Download or read book Physicochemical Aspects of Food Engineering and Processing written by Sakamon Devahastin and published by CRC Press. This book was released on 2010-08-03 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical and chemical interactions between various constituents resulting from processing operations often lead to physical, sensory, and nutritional changes in foods. Combining important information on processing and food quality, Physicochemical Aspects of Food Engineering and Processing describes the effects of various processing technologies on
Download or read book Food Processing Technologies written by Amit K. Jaiswal and published by CRC Press. This book was released on 2016-08-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of food generally implies the transformation of the perishable raw food to value-added products. It imparts benefits, such as the destruction of surface microflora, and inactivation of deleterious enzymes, such as peroxidase, leading to a greater shelf life of the food. It also enhances color and texture while maintaining quality of products and makes them edible. However, it also has an inevitable impact on nutritional quality attributes, such as increase or decrease in certain vitamins and bioactive metabolites among others. Food Processing Technologies: Impact on Product Attributes covers a range of food processing technologies and their effect on various food product attributes, such as bioactive compounds, safety, and sensory and nutritional aspects of the food upon processing. There are eight major parts in the book. Part I covers the conventional processing technologies. Parts II, III, IV, and V deal with various novel processing technologies, including impingement processing technologies, electro-magnetic processing technologies, physico-mechanical processing technologies, and electro-technologies. Part VI introduces chemical processing technologies. Part VII comprise irradiation processing technology, and the final part is focused on biological processing technology, detailing the application of enzymes in food processing. Numerous studies were carried out to find the impact of these processing technologies on various aspects of food and associated health promotion properties. Both positive and negative results were obtained based on nature of foods, processing type, and duration of processing, and this book covers these results in depth.
Download or read book Processing Effects on Safety and Quality of Foods written by Enrique Ortega-Rivas and published by CRC Press. This book was released on 2009-10-08 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers a Host of Groundbreaking TechniquesThermal processing is known to effectively control microbial populations in food, but the procedure also has a downsideit can break down the biochemical composition of foods, resulting in a marked loss of sensory and nutritional quality. Processing Effects on Safety and Quality of Foods delineates three dec
Download or read book Food Engineering Handbook Two Volume Set written by Theodoros Varzakas and published by CRC Press. This book was released on 2014-12-12 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Engineering Handbook, Two-Volume Set provides a stimulating and up-to-date review of food engineering phenomena. It also addresses the basic and applied principles of food engineering methods used in food processing operations around the world. Combining theory with a practical, hands-on approach, this set examines the thermophysical propertie
Download or read book Introduction to Advanced Food Process Engineering written by Jatindra Kumar Sahu and published by CRC Press. This book was released on 2014-03-24 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food materials are processed prior to their consumption using different processing technologies that improve their shelf life and maintain their physicochemical, biological, and sensory qualities. Introduction to Advanced Food Process Engineering provides a general reference on various aspects of processing, packaging, storage, and quality control and assessment systems, describing the basic principles and major applications of emerging food processing technologies. The book is divided into three sections, systematically examining processes from different areas of food process engineering. Section I covers a wide range of advanced food processing technologies including osmo-concentration of fruits and vegetables, membrane technology, nonthermal processing, emerging drying technologies, CA and MA storage of fruits and vegetables, nanotechnology in food processing, and computational fluid dynamics modeling in food processing. Section II describes food safety and various non-destructive quality assessment systems using machine vision systems, vibrational spectroscopy, biosensors, and chemosensors. Section III explores waste management, by-product utilization, and energy conservation in food processing industry. With an emphasis on novel food processes, each chapter contains case studies and examples to illustrate state-of-the-art applications of the technologies discussed.
Download or read book Food Powders written by Enrique Ortega-Rivas and published by Springer Science & Business Media. This book was released on 2006-04-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful reference is the first book to address key aspects of food powder technology. It assembles organized and updated information on the physical properties, production, and functionality of food powder, previously unavailable in book form.
