Download or read book Physical Properties of High Temperature Superconductors III written by Donald M. Ginsberg and published by World Scientific. This book was released on 1992 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings the reader up to date on transport phenomena, including electrical and thermal conductivity and infrared properties. In addition, electron tunneling and the characteristics and applications of films are discussed; the preparation of the necessary samples has proceeded, and a sizeable body of reproducible data has become available. Pressure effects are also presented; considerable progress has been made in relating them to the crystallographic and electronic structure of high temperature superconductors. The preparation and characterization of bulk samples is also reviewed.
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperature superconductors, focusing on materials aspects; this timely book coincides with a recent major break-through of the discovery of iron-based superconductors. It provides an overview of materials aspects of high-temperature superconductors, combining introductory aspects, description of new physics, material aspects, and a description of the material properties This title is suitable for researchers in materials science, physics and engineering. Also for technicians interested in the applications of superconductors, e.g. as biomagnets
Download or read book Carbon at High Temperatures written by Alexander Savvatimskiy and published by Springer. This book was released on 2015-09-07 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the properties and behavior of carbon at high temperatures. It presents new methods and new ways to obtain the liquid phase of carbon. Melting of graphite and the properties of liquid carbon are presented under stationary heat and pulse methods. Metal like properties of molten graphite at high initial density are indicated. A new possible transition of liquid carbon from metal to nonmetal behavior much above the melting point is mentioned. Methodical questions of pulse heating, in particular the role of pinch-pressure in receiving a liquid state of carbon, are discussed. The reader finds evidence about the necessity of applying high pressure (higher than 100 bar) to melt graphite (melting temperature 4800±100 K). The reader can verify the advantage of volume pulse electrical heating before surface laser heating to study the physical properties of carbon, including enthalpy, heat capacity, electrical resistivity and temperature. The advantages of fast heating of graphite by pulsed electric current during a few microseconds are shown. The data obtained for the heat capacity of liquid carbon under constant pressure and constant volume were used to estimate the behavior at temperatures much higher 5000 K.
Download or read book Production Properties and Applications of High Temperature Coatings written by Pakseresht, Amir Hossein and published by IGI Global. This book was released on 2018-01-12 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat resistant layers are meant to withstand high temperatures while also protecting against all types of corrosion and oxidation. Therefore, the micro-structure and behavior of such layers is essential in understanding the functionality of these materials in order to make improvements. Production, Properties, and Applications of High Temperature Coatings is a critical academic publication which examines the methods of creation, characteristics, and behavior of materials used in heat resistant layers. Featuring coverage on a wide range of topics such as, thermal spray methods, sol-gel coatings, and surface nanoengineering, this book is geared toward students, academicians, engineers, and researchers seeking relevant research on the methodology and materials for producing effective heat resistant layers.
Download or read book Physical Properties Of High Temperature Superconductors I written by Donald M Ginsberg and published by World Scientific. This book was released on 1998-09-29 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: While a great effort has been made to discover new high temperature superconductors, a large-scale, parallel effort has been made to determine the fundamental properties of these fascinating new materials. This is perhaps one of the best books in the field describing these vital properties in an organized and comprehensive manner. The authors are well known for their creative and powerful research on the new superconductors. This volume will be a useful reference for research workers and for graduate students. A subject index is also included for the user's convenience.
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperaturesuperconductors, focusing on materials aspects; this timely bookcoincides with a recent major break-through of the discovery ofiron-based superconductors. It provides an overview of materials aspects of high-temperaturesuperconductors, combining introductory aspects, description of newphysics, material aspects, and a description of the materialproperties This title is suitable for researchers inmaterials science, physics and engineering. Also for techniciansinterested in the applications of superconductors, e.g. asbiomagnets
Download or read book Physical Properties of High Temperature Materials written by Andrew C. Victor and published by . This book was released on 1960 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Properties of High Temperature Superconductors II written by Donald M. Ginsberg and published by World Scientific. This book was released on 1990 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity.
