Download or read book Physical surfaces written by J.J. Bikerman and published by Elsevier. This book was released on 2012-12-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Surfaces deals with the basic concepts of the physics of surfaces, including the nature of the surface pressure of unimolecular films and the equilibrium pressure of these films. The effect of particle size on capillary pressure, the surface energy and the cuticular energy of solids, and the fundamentals of wetting are also examined. This book is comprised of nine chapters and begins with a discussion on the mechanics and physical chemistry of liquid surfaces, with emphasis on capillarity and surface tension. The following chapters focus on liquid-liquid interfaces, foams and emulsions, and solid surfaces. Interfacial tension is analyzed in relation to miscibility and surface tension, along with contact angles in gas-liquid-liquid systems. The chapter on wetting looks at theories of contact angle, its measurement, and hysteresis. Adsorption and electric surface phenomena are also explored, together with adhesion and friction. This monograph will be a valuable resource for physical chemists and physicists.
Download or read book Introduction to Surface Physical Chemistry written by K. Christmann and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formal Ontology in Information Systems written by Antony Galton and published by IOS Press. This book was released on 2010 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ontology began life in ancient times as a fundamental part of philosophical enquiry concerned with the analysis and categorisation of what exists. In recent years, the subject has taken a practical turn with the advent of complex computerised information systems which are reliant on robust and coherent representations of their subject matter. The systematisation and elaboration of such representations and their associated reasoning techniques constitute the modern discipline of formal ontology, which is now being applied to such diverse domains as artificial intelligence, computational linguistics, bioinformatics, GIS, knowledge engineering, information retrieval and the Semantic Web. Researchers in all these areas are becoming increasingly aware of the need for serious engagement with ontology, understood as a general theory of the types of entities and relations making up their respective domains of enquiry, to provide a solid foundation for their work. The conference series Formal Ontology in Information Systems (FOIS) provides a meeting point for researchers from these and other disciplines with an interest in formal ontology, where both theoretical issues and concrete applications can be explored in a spirit of genuine interdisciplinarity. This volume contains the proceedings of the sixth FOIS conference, held in Toronto, Canada, during 11-14 May 2010, including invited talks by Francis Jeffry Pelletier, John Bateman, and Alan Rector and the 28 peer-reviewed submissions selected for presentation at the conference, ranging from foundational issues to more application-oriented topics. IOS Press is an international science, technical and medical publisher of high-quality books for academics, scientists, and professionals in all fields. Some of the areas we publish in: -Biomedicine -Oncology -Artificial intelligence -Databases and information systems -Maritime engineering -Nanotechnology -Geoengineering -All aspects of physics -E-governance -E-commerce -The knowledge economy -Urban studies -Arms control -Understanding and responding to terrorism -Medical informatics -Computer Sciences
Download or read book Physical and Numerical Models in Knot Theory written by Jorge Alberto Calvo and published by World Scientific. This book was released on 2005 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical properties of knotted and linked configurations in space have long been of interest to mathematicians. More recently, these properties have become significant to biologists, physicists, and engineers among others. Their depth of importance and breadth of application are now widely appreciated and valuable progress continues to be made each year. This volume presents several contributions from researchers using computers to study problems that would otherwise be intractable. While computations have long been used to analyze problems, formulate conjectures, and search for special structures in knot theory, increased computational power has made them a staple in many facets of the field. The volume also includes contributions concentrating on models researchers use to understand knotting, linking, and entanglement in physical and biological systems. Topics include properties of knot invariants, knot tabulation, studies of hyperbolic structures, knot energies, the exploration of spaces of knots, knotted umbilical cords, studies of knots in DNA and proteins, and the structure of tight knots. Together, the chapters explore four major themes: physical knot theory, knot theory in the life sciences, computational knot theory, and geometric knot theory.
Download or read book Lineament Material Representation and the Physical Figure in Architectural Production written by Gail Peter Borden and published by Routledge. This book was released on 2017-08-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive catalogue of contemporary work examines the renewed investment in the relationship between representation, materiality, and architecture. It assembles a range of diverse voices across various institutions, practices, generations, and geographies, through specific case studies that collectively present a broader theoretical intention.
Download or read book Aristotle s Theory of Bodies written by Christian Pfeiffer and published by Oxford University Press. This book was released on 2018-07-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Christian Pfeiffer explores an important, but neglected topic in Aristotle's theoretical philosophy: the theory of bodies. A body is a three-dimensionally extended and continuous magnitude bounded by surfaces. This notion is distinct from the notion of a perceptible or physical substance. Substances have bodies, that is to say, they are extended, their parts are continuous with each other and they have boundaries, which demarcate them from their surroundings. Pfeiffer argues that body, thus understood, has a pivotal role in Aristotle's natural philosophy. A theory of body is a presupposed in, e.g., Aristotle's account of the infinite, place, or action and passion, because their being bodies explains why things have a location or how they can act upon each other. The notion of body can be ranked among the central concepts for natural science which are discussed in Physics III-IV. The book is the first comprehensive and rigorous account of the features substances have in virtue of being bodies. It provides an analysis of the concept of three-dimensional magnitude and related notions like boundary, extension, contact, continuity, often comparing it to modern conceptions of it. Both the structural features and the ontological status of body is discussed. This makes it significant for scholars working on contemporary metaphysics and mereology because the concept of a material object is intimately tied to its spatial or topological properties.