Download or read book Food Engineering Handbook written by Theodoros Varzakas and published by CRC Press. This book was released on 2014-11-24 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Engineering Handbook: Food Process Engineering addresses the basic and applied principles of food engineering methods used in food processing operations around the world. Combining theory with a practical, hands-on approach, this book examines the thermophysical properties and modeling of selected processes such as chilling, freezing, and dehy
Download or read book Biopolymer Engineering in Food Processing written by Vania Regina Nicoletti Telis and published by CRC Press. This book was released on 2012-05-29 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their unique properties and ability to interact with other food components, biopolymers have traditionally played a major role in food processing. Biopolymer Engineering in Food Processing explores processing technology associated with biopolymer applications and discusses both operational and economic aspects. Following an overview of biopolymer applications and their functionality in different processes, the text examines: Production routes, availability, costs, and physicochemical properties of commercial biopolymers Rheology of biopolymer suspensions, how concentration and shear may affect their flow behavior, and their response to pressure losses and heat transfer during flow Effects of food processing and storage conditions on the viscoelastic and textural properties of food gels Mechanical and mass transfer properties of films and coating produced from biopolymers, composites, and nanocomposites The use of biopolymer coatings to reduce oil uptake during deep-fat frying of foods and in modified atmosphere storage of foods The book also explores the application of biopolymers in separation processes for recovery of biocompounds. It discusses biopolymer behavior during thermoplastic extrusion and the response of certain cereals and snacks to extrusion operating parameters. Finally, it reviews engineering aspects of biopolymers used as drying aids in spray-drying and freeze-drying of fruit juices and pulps and discusses biopolymers used as cryoprotectants in food freezing. A comprehensive source of scientific and technical information for those involved with process design and research and development, the book is also an ideal reference for academic researchers and undergraduate and postgraduate students.
Download or read book Handbook of Food Processing written by Theodoros Varzakas and published by CRC Press. This book was released on 2015-10-22 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packed with case studies and problem calculations, Handbook of Food Processing: Food Safety, Quality, and Manufacturing Processes presents the information necessary to design food processing operations and describes the equipment needed to carry them out in detail. It covers the most common and new food manufacturing processes while addressing rele
Download or read book Handbook of Food Processing Two Volume Set written by Theodoros Varzakas and published by CRC Press. This book was released on 2015-11-04 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by world experts, the Handbook of Food Processing, Two-Volume Set discusses the basic principles and applications of major commercial food processing technologies. The handbook discusses food preservation processes, including blanching, pasteurization, chilling, freezing, aseptic packaging, and non-thermal food processing. It describes com
Download or read book Introduction to Food Process Engineering written by Albert Ibarz and published by CRC Press. This book was released on 2014-04-10 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consumer expectations are systematically growing, with demands for foods with a number of attributes, which are sometimes difficult for manufacturers to meet. The engineering processes that are needed to obtain top-quality foods are a major challenge due to the diversity of raw materials, intermediates, and final products. As in any other enterprise, the food industry must optimize each of the steps in the production chain to attain the best possible results. There is no question that a very important aspect to take into consideration when developing a process, designing a food factory, or modifying existing facilities is the in-depth knowledge of the basic engineering aspects involved in a given project. Introduction to Food Process Engineering covers the fundamental principles necessary to study, understand, and analyze most unit operations in the food engineering domain. It was conceived with two clear objectives in mind: 1) to present all of the subjects in a systematic, coherent, and sequential fashion in order to provide an excellent knowledge base for a number of conventional and unconventional processes encountered in food industry processing lines, as well as novel processes at the research and development stages; 2) to be the best grounding possible for another CRC Press publication, Unit Operations in Food Engineering, Second Edition, by the same authors. These two books can be consulted independently, but at the same time, there is a significant and welcomed match between the two in terms of terminology, definitions, units, symbols, and nomenclature. Highlights of the book include: Dimensional analysis and similarities Physicochemistry of food systems Heat and mass transfer in food Food rheology Physical properties Water activity Thermal processing Chilling and freezing Evaporation Dehydration Extensive examples, problems, and solutions
Download or read book Food Process Engineering Operations written by George D. Saravacos and published by CRC Press. This book was released on 2011-04-11 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and interdisciplinary field, food processing must meet basic process engineering considerations such as material and energy balances, as well as the more specialized requirements of food acceptance, human nutrition, and food safety. Food engineering, therefore, is a field of major concern to university departments of food science, and chemical and biological engineering as well as engineers and scientists working in various food processing industries. Part of the notable CRC Press Contemporary Food Engineering series, Food Process Engineering Operations focuses on the application of chemical engineering unit operations to the handling, processing, packaging, and distribution of food products. Chapters 1 through 5 open the text with a review of the fundamentals of process engineering and food processing technology, with typical examples of food process applications. The body of the book then covers food process engineering operations in detail, including theory, process equipment, engineering operations, and application examples and problems. Based on the authors’ long teaching and research experience both in the US and Greece, this highly accessible textbook employs simple diagrams to illustrate the mechanism of each operation and the main components of the process equipment. It uses simplified calculations requiring only elementary calculus and offers realistic values of food engineering properties taken from the published literature and the authors’ experience. The appendix contains useful engineering data for process calculations, such as steam tables, engineering properties, engineering diagrams, and suppliers of process equipment. Designed as a one or two semester textbook for food science students, Food Process Engineering Operations examines the applications of process engineering fundamentals to food processing technology making it an important reference for students of chemical and biological engineering interested in food engineering, and for scientists, engineers, and technologists working in food processing industries.