Download or read book Physical Properties Of High Temperature Superconductors Iii written by Ginsberg Donald M and published by World Scientific. This book was released on 1992-03-03 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings the reader up to date on transport phenomena, including electrical and thermal conductivity and infrared properties. In addition, electron tunneling and the characteristics and applications of films are discussed; the preparation of the necessary samples has proceeded, and a sizeable body of reproducible data has become available. Pressure effects are also presented; considerable progress has been made in relating them to the crystallographic and electronic structure of high temperature superconductors. The preparation and characterization of bulk samples is also reviewed.
Download or read book Physical Properties of High Temperature Superconductors IV written by Donald M Ginsberg and published by World Scientific. This book was released on 1994-04-13 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains two chapters of direct interest for applications: The magnetic vortex states and transformations and the effects of c-axis coupling on the transport properties. In addition, the isotope effect is reviewed, since reliable data on ultra-pure samples are now available. The lattice vibrations (phonons) have been explored extensively by inelastic neutron scattering and infrared absorption and these types of data are reviewed as well. The interesting properties of the superconducting doped fullerenes are described; some of their most fundamental properties are shared by the superconducting cuprates. This book with its subject index, like the earlier three volumes in this series, will be found useful both by people entering the field and by workers who are already active in it. Contents:Introduction and an Overview of Some Recent Progress (D M Ginsberg)Transformations of the Vortex Solid (D E Farrell)Anistropy and Interlayer Coupling in the High Tc Cuprates (S L Cooper & K E Gray)Experimental Studies of the Isotope Effect in High Temperature Superconductors (J P Franck)Infrared-Active Vibrations of High-Temperature Superconductors: Experiment and Theory (A P Litvinchuk et al.)Inelastic Neutron Scattering Studies of the Lattice Vibrations of High Tc Compounds (L Pintschovius & W Reichardt)Superconducting Properties of Fullerenes (M S Dresselhaus et al.) Readership: Physicists, chemists, materials scientists and engineers. keywords:Superconductivity;Vortex Solids;Vortices;Isotope Effect;Infrared-Active;Fullerines;Lattice Vibrations;Progress;Transformations;Neutron Scattering
Download or read book Physical Properties of High Temperature written by D M Ginsberg and published by World Scientific. This book was released on 1990-02-01 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of Physical Properties of High Temperature Superconductors I, research in the field of high temperature superconductivity has continued at a rapid pace. Volume II will contain chapters on some of the major areas of activity which were not covered extensively in Volume I: structure, microstructure, thermodynamics, oxygen stoichiometry effects, nuclear magnetic and quadrupole resonance, Hall effect, electronic structure, and the pairing state. Like Volume I, it will present authoritative and comprehensive reviews written by recognized experts in the field. This book should be useful to all students, scientists, and engineers who desire to know more about high temperature superconductivity. Contents:Introduction: A Description of Some New Materials and An Overview of This Book (D M Ginsberg)Specific Heat of High Temperature Superconductors: A Review (A Junod)Crystal Structures of High-Temperature Superconductors (R M Hazen)The Microstructure of High-Temperature Oxide Superconductors (C H Chen)Nuclear Resonance Studies of YBa2Cu3O7-δ (C H Pennington & C P Slichter)Electronic Structure, Surface Properties, and Interface Chemistry of High Temperature Superconductors (H M Meyer III & J H Weaver)The Hall Effect and its Relation to other Transport Phenomena in the Normal State of the High-Temperature Superconductors (N P Ong)Oxygen Stoichiometric Effects and Related Atomic Substitutions in the High-Tc Cuprates (L H Greene & B G Bagley)The Paining State of YBa3Cu3O7-δ (J F Annett, N Goldenfeld & S R Renn) Readership: Physicists, chemists and engineers. Keywords:Superconductivity;Specific Heat;Crystal Structure;Microstructure;Nuclear Resonance;Surfaces;Interfaces;Hall Effect;Substitutions;Oxygen;Pairing State
Download or read book High temperature Property Data written by Michael F. Rothman and published by ASM International(OH). This book was released on 1988 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume organizes information by alloy so that pertinent data can be found easily. Physical and mechanical properties from room temperature to temperatures in excess of 100 C are shown graphically or in tabular form. All data is thoroughly referenced. Now high-temperature property data can be found in one complete reference! Over 200 alloys are organized by AISI number into 11 major sections: Irons, Carbon Steels, Alloy Steels, ASTM Steels, Low Alloy Constructional Steels, Ultra High Strength Steels, Tool Steels, Maraging Steels, Wrought Stainless Steels, Heat Resistant Casting Alloys, and Wrought Iron-Nickel Alloys and Iron-Nickel Superalloys. Each alloy record lists the designation, specifications, UNS number composition product forms and a comment on the high-temperature properties and applications. Data is then given for physical properties such as density, specific heat, thermal conductivity, thermal expansion, electrical conductivity. Poisons ratio, moduli of elasticity and rigidity, etc. Mechanical properties follow, and include tensile properties, shearing and bearing properties, impact properties, creep, stress rupture and stress relaxation, and fatigue properties.The last part of the alloy record gives other effects of temperature, such as hot hardness, corrosion, and growth.
