Download or read book Physical Metallurgy and processing of Intermetallic Compounds written by N.S. Stoloff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The attractive physical and mechanical properties of ordered intermetallic alloys have been recognized since early in this century. However, periodic attempts to develop intermetallics for structural applications were unsuc cessful, due in major part to the twin handicaps of inadequate low-temper ature ductility or toughness, together with poor elevated-temperature creep strength. The discovery, in 1979, by Aoki and Izumi in Japan that small additions of boron caused a dramatic improvement in the ductility of Ni3Al was a major factor in launching a new wave of fundamental and applied research on intermetallics. Another important factor was the issuance in 1984 of a National Materials Advisory Board reported entitled "Structural Uses for Ductile Ordered Alloys," which identified numerous potential defense-related applications and proposed the launching of a coordinated development program to gather engineering property and processing data. A substantial research effort on titanium aluminides was already underway at the Air Force Materials Laboratory at Wright Patterson Air Force Base in Ohio and, with Air Force support, at several industrial and university laboratories. Smaller programs also were under way at Oak Ridge National Laboratory, under Department of Energy sponsorship. These research efforts were soon augmented in the United States by funding from Department of Defense agencies such as Office of Naval Research and Air Force Office of Scientific Research, and by the National Science Foundation.
Download or read book Physical Metallurgy Processing Intermetallic Compound PB written by Stoloff; Sikka and published by . This book was released on 1997-02-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by R.W. Cahn and published by Elsevier. This book was released on 1996-02-09 with total page 2889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth edition of a work which first appeared in 1965. The first edition had approximately one thousand pages in a single volume. This latest volume has almost three thousand pages in 3 volumes which is a fair measure of the pace at which the discipline of physical metallurgy has grown in the intervening 30 years.Almost all the topics previously treated are still in evidence in this version which is approximately 50% bigger than the previous edition. All the chapters have been either totally rewritten by new authors or thoroughly revised and expanded, either by the third-edition authors alone or jointly with new co-authors. Three chapters on new topics have been added, dealing with dry corrosion, oxidation and protection of metal surfaces; the dislocation theory of the mechanical behavior of intermetallic compounds; and (most novel) a chapter on polymer science for metallurgists, which analyses the conceptual mismatch between metallurgists' and polymer scientists' way of looking at materials. Special care has been taken throughout all chapters to incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included in this edition. There is a very detailed subject index, as well as a comprehensive author index.The original version of this book has long been regarded as the standard text in physical metallurgy and this thoroughly rewritten and updated version will retain this status.
Download or read book Properties And Applications Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2009-08-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the second of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book The Physical Metallurgy of Cobalt base Superalloys written by H J Wagner and published by . This book was released on 1962 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: A detailed picture is presented of the physical and chemical phenomena that affect the behavior of cobalt-base superalloys. Solid-solution strengthening is obtained from the high-melting metallic elements molybdenum, tungsten, tantalum, and columbium. These elements also participate in precipitation reactions involving their carbides. Precipitation of intermetallic compounds such as Ni3Ti is an important process in cobalt alloys containing appreciable amounts of nickel and titanium. The relationships among microstructure, heat treatment, and mechanical properties of the important commercial alloys are considered, and whenever possible, explained on the basis of the physical and chem cal processes that occur. (Author).
Download or read book Physical Metallurgy written by Gregory N. Haidemenopoulos and published by CRC Press. This book was released on 2018-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical metallurgy is one of the main fields of metallurgical science dealing with the development of the microstructure of metals in order to achieve desirable properties required in technological applications. Physical Metallurgy: Principles and Design focuses on the processing–structure–properties triangle as it applies to metals and alloys. It introduces the fundamental principles of physical metallurgy and the design methodologies for alloys and processing. The first part of the book discusses the structure and change of structure through phase transformations. The latter part of the books deals with plastic deformation, strengthening mechanisms, and mechanical properties as they relate to structure. The book also includes a chapter on physical metallurgy of steels and concludes by discussing the computational tools, involving computational thermodynamics and kinetics, to perform alloy and process design.
Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.
Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-01-25 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume One, Process Fundamentals provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics
Download or read book Structure and Properties of Intermetallics in Pre Transitional Low Stability States written by A.I. Potekaev and published by CRC Press. This book was released on 2020-12-02 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the fundamental physical aspects of stability, the influence of structural defects on the properties and structural phase transformations of BCC alloys. The authors present patterns that occur in the structural-phase states of functional alloys with low stability or instability under thermal cycling effects. Structural-phase transformations and the physical laws governing the influence of the thermomechanical effect on the properties of alloys are examined to advance development of technological processes for processing functional materials. Features: Studies the correlation between structural phase states and changes in the physico-mechanical properties of intermetallic compounds Explores the influence of thermomechanical cycling on the properties of functional alloys Details low-stability pretransition states in alloys
Download or read book Intermetallic Matrix Composites written by Rahul Mitra and published by Elsevier. This book was released on 2017-05-25 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallic Matrix Composites: Properties and Applications is a comprehensive guide that studies the types and properties of intermetallic matrix composites, including their processing techniques, characterization and the various testing methods associated with these composites. In addition, it presents modeling techniques, their strengthening mechanisms and the important area of failure and repair. Advanced /complex IMCs are then explained, such as Self-healing IMCs and laminated intermetallic composites. The book concludes by delving into the industries that use these materials, including the automotive industry. - Reviews the latest research in intermetallic matrix composites - Contains a focus on properties and applications - Includes contributions from leading experts in the field
Download or read book Mechanical Properties of Complex Intermetallics written by Esther Belin-Ferr and published by World Scientific. This book was released on 2011 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the last one in a series of 4 books issued yearly as a deliverable of the research school established within the European Network of Excellence CMA (for Complex Metallic Alloys). It is written by reputed experts in the fields of metal physics, surface physics and chemistry, metallurgy and process engineering, combining expertise found inside as well as outside the network. The CMA network focuses on the huge group of largely unknown multinary alloys and compounds formed with crystal structures based on giant unit cells containing clusters, with many tens up to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties, which are mutually excluded in conventional materials: metallic electric conductivity combined with low thermal conductivity, combination of good light absorption with high-temperature stability, combination of high metallic hardness with reduced wetting by liquids, electrical and thermal resistance tuneable by composition variation, excellent resistance to corrosion, reduced cold-welding and adhesion, enhanced hydrogen storage capacity and light absorption, etc. The series of books will concentrate on: development of fundamental knowledge with the aim of understanding materials phenomena, technologies associated with the production, transformation and processing of knowledge-based multifunctional materials, surface engineering, support for new materials development and new knowledge-based higher performance materials for macro-scale applications.
Download or read book Treatise on Process Metallurgy written by Roderick Guthrie and published by Elsevier. This book was released on 2024-03-12 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Process Metallurgy: Volume Three, Industrial Processes provides academics with the fundamentals of the manufacturing of metallic materials, from raw materials into finished parts or products. In these fully updated volumes, coverage is expanded into four volumes, including Process Fundamentals, encompassing process fundamentals, structure and properties of matter; thermodynamic aspects of process metallurgy, and rate phenomena in process metallurgy; Processing Phenomena, encompassing interfacial phenomena in high temperature metallurgy, metallurgical process phenomena, and metallurgical process technology; Metallurgical Processes, encompassing mineral processing, aqueous processing, electrochemical material and energy processes, and iron and steel technology, non-ferrous process principles and production technologies, and more. The work distills the combined academic experience from the principal editor and the multidisciplinary four-member editorial board. Provides the entire breadth of process metallurgy in a single work Includes in-depth knowledge in all key areas of process metallurgy Approaches the topic from an interdisciplinary perspective, providing broad range coverage on topics
Download or read book Basics of Thermodynamics and Phase Transitions in Complex Intermetallics written by Esther Belin-Ferre and published by World Scientific. This book was released on 2008 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex metal alloys (CMAs) comprise a huge group of largely unknown alloys and compounds, where many phases are formed with crystal structures based on giant unit cells containing atom clusters, ranging from tens of to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties which are mutually exclusive in conventional materials, such as metallic electric conductivity combined with low thermal conductivity, good light absorption with high-temperature stability, high metallic hardness with reduced wetting by liquids, etc.This book is the first of a series of books issued yearly as a deliverable to the European Community of the School established within the European Network of Excellence CMA. Written by reputed experts in the fields of metal physics, surface physics, surface chemistry, metallurgy, and process engineering, this book brings together expertise found inside as well as outside the network to provide a comprehensive overview of the current state of knowledge in CMAs.
Download or read book Intermetallic Compounds written by J. H. Westbrook and published by Wiley-Blackwell. This book was released on 2000-07-13 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: An intermetallic compound is one consisting of two or more metallic elements present in definite proportions in alloy. They are used in a wide range of industries such as semiconductors and the aerospace industry. Thousands of tons of the nickel aluminum alloy are used worldwide every year.
Download or read book Practical Metallurgy written by George Sachs and published by . This book was released on 1940 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy Processes Technologies and Design written by Darren Wang and published by States Academic Press. This book was released on 2021-11-16 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The branch of materials science and engineering concerned with the study of metallic elements is known as metallurgy. It focuses on the chemical and physical behavior of metallic elements, their alloys and inter-metallic compounds. It studies science and technology involved in the production of metals and the engineering aspects of metal components which are used for consumer as well as manufacturing products. Metallurgy can be classified into physical and chemical metallurgy. Physical metallurgy delves into the physical and mechanical properties of metals. Material characterization, physical performance of metals, phase transformations, mechanical metallurgy and failure mechanisms are some of the focus areas of this domain. The reduction and oxidation of metals along with their chemical performance is studied under chemical metallurgy. It also focuses on metal extraction, corrosion and mineral processing. This book traces the progress of this field and highlights some of its key concepts and applications. It includes some of the vital pieces of work being conducted across the world, on various topics related to metallurgy. Students, researchers, experts and all associated with this discipline will benefit alike from this book.