Download or read book Physical Properties of Foods written by Serpil Sahin and published by Springer Science & Business Media. This book was released on 2007-05-27 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental understanding of physical properties of foods. It is the first textbook in this area and combines engineering concepts and physical chemistry. Basic definitions and principles of physical properties are discussed as well as the importance of physical properties in the food industry and measurement methods. In addition, recent studies in physical properties are summarized. The material presented is helpful for students to understand the relationship between physical and functional properties of raw, semi-finished, and processed food in order to obtain products with desired shelf-life and quality.
Download or read book Physical Properties of Foods written by Ignacio Arana and published by CRC Press. This book was released on 2012-02-27 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: With higher food quality in increasing demand by consumers, there is continuous pressure on food engineers to meet market needs. One of the critical challenges is to use modern technology and knowledge to develop new processes for improving food quality. Given the global food marketplace, there is also a greater need for a means of objectively classifying and differentiating foods. Physical properties, determined by measurable physical parameters, profoundly affect food quality and can be used for these determinations. Physical Properties of Foods: Novel Measurement Techniques and Applications presents a wide range of these practical, low-cost techniques to characterize physical properties without destroying the food. The book presents principles and measurement techniques, highlighting the latest methods and their ability to replace the traditional costly, time-consuming ones. It also covers the application of the measurements to classify and differentiate various foods, including fruits, vegetables, cereals, and dairy and meat products. The text gathers up-to-date procedures for determining the most important physical parameters that characterize food quality, many of which have not previously been sufficiently described in the literature, and delivers them in one useful volume. It includes methods based on a variety of technologies such as electronics, spectroscopy, mechanics, and acoustic response—which can be applied to a wide range of foods. With a focus on practical application of novel techniques, chapters specify method details, the type of food to which it has been applied, the accuracy, its ability to replace traditional techniques, as well as whether it can be installed on line. Written by internationally renowned engineers and scientists, this reference offers crucial information in an easily accessible format for engineers, researchers, and those in the food industry—all who will benefit from the cutting-edge practices described for measuring parameters that affect food quality and food characterization. The text is also an excellent resource for students and university researchers.
Download or read book Re Engineering the Chemical Processing Plant written by Andrzej Stankiewicz and published by CRC Press. This book was released on 2018-12-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first guide to compile current research and frontline developments in the science of process intensification (PI), Re-Engineering the Chemical Processing Plant illustrates the design, integration, and application of PI principles and structures for the development and optimization of chemical and industrial plants. This volume updates professionals on emerging PI equipment and methodologies to promote technological advances and operational efficacy in chemical, biochemical, and engineering environments and presents clear examples illustrating the implementation and application of specific process-intensifying equipment and methods in various commercial arenas.
Download or read book Non thermal Food Engineering Operations written by Enrique Ortega-Rivas and published by Springer Science & Business Media. This book was released on 2012-02-25 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the advent and adaptation of food processing operations, processes and techniques which reduce, even eliminate the thermal component, resulting in microbiologically safe foods with minimum alteration in sensory and nutritive properties.
Download or read book Handbook of Frozen Food Processing and Packaging Second Edition written by Da-Wen Sun and published by CRC Press. This book was released on 2011-10-19 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: Consumer demand for a year-round supply of seasonal produce and ready-made meals remains the driving force behind innovation in frozen food technology. Now in its second edition, Handbook of Frozen Food Processing and Packaging explores the art and science of frozen foods and assembles essential data and references relied upon by scientists in universities and research institutions. Highlights in the Second Edition include: Original chapters revised and updated with the latest developments New section on Emerging Technologies in Food Freezing, with chapters on ultrasound accelerated freezing, high-pressure shift freezing, electrostatic field-assisted food freezing, and antifreeze proteins New section on Trends in Frozen Food Packaging, with chapters on active packaging, intelligent packaging, vacuum packaging, and edible coatings and films and their applications on frozen foods This volume continues the tradition of the benchmark first edition, capturing the latest developments on the cutting edge of frozen food science. In addition to updated coverage of quality and safety issues and monitoring and measuring techniques, it highlights emerging technologies and trends, all in the format that made the previous edition so popular. It offers the tools needed to develop new and better products, keeping up with consumer demand for safe and convenient frozen foods.
