Download or read book Applied Aspects of Nanophysics and Nano engineering written by Kirill Levine and published by . This book was released on 2019-03-26 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of a book Applied Aspects of Nanophysics and Nano-engineering is partially composed of short communications proceedings of international symposium Nanophysics and nano-engineering 2017 (venue: Mining university), and full-sized chapters, covering selected topics in depth. A variety of phenomena are described in this book. Smart nanostructured coatings, methods of synthesis based on both top to bottom (plasma deposition, remote methods) and bottom to top approaches are covered, as well as modeling approaches and analytical techniques. As before, ecological issues are highly addressed, such as materials for water purification and pollution prevention. Permanent interest in fullerenes as to one-dimensional carbon-based structures arises from their ability to be relatively easily modified by species of interest, for the purpose of bio-substrate delivery. Graphite exfoliation is utilized as a method to produce graphite nanoparticles and the modelling of fullers is reported. Issues of dielectric relaxation of solids have been a stunning topic for at least a few decades, and even now the interest in the dielectric relaxation approach seems to increase. This is because of the sensitivity of this non-destructive method to the conformational changes of flexible molecular moieties, brushes, and interchain segments. This avenue was focused on materials appliances of the method and technical development of the method and resolution, as well as the materials studied. Semiconductor technologies discussed in the book were related to developing solar concentrator systems (silicon technologies), heterojunction solar cells of eutectic gallium arsenide solid solutions for the development of alternative heterostructures based on the tunneling effect. Exotic semiconductors diamonds with delta-doped layers known for their high temperature resistance are studied via capacitance measurements. Directional crystallization was studied to produce rear-Earth compounds with anisotropic properties for the application of thermoelectric materials. Findings in sorption properties of clay minerals with singlet oxygen is underestimated as global in terms of environmental factors. Oil shale and oil shale ash Baltic basin studies are reported. Materials with magnetic properties synthesized by the sol-gel method are based on varrium-titanium ceramic and are studied via a variety of powerful experimental methods: SEM, XRD, SAXC, and SAPNS. Findings in the surface modification of zinc oxide films are modified by selenium. A special experimental setup is made possible using an ambient pressure approach without isolating the atmosphere to synthesize the hierarchically ordered surface structure. Interface properties related to water absorption on an aluminum surface are analyzed, and they are of interest for tribology applications of organopolymer compositions. Composite nanostructured materials for solar concentrator systems are discussed, as well as compounds for thermionic energy converters. It is believed that this book provides an unbiased sketch of progress in nanotechnology and related areas.

Download or read book Physics and Technology of Nanostructured Materials V written by Nikolay G. Galkin and published by Trans Tech Publications Ltd. This book was released on 2020-11-11 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected full text papers from the 5th Asian School-Conference on Physics and Technology of Nanostructured Materials (ASCO-Nanomat 2020) Selected, peer-reviewed papers from the 5th Asian School-Conference on Physics and Technology of Nanostructured Materials (ASCO-Nanomat 2020), July 30 - August 3, 2020, Vladivostok, Russian Federation

Download or read book Physics and Technology of Nanostructured Materials IV Supplement Book written by Nikolay G. Galkin and published by Trans Tech Publications Ltd. This book was released on 2019-06-11 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4th Asian School-Conference on Physics and Technology of Nanostructured Materials (ASCO-NANOMAT 2018) Selected, peer reviewed papers from the 4th Asian School-Conference on Physics and Technology of Nanostructured Materials (ASCO-NANOMAT), September 23-28, 2018, Vladivostok, Russia

Download or read book Nanostructured Materials by High Pressure Severe Plastic Deformation written by Yuntian T. Zhu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, it was reported that nanostructured materials processed under high pressure by HPT and ECAP have an extraordinary combination of both high strength and high ductility, which are two desirable, but rarely co-existing properties. These findings indicate that high-pressure is a critical factor that can be employed to process nanostructured materials with superior mechanical, and possibly also physical, properties. It is the objective of this workshop to review our current knowledge, identify issues for future research, and discuss future directions on the processing and properties of nanostructured materials via SPD techniques, with a special emphasis on high-pressure effects. The 42 peer-reviewed papers in this book cover areas of high pressure effect on the nanostructure and properties of SPD-processed materials, fundamentals of nanostructured materials, development of high-pressure SPD technologies for commercializations, recent advances of SPD technologies as well as applications and future markets of SPD-processed nanostructured materials.

Download or read book Nanostructured Materials for Solar Energy Conversion written by Tetsuo Soga and published by Elsevier. This book was released on 2006-12-14 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Materials for Solar Energy Conversion covers a wide variety of materials and device types from inorganic materials to organic materials. This book deals with basic semiconductor physics, modelling of nanostructured solar cell, nanostructure of conventional solar cells such as silicon, CIS and CdTe, dye-sensitized solar cell, organic solar cell, photosynthetic materials, fullerene, extremely thin absorber (ETA) solar cell, quantum structured solar cell, intermediate band solar cell, carbon nanotube, etc. including basic principle and the latest results. There are many books written on conventional p-n junction solar cells, but few books focus on new concepts in this area.* Focuses on the use of nanostructured materials for solar energy* Looks at a wide variety of materials and device types* Covers both organic and inorganic materials

Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.