Download or read book Perception and the Physical World written by D M Armstrong and published by Taylor & Francis. This book was released on 2023-07-28 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1961, Perception and the Physical World contends that there are insuperable difficulties for the Representative and Phenomenalist theories. Unreflective common sense thinks of sense-perception as a direct grasping of the nature of the physical world. But when we are confronted with facts about sensory illusion, about the physical and physiological causes of perception, and with modern scientific views of the real nature of matter, it is hard to maintain such a ‘Direct Realist’ theory of perception. We tend to substitute a Copy or Representative theory which puts sense-impressions between ourselves and physical reality. Some philosophers overwhelmed by the difficulties of the Copy theory, retreat into Phenomenalism, which identifies the physical world with our sense-impressions. The author re-examines all the traditional objections to a Direct Realist theory and tries to show that they can be overcome. This book will be of interest to students of philosophy.
Download or read book Surface and Interfacial Aspects of Biomedical Polymers written by J.D. Andrade and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to provide a fundamental basis for the study of the interaction of polymers with living systems, biochemicals, and with aqueous solutions. The surface chemistry and physics of polymeric materials is a subject not normally covered to any significant extent in classical surface chemistry textbooks. Many of the assumptions of classical surface chemistry are invalid when applied to polymer surfaces. Surface properties of polymers are important in the development of medical devices and diagnostic products. Surface properties are also of vital importance in fields such as adhesion, paints and coatings, polymer-filler interactions, heterogeneous catalysis, composites, and polymers for energy generation. The book begins with a chapter considering the current sources of information on polymer surface chemistry and physics. It moves on to consider the question of the dynamics of polymer surfaces and the implica tions of polymer surface dynamics on all subsequent characterization and interfacial studies. Two chapters are directed toward the question of model polymers for preparing model surfaces and interfaces. Complete treatments of X-ray photoelectron spectroscopy and attenuated total reflection infrared spectroscopy are given. There is a detailed treatment of the contact angle with particular emphasis on contact angle hysteresis in aqueous systems, followed by chapters on interfacial electrochemistry and interface acid-base charge-transfer properties. The very difficult problem of block and graft copolymer surfaces is also discussed. The problem of theoretical calculations of surface and interfacial tensions is presented. Raman spectroscopy is considered as an analytical technique for polymer surface characterization.
Download or read book The Engine of Visualization written by Patrick Maynard and published by Cornell University Press. This book was released on 2018-08-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first philosophical book wholly about photography, Patrick Maynard dispels some basic, persistent confusions by treating photography as a technology—a way to enhance and filter human power. Once photography is understood as a kind of technology, Maynard argues, insights about technology may be applied to provide the general perspective on photography that has been missing.
Download or read book Surface Chemistry of Froth Flotation written by S. Ramachandra Rao and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Surface chemistry of froth flotation / Jan Leja. c1982.
Download or read book Passive Solar Buildings written by J. Douglas Balcomb and published by MIT Press. This book was released on 1992 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes developments in passive solar technology that will save time, energy, and resources in planning for the buildings of the future.This companion to Passive Cooling and Solar Building Architecture (volumes 8 and 9) describes developments in passive solar technology that will save time, energy, and resources in planning for the buildings of the future. It is filled with tips and useful research for architects and designers and includes three substantial chapters on general modeling. Passive solar heating works. Properly designed and constructed, it is cost-effective, practical, comfortable, and aesthetic. Balcomb's introductory remarks set the tone for the rest of the contributions, which describe the considerable record of achievements in passive solar heating. Balcomb summarizes and evaluates the era between 1976 and 1983 when most of the major developments took place and highlights the design features that have contributed to effective buildings. Three chapters cover modeling passive systems (applicable to both heating and cooling), and six chapters focus on the application of passive solar heating, with emphasis on components, analytical results for specific systems, test modules, subsystem integration into buildings, performance monitoring and results, and design tools.J. Douglas Balcomb is a Principal Engineer with the Solar Energy Research Institute.
Download or read book Mathematical Techniques and Physical Applications written by J Killingbeck and published by Elsevier. This book was released on 2012-12-02 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Techniques and Physical Applications provides a wide range of basic mathematical concepts and methods, which are relevant to physical theory. This book is divided into 10 chapters that cover the different branches of traditional mathematics. This book deals first with the concept of vector, matrix, and tensor analysis. These topics are followed by discussions on several theories of series relevant to physics; the fundamentals of complex variables and analytic functions; variational calculus for presenting the basic laws of many branches of physics; and the applications of group representations. The final chapters explore some partial and integral equations and derivatives of physics, as well as the concept and application of probability theory. Physics teachers and students will greatly appreciate this book.
