Download or read book Physical Ceramics written by Yet-Ming Chiang and published by Wiley. This book was released on 1996-05-11 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to provide students with the core understanding necessary to pursue the subject of ceramics as it now exists and to be prepared for any surprises likely to emerge. Key concepts are developed in a sequence which builds on firm foundations, using the material learned so that its significance is continuously reinforced. The nature of defects which intrudes upon the perfect geometry of ideal crystal structures, migration of matter and charge, chemical and phase equilibria are among the subjects discussed.
Download or read book Physical Ceramics for Engineers written by Lawrence H. Van Vlack and published by Addison Wesley Publishing Company. This book was released on 1964 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Microstructures written by Antoni P. Tomsia and published by Springer Science & Business Media. This book was released on 1998-04-30 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, titled Proceedings of the International Materials Symposium on Ce ramic Microstructures: Control at the Atomic Level summarizes the progress that has been achieved during the past decade in understanding and controlling microstructures in ceram ics. A particular emphasis of the symposium, and therefore of this volume, is advances in the characterization, understanding, and control of micro structures at the atomic or near-atomic level. This symposium is the fourth in a series of meetings, held every ten years, devoted to ceramic microstructures. The inaugural meeting took place in 1966, and focussed on the analysis, significance, and production of microstructure; the symposium emphasized the need for, and importance of characterization in achieving a more complete understanding of the physical and chemical characteristics of ceramics. A consensus emerged at that meeting on the critical importance of characterization in achieving a more complete understanding of ceramic properties. That point of view became widely accepted in the ensuing decade. The second meeting took place in 1976 at a time of world-wide energy shortages and thus emphasized energy-related applications of ceramics, and more specifically, microstructure-property relationships of those materials. The third meeting, held in 1986, was devoted to the role that interfaces played both during processing, and in influencing the ultimate properties of single and polyphase ceramics, and ceramic-metal systems.
Download or read book Porosity of Ceramics written by Roy W. Rice and published by CRC Press. This book was released on 1998-03-20 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on the effects of porosity and microcracking on the physical properties of ceramics, particularly nominally single phase ceramics. The book elucidates the fundamental interrelationships determining the development and use of materials for actual and potential engineering needs. It aims to help in the understanding of porosity effects on other materials, from ceramic composties, cements and plasters to rocks, metals and polymers.;College or university bookshops may order five or more copies at a special student price, available on request.
Download or read book Fundamentals of Ceramics written by Michel Barsoum and published by CRC Press. This book was released on 2002-11-27 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and improved, this revised edition of Michel Barsoum's classic text Fundamentals of Ceramics presents readers with an exceptionally clear and comprehensive introduction to ceramic science. Barsoum offers introductory coverage of ceramics, their structures, and properties, with a distinct emphasis on solid state physics and chemistry. Key equations are derived from first principles to ensure a thorough understanding of the concepts involved. The book divides naturally into two parts. Chapters 1 to 9 consider bonding in ceramics and their resultant physical structures, and the electrical, thermal, and other properties that are dependent on bonding type. The second part (Chapters 11 to 16) deals with those factors that are determined by microstructure, such as fracture and fatigue, and thermal, dielectric, magnetic, and optical properties. Linking the two sections is Chapter 10, which describes sintering, grain growth, and the development of microstructure. Fundamentals of Ceramics is ideally suited to senior undergraduate and graduate students of materials science and engineering and related subjects.
Download or read book Introduction to Ceramics written by W. David Kingery and published by John Wiley & Sons. This book was released on 1976-05-04 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2nd edition of Introduction to Ceramics has been printed 15 years after the 1st edition. Many advances have been made in understanding and controlling and developing new ceramic processes and products. this text has a considerable amount of new material and the product modification.
Download or read book Handbook of Advanced Ceramics written by and published by Academic Press. This book was released on 2013-04-11 with total page 1259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world and includes sections on Basic Science of Advanced Ceramics, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics. - Contributions from more than 50 leading researchers from around the world - Covers basic science of advanced ceramics, functional ceramics (electro-ceramics and optoelectro-ceramics), and engineering ceramics - Approximately 750 illustrations
Download or read book Structural Ceramics written by F. L. Riley and published by Cambridge University Press. This book was released on 2009-05-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews production methods, microstructures, and properties of structural ceramics with important applications, including high voltage insulators, hot gas filters, machining tools, and hip joint replacements.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
Download or read book Surface Design for Ceramics written by Maureen Mills and published by Sterling Publishing Company, Inc.. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This studio reference captures all the popular techniques available for embellishing clay, as well as a wealth of practical information and detailed images that lead readers through every phase of the design and decorating process.
Download or read book Nanocrystalline Ceramics written by Markus Winterer and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystalline materials are three-dimensional ultrafine, polycrystalline microstructures. They give rise to interesting and useful chemical and physical-size effects. This book describes the development of a method of synthesizing chemical vapor for the production of nanocrystalline ceramic powders. The development of the microstructure during sintering is studied and the influence of the synthesis parameters on the structure and properties of the nanocrystalline ceramics from the atomic to the microstructural level is investigated. The emerging unified view, from powder synthesis and ceramic processing to structural characterization and determination of properties, provides a detailed understanding of the materials and enables better quality control of the end products.