Download or read book Materials for High Temperature Engineering Applications written by G.W. Meetham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise survey describes the requirements on materials operating in high-temperature environments and the processes that increase the temperature capability of metals, ceramics, and composites. The major part deals with the applicable materials and their specific properties, with one entire chapter devoted to coatings. Written for engineering and science students, researchers, and managers in industry.
Download or read book High Temperature Superconductors Materials Properties and Applications written by Rainer Wesche and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discovery by J. G. Bednorz and K. A. Mtllier in 1986 that the superconducting state can exist in oxides at temperatures above 30 K stimulated research in the field of superconductivity and opened up a new field of research. Within a few years a large number of cuprate superconductors with transition temperatures well above the boiling point of liquid nitrogen have been found. The possibility of using liquid nitrogen as coolant re-stimulated interest in power applications of supercon ductivity. In this book an overview of the known high-Te superconductors and their physical properties is presented. Aspects related to conductor fabrication and high-current applications are emphasised. The material should be suitable for use in graduate level courses on superconductivity. Researchers in the field may profit from the large number of tables and references describing its status at the end of 1997. An introduction to high-To superconductivity must be based on the fundamental physical principles of normal-state electrical conductivity and the well-known characteristics of conventional superconductors. In Chapter 2 this background is provided. Crystal structures, anisotropic properties and general trends of the critical temperatures of the cuprate superconductors are described in Chapters 3 and 4. The processing of superconductor powders addressed in Chapter 5 affects considerably the current-carrying capacity of high-T. wires. In Chapter 6 several fabrication techniques for superconducting wires are described. In addition, the factors limiting the transport critical currents ofhigh-Te wires are discussed.
Download or read book Physical Properties and Behaviour of High Performance Concrete at High Temperature written by Pierre Pimienta and published by Springer. This book was released on 2018-09-11 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work done by the RILEM Technical Committee 227-HPB (Physical properties and behaviour of High-Performance Concrete at high temperature). It contains the latest research results on the behaviour of high-performance concretes at high temperature. The book presents the state of the art of experimental data on High-Performance concretes and it collects and synthesizes useful data about concrete behaviour at high temperatures. The book is divided into independent chapters dealing with degradation reactions in concrete exposed to high temperatures; mass transport properties; thermal properties; and mechanical properties. The results presented especially target a group of users composed by universities and testing laboratories, building material companies and industries, material scientists and experts, building and infrastructure authorities, designers and civil engineers.
Download or read book Physical Properties of High Temperature Superconductors V written by Donald M. Ginsberg and published by World Scientific. This book was released on 1996 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The publication of Volume V of Physical Properties of High Temperature Superconductors is expected in March, 1996. It will have chapters of interest for both fundamental studies and applied research. The topics discussed are expected to include the electromagnetic response (penetration depth and surface resistance), local lattice distortions, the influence of vortex fluctuations on macroscopic behavior, the properties of superlattices, and the symmetry of the superconducting order parameter.
Download or read book Properties of High temperature Ceramics and Cermets written by Stewart M. Lang and published by . This book was released on 1960 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