Download or read book Application of Modern Stratigraphic Techniques written by Kenneth Ratcliffe and published by SEPM Soc for Sed Geology. This book was released on 2010 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much has been written and debated about the various methodologies applied to modern stratigraphic analysis and the ever increasing complexity of terminologies. However, there exist numerous stratigraphic techniques that are reliant upon precise, quantitative, reproducible data, rather than qualitative interpretive stratigraphic methodologies. Such stratigraphic techniques are applied in an entirely pragmatic non-biased manner within the petroleum industry to provide enhanced stratigraphic understanding of petroleum systems. The petroleum industry is a key driver behind the development of new stratigraphic techniques and a major provider of new stratigraphic data, which has resulted in several of these new techniques having been developed as a requirement to the industry. Furthermore, because techniques, such as isotope chemostratigraphy, elemental chemostratigraphy, magnetic susceptibility stratigraphy, numerical biostratigraphy and heavy mineral stratigraphy are based around precise, quantified and reproducible analytical data, they provide an independent means to test the more interpretive stratigraphic methodologies. This volume attempts an overview of stratigraphic methodologies, but largely focuses on data-generative stratigraphic techniques such as chemostratigraphy, magnetic susceptibility stratigraphy, numerical biostratigraphy and heavy mineral stratigraphy. Where appropriate, each paper discusses data generation methods including sample preparation and analytical methods as well outlining data interpretation methods. This is followed by case histories that demonstrate how those data are used to resolve stratigraphic problems, commonly using material derived from petroleum basins around the World.
Download or read book Metal Clusters at Surfaces written by Karl-Heinz Meiwes-Broer and published by Springer Science & Business Media. This book was released on 2000-04-05 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous experiments and calculations have shown that isolated metal clusters possess many interesting features, quite different from those known from surface and solid- state physics or from atomic and molecular physics. The technological exploitation of these new properties, e.g. in miniature electronic or mechanical components, requires the cluster to be brought into an environment such as an encapsulating matrix or a surface. Due to the interaction with the contact medium, the properties of the clusters may change or even disappear. Thus the physics of cluster-on-surface systems -- the main subject of this book -- is of fundamental importance. The book addresses a wide audience, from the newcomer to the expert. Starting from fundamental concepts of adsorbate-surface interactions, the modification of electronic properties through electron confinement, and concepts of cluster production, it elucidates the distinct properties of the new metallic nanostructures.
Download or read book Nanotechnology written by Kit Cooley & Vic Lynn and published by Scientific e-Resources. This book was released on 2018-11-24 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has the potential to revolutionize the agricultural and food industry with new tools for the molecular treatment of diseases, rapid disease detection, enhancing the ability of plants to absorb nutrients etc. Nanotechnology combines solid state physics, chemistry, electrical engineering, chemical engineering, biochemistry and biophysics, and materials science. It is a highly interdisciplinary area meaning that it involves ideas integrated from many traditional discipline. Nanotechnology (NT) is the production and use of materials with purposely engineered features close to the atomic or molecular scale. NT deals with putting things together atom by atom and with structures so small they are invisible to the naked eye. It provides the ability to create materials, devices and systems with fundamentally new functions and properties. The promise of NT is enormous. It has implications for almost every type of manufacturing process and product. Nanomaterials have extremely small size which having at least one dimension 100 nm or less. Nanomaterials can be nanoscale in one dimension (e.g. surface films), two dimensions (e.g. strands or fibres), or three dimensions (e.g. particles). They can exist in single, fused, aggregated or agglomerated forms with spherical, tubular, and irregular shapes. Common types of nanomaterials include nanotubes, dendrimers, quantum dots and fullerenes. Nanoparticle research is currently an area of intense scientific research, due to a wide variety of potential applications in biomedical, optical, and electronic fields. Nanoparticles are of great scientific interest as they are effectively a bridge between bulk materials and atomic or molecular structures. A bulk material should have constant physical properties regardless of its size, but at the nano-scale this is often not the case. This book introduces the reader to the world of nanotechnology by giving them in-depth details of different aspects of the field.
Download or read book Physical Chemistry of Surfaces written by Arthur W. Adamson and published by John Wiley & Sons. This book was released on 1982 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Surface Thermodynamics written by A.W. Neumann and published by CRC Press. This book was released on 2010-10-13 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface thermodynamics forms the foundation of any meaningful study of capillarity and wetting phenomena. The second edition of Applied Surface Thermodynamics offers a comprehensive state-of-the-art treatment of this critical topic. It provides students and researchers with fundamental knowledge and practical guidelines in solving real-world proble