Download or read book Fundamentals of Ceramics written by Michel Barsoum and published by CRC Press. This book was released on 2019-12-12 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Ceramics presents readers with an exceptionally clear and comprehensive introduction to ceramic science. This Second Edition updates problems and adds more worked examples, as well as adding new chapter sections on Computational Materials Science and Case Studies. The Computational Materials Science sections describe how today density functional theory and molecular dynamics calculations can shed valuable light on properties, especially ones that are not easy to measure or visualize otherwise such as surface energies, elastic constants, point defect energies, phonon modes, etc. The Case Studies sections focus more on applications, such as solid oxide fuel cells, optical fibers, alumina forming materials, ultra-strong and thin glasses, glass-ceramics, strong and tough ceramics, fiber-reinforced ceramic matrix composites, thermal barrier coatings, the space shuttle tiles, electrochemical impedance spectroscopy, two-dimensional solids, field-assisted and microwave sintering, colossal magnetoresistance, among others.
Download or read book Introduction to Ceramics written by Sujoy Bose and published by CRC Press. This book was released on 2024-06-04 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of ceramics has applications in diverse fields including electronic engineering, electrical engineering, biochemical engineering, automobile engineering and defense sector. This textbook discusses ceramic raw materials, properties of ceramics, fabrication techniques of ceramics and testing of ceramics. It comprehensively discusses mechanical properties, thermal properties, optical properties, electrical properties and magnetic properties of ceramics. The text covers structural characteristics, properties and applications of advanced ceramic materials and examines their difference from the conventional ceramics. A separate chapter discusses testing methods of ceramics including testing of raw materials, testing of physical properties, testing of mechanical strength and testing of electrical properties in dept. This textbook begins by discussing ceramic raw materials, proceeds with conventional ceramics, continues with properties and fabrication techniques of ceramic materials, testing of ceramics and ends with covering advanced ceramics. This book features: Covers ceramics from traditional to advanced Discusses fabrication, characterization and applications of ceramics in detail Examines mechanical properties, thermal properties, optical properties, electrical properties and magnetic properties of ceramics in detail Covers structural characteristics, properties and applications of carbides, nitrides, oxides and borides Discusses processing techniques including mechanical separation and magnetic separation of ceramics It will help serve as ideal study material for senior undergraduate and graduate students in the field of chemical engineering, materials science and engineering, and ceramic technology.
Download or read book Mechanical and Thermal Properties of Ceramics written by J. B. Wachtman and published by . This book was released on 1969 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamental Biomaterials Ceramics written by Sabu Thomas and published by Woodhead Publishing. This book was released on 2018-02-16 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental Biomaterials: Ceramics provides current information on ceramics and their conversion from base materials to medical devices. Initial chapters review biomedical applications and types of ceramics, with subsequent sections focusing on the properties of ceramics, and on corrosion, degradation and wear of ceramic biomaterials. The book is ideal for researchers and professionals in the development stages of design, but is also helpful to medical researchers who need to understand and communicate the requirements of a biomaterial for a specific application. This title is the second in a three volume set, with each reviewing the most important and commonly used classes of biomaterials and providing comprehensive information on material properties, behavior, biocompatibility and applications. In addition, with the recent introduction of a number of interdisciplinary bio-related undergraduate and graduate programs, this book will be an appropriate reference volume for large number of students at undergraduate and post graduate levels - Provides current information on findings and developments of ceramics and their conversion from base materials to medical devices - Includes analyses of the types of ceramics and a discussion of a range of biomedical applications and essential properties, including information on corrosion, degradation and wear, and lifetime prediction of ceramic biomaterials - Explores both theoretical and practical aspects of ceramics in biomaterials
Download or read book Advanced Ceramics for Dentistry written by James Shen and published by Butterworth-Heinemann. This book was released on 2013-09-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of implant and fixed prosthodontics practices in dentistry has created a rapidly increasing demand for advanced ceramics and ceramic processes. Innovations in ceramics and ceramic processes are vital to ensure reliable and affordable dental-restoration solutions with aesthetically pleasing outcomes. The work aims to engage the bioceramics and engineering communities to meet the challenges of modern dental restoration using advanced ceramics. Incorporating fundamental science, advanced engineering concepts, and clinical outcomes, the work is suitable for bioceramicists, ceramics manufacturers, dental clinicians and biologists. - State-of-the-art-coverage encompasses bioresorbable ceramics for bone regeneration and bioactivating surfaces of inert, high-strength ceramics for implantation, keeping research knowledge appropriately updated - Discusses transition from the baseline stable and physically stiff ceramics research into engineering of highly coherent laminate composites for prosthetic crowns and bridges - Showcases current feasible techniques for producing, in cost-effective and materials-saving ways, long-lasting individualized ceramic components with biocompatibility, complexity and high precision
Download or read book Thin Section Petrography Geochemistry and Scanning Electron Microscopy of Archaeological Ceramics written by Patrick Sean Quinn and published by Archaeopress Publishing. This book was released on 2022-08-31 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin section petrography, geochemistry, scanning electron microscopy and X-ray diffraction are key scientific methods used to investigate the raw materials, origins and production technology of archaeological pottery, ceramic building materials, ancient refractories and plaster. Using over 400 colour figures of a diverse range of artefact types and archaeological periods from 50 countries worldwide, this book outlines the mineralogical, chemical and microstructural composition of ancient ceramics and provides comprehensive guidelines for their scientific study within archaeology. The core of the book is dedicated to the versatile approach of ceramic petrography. This is complimented by a detailed account of the principles of bulk instrumental geochemistry, as well as the SEM microanalysis and XRD characterisation of ceramics. The book is intended as a reference manual for research as well as a course text for specialist training on scientific ceramic analysis.
