond like Carbon Films written by Arti Tibrewala and published by Cuvillier Verlag. This book was released on 2006 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.

Download or read book Bioelectronics written by Anuj Kumar and published by CRC Press. This book was released on 2022-12-08 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioelectronics is emerging as a new area of research where electronics can selectively detect, record, and monitor physiological signals. This is a rapidly expanding area of medical research, that relies heavily on multidisciplinary technology development and cutting-edge research in chemical, biological, engineering, and physical science. This book provides extensive information on the (i) fundamental concepts of bioelectronics, (ii) materials for the developments of bioelectronics such as implantable electronics, self-powered devices, bioelectronic sensors, flexible bioelectronics, etc, and (iii) an overview of the trends and gathering of the latest bioelectronic progress. This book will broaden our knowledge about newer technologies and processes used in bioelectronics.

Download or read book The 1992 NASA Langley Measurement Technology Conference written by Jag J. Singh and published by . This book was released on 1992 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wide Bandgap Nanowires written by Tuan Anh Pham and published by John Wiley & Sons. This book was released on 2022-07-04 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIDE BANDGAP NANOWIRES Comprehensive resource covering the synthesis, properties, and applications of wide bandgap nanowires This book presents first-hand knowledge on wide bandgap nanowires for sensor and energy applications. Taking a multidisciplinary approach, it brings together the materials science, physics and engineering aspects of wide bandgap nanowires, an area in which research has been accelerating dramatically in the past decade. Written by four well-qualified authors who have significant experience in the field, sample topics covered within the work include: Nanotechnology-enabled fabrication of wide bandgap nanowires, covering bottom-up, top-down and hybrid approaches Electrical, mechanical, optical, and thermal properties of wide bandgap nanowires, which are the basis for realizing sensor and energy device applications Measurement of electrical conductivity and fundamental electrical properties of nanowires Applications of nanowires, such as in flame sensors, biological sensors, and environmental monitoring For materials scientists, electrical engineers and professionals involved in the semiconductor industry, this book serves as a completely comprehensive resource to understand the topic of wide bandgap nanowires and how they can be successfully used in practical applications.

Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.