Download or read book From Bulk to Nano written by Carmen-Gabriela Stefanita and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspiration for this book can be traced back many years to two major works that in?uenced the author’s outlook on applied physics: FerromagnetismusbyR. Becker,W. D ̈ oring (Springer, Berlin 1939), and Ferromagnetism by R. M. Bozorth (IEEE Press, New York 1951). The former work is a collection of lectures held in the 1930s for ‘technicians’ attending a technical college. The German language in which the work was originally written was extremely convenient for the author of this present book, as it was for a long time the only comfortable technical language in an English speaking environment. Later on, upon encountering the work by Bozorth, it was a relief to see the clarity and eloquence of the subjects presented in English, despite the impressive thickness of the book. Bozorth’s work still constitutes a practical review for anyone in a multidisciplinary industry who comes across the various manifestations of magnetism. The popularity of both works is so enduring that they are regarded as highly academic, and yet extremely readable, a reference in their own right, still attracting many readers these days in industry and academia. The ?eld of magnetism progressed immensely in the twentieth century, and shows no signs of slowing down in the present one. It has become so vast that it is quite often viewed only in its parts, rather than as a whole. In today’smyriadofapplications,especiallyonananoscale,andtheirchangeable implications mostly on a macroscale, it often seems that di?erent aspects of reported work on magnetism are scattered and unrelated.

Download or read book Nanostructured Materials and Nanotechnology written by Hari Singh Nalwa and published by Gulf Professional Publishing. This book was released on 2002 with total page 859 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology Provides comprehensive coverage of the dominant technology of the 21st century Written by a truly international list of contributors.

Download or read book Functional Nanomaterials and their Applications written by Hardev Singh Virk and published by Trans Tech Publications Ltd. This book was released on 2013-05-14 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special topic volume with invited peer reviewed papers only.

Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.

Download or read book Nanostructured Materials and Nanotechnology VI Volume 33 Issue 7 written by Sanjay Mathur and published by John Wiley & Sons. This book was released on 2012-11-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue features fourteen peer-reviewed papers originating from The 6th International Symposium on Nanostructured Materials and Nanotechnology. It includes Nanostructured coatings by cluster beam deposition; a new greener synthetic route to cadmium/lead selenide and telluride nanoparticles; and much more. Held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC), the symposium covered a broad range of issues, including synthesis, processing, modeling, and structure-property correlations in nanomaterials and nanocomposites, enabling scientists, engineers, and technologists from around the world to explore the latest developments in the field.

Download or read book Einstein Relation in Compound Semiconductors and Their Nanostructures written by Kamakhya Prasad Ghatak and published by Springer Science & Business Media. This book was released on 2008-11-16 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing only on the Einstein relation in compound semiconductors and their nanostructures, this book deals with open research problems from carbon nanotubes to quantum wire superlattices with different band structures, and other field assisted systems.

Download or read book Nano Science and Technology written by Ping Sheng and published by CRC Press. This book was released on 2003-03-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience and technology is a rapidly developing area of research in physics, chemistry, and materials. This volume comsists of papers presented at the Advanced Study Institute in Hong Kong that explore developments in novel structures in phenomena of nanostructured materials. The topics include: two-dimensional nanoclusters on met

Download or read book Nanoengineered Nanofibrous Materials written by Selcuk Guceri and published by Springer Science & Business Media. This book was released on 2005-09-15 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of conductive polymer technology with the ability to produce nanofibres will facilitate major new developments in biotechnology and information technology, benefiting such areas as scaffolds for tissue engineering and drug delivery systems; wires, capacitors, transistors and diodes; sensor technology; biohazard protection; and energy transport, conversion and storage. The work on nanofibrous materials presented here is designed, first of all, to instruct scientists in the most advanced methods for the formation of nanofibres and nanotubes. The second section covers the physics and chemistry of nanofibres, while the third deals with computer simulation and modelling. The applications described in section 4 include biomedical applications, nanotube-based devices, electronic applications of nanotubes and nanofibres, nanofluidics, and composites. Finally, the fifth section discusses recent developments in nanomaterials, nanoparticles and nanostructures.

Download or read book Advances in Thin Films Nanostructured Materials and Coatings written by Alexander D. Pogrebnjak and published by Springer. This book was released on 2019-02-08 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advances in chemical and physical methods for thin-film deposition and surface engineering, including ion- and plasma-assisted processes, focusing on explaining the synthesis/processing–structure–properties relationship for a variety of thin-film systems. It covers topics such as advances in thin-film synthesis; new thin-film materials: diamond-like films, granular alloys, high-entropy alloys, oxynitrides, and intermetallic compounds; ultra-hard, wear- and oxidation-resistant and multifunctional coatings; superconducting, magnetic, semiconducting, and dielectric films; electrochemical and electroless depositions; thin-film characterization and instrumentation; and industrial applications.

Download or read book Nanostructures And Nanomaterials Synthesis Properties And Applications 2nd Edition written by Guozhong Cao and published by World Scientific Publishing Company. This book was released on 2011-01-03 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the original “Nanostructures and Nanomaterials” written by Guozhong Cao and published by Imperial College Press in 2004.This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.

Download or read book Nanoscale Science and Technology written by Robert Kelsall and published by John Wiley & Sons. This book was released on 2005-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a vital new area of research and development addressing the control, modification and fabrication of materials, structures and devices with nanometre precision and the synthesis of such structures into systems of micro- and macroscopic dimensions. Future applications of nanoscale science and technology include motors smaller than the diameter of a human hair and single-celled organisms programmed to fabricate materials with nanometer precision. Miniaturisation has revolutionised the semiconductor industry by making possible inexpensive integrated electronic circuits comprised of devices and wires with sub-micrometer dimensions. These integrated circuits are now ubiquitous, controlling everything from cars to toasters. The next level of miniaturisation, beyond sub-micrometer dimensions into nanoscale dimensions (invisible to the unaided human eye) is a booming area of research and development. This is a very hot area of research with large amounts of venture capital and government funding being invested worldwide, as such Nanoscale Science and Technology has a broad appeal based upon an interdisciplinary approach, covering aspects of physics, chemistry, biology, materials science and electronic engineering. Kelsall et al present a coherent approach to nanoscale sciences, which will be invaluable to graduate level students and researchers and practising engineers and product designers.