Download or read book Phosphoric Acid Activation and Microwave induced Activated Carbon Prepared from Palm Kernel Shell written by Noramirah Wahab and published by . This book was released on 2011 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book To Produce the Activated Carbon from Matured Palm Kernel Shell written by Zarifah Nadiah Mohamad Salleh and published by . This book was released on 2010 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this experiment were to prepare the activated carbon from matured palm kernel shell as a raw material by carbonization and the studied which optimum variables such as temperature, concentration of phosphoric acid and cooling down time are suitable. Activated carbon is a form of carbon that has been processed to make extremely porous and have very large surface area for adsorption and chemical reactions. The matured palm kernel shell is carbonized in a glass furnace at elevation temperature after soaked with H3PO4 acid and cooled down the carbonized activated carbon. Methyl orange are used as an indicator to test the carbonized raw material whether it is activated carbon or common charcoal. The real activated carbon would change the orange solution to a clear solution and the solution of different color is analyzed by using FTIR to check the functional group of methyl orange. The result showed that 1000oC is the optimum temperature to carbonize the raw material and the use of 0.35M 3PO acid with the cooling down time at 30 minutes would give the best adsorption of activated carbon after filtration. From the data obtained by FTIR, the 0.35M H43PO acid has showed that the peak functional group of methyl orange is reduced from first filtration till last filtration. It is recommend that the raw material not to be crushed small than 0.2 mm, because it will effect the adsorption and filtration rate. As a conclusion, The activated carbon has been produced from matured palm kernel shell using glass furnace and The optimum effect of variables have been determined by observation and analysis of FTIR, it is at 100004 C of temperature, by impregnated in 0.35M of Phosphoric acid and cool the activated carbon down in 30 minutes are found to be the optimum variables in producing the activated carbon.
Download or read book Review of the Activated Carbon Industry and Scope for Oil Palm Kernel Shell as a Raw Material written by P. Reupke and published by Hyperion Books. This book was released on 1992 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the different raw materials, types and applications of activated carbon, plus the processes involved in the production of various carbons. The scope for the use of oil palm kernel shell as a potential feedstock for activation is considered in detail.
Download or read book Activated Carbon from Palm Kernel Shell as an Adsorbent of Paraquat written by Mohosina Bintay Shahjahan and published by . This book was released on 2013 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly Efficient Activated Carbon (HEAC) as an adsorbent of toxins has been successfully produced from palm shell through chemical activation process using phosphoric acid as an activating agent. Palm Kernel shell used as the main raw material for activated carbon production, was purchased from a local oil palm mill in Pahang, Malaysia. Temperature range 550 oC - 650 oC was used during the activation process. The effect of temperature variation on the pore size and surface morphology of the activated carbon were studied. Well developed pore size and low number of functional groups observed on activated carbon at 600 oC were determined by Scanning Electron Microscope (SEM) and Fourier- Transform Infrared (FTIR) spectroscopy, respectively. The surface area and pore volume were determined by Brunauer, Emmett and Teller (BET) method using N2 gas adsorption. The highest surface area (1287 m2g-1) and pore volume (0.74 cm3 g-1) was observed with sample HEAC-2. The adsorption efficiency of HEAC-2 was studied in vitro for paraquat as toxin using distilled water and NaCl (0.9%) solution. These study shows paraquat was adsorbed more on HEAC-2 in the presence of sodium chloride solution (4.68 mgL-1) than in distilled water (3.62 mgL-1). Furthermore, a comparision was done between HEAC-2 (4.68 mgL-1) and commercially available activated carbon (4.18mg L-1) which proved HEAC-2 is more effective than commercially available activated carbon.
Download or read book Oil Palm Shell written by Mohammad Abdul Mannan and published by Nova Science Publishers. This book was released on 2017 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Author Biography: Dr. Mohammad Abdul Mannan was born at a simple family of a small village, Aktarpur, Rangiarpota, Jibonnagar, Chuadanga, Bangladesh. He has obtained B.Sc. (Civil Engineering) degree with first class, MSc in Civil Engineering and PhD in Concrete technology. He has started carrier as lecturer at BIT Rajshahi (now RUET), Bangladesh followed by AJP consulting firm, then Universiti Malaysia Sabah (UMS) and is now a Professor of Department of Civil Engineering, Universiti Malaysia Sarawak, Malaysia. He is the inventor of few construction products. Based on 30 years of experience in teaching, professional practice and research, his vision is to be excellence in research on Innovative Construction Material and Structure. Book Description: Due to a high demand in construction and furniture industries worldwide, natural resources such as stones and wood as non-renewable resources are being depleted. Thus, researchers are focusing on renewable resources as alternative materials. As such, the utilisation of abundant solid wastes and byproducts, which are discharged from agriculture, industry and municipalities present an alternative to the conventional materials for the construction and furniture industries. These solid wastes and byproducts, when properly processed have shown to be effective and can readily meet design specifications. Agricultural solid wastes from oil palm distributors such as Oil Palm Shell (OPS) and Empty Fruit Bunch (EFB), which are abundant in agro-based countries, present an interesting alternative to the conventional aggregate in lightweight concrete and artificial plank production, respectively. At present, palm oil producing countries are Barkina Faso, Benin, Burundi, Cameroon, Central African Republic, Colombia, Costa Rica, C�te d'Ivoire, Democratic Republic of Congo, Ecuador, Equatorial Guinea, Gabon, Gambia, Ghana, Guinea Bissau, Guinea, Honduras, India, Indonesia, Liberia, Malaysia, Mexico, Nigeria, Papua New Guinea, Peru, Republic of Congo, Senegal, Sierra Leone, Tanzania, Thailand, Togo, Uganda, Venezuela and others. In Malaysia, oil palm plantations cover over 5 million hectares, and annual production of OPS as solid waste from 450 oil palm mills is more than 6 million tons. This large amount of OPS as a renewable green aggregate can contribute to overcoming the over dependence on depletable resources for concrete production. The civil engineering projects are of a larger scale; they need sustainable materials in order to gain a greater momentum of growth. The major technical characteristics of OPS solid waste must be primarily understood before each particular use. Therefore, there is a need to highlight the importance of OPS to be used in the construction industry.
Download or read book Synthesis Technology and Applications of Carbon Nanomaterials written by Suraya Abdul Rashid and published by Elsevier. This book was released on 2018-10-10 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Technology and Applications of Carbon Nanomaterials explores the chemical properties of different classes of carbon nanomaterials and their major applications. As carbon nanomaterials are used for a variety of applications due to their versatile properties and characteristics, this book discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials. It is an essential resource for readers focusing on carbon nanomaterials research. - Explores the chemical properties of different classes of carbon nanomaterials and their major applications - Discusses recent advances in synthesis methods, characterization, and applications of 0D -3D dimensional carbon nanomaterials
Download or read book Preparation and Characterization of Activated Carbon from Palm Kernel Shell by Using Carbon Dioxide Activation for Dichlorodifluoromethane CCI2F2 Adsorption written by Farah Hanim Md. Isa and published by . This book was released on 2008 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lignocellulosic Precursors Used in the Synthesis of Activated Carbon written by Virginia Hernández Montoya and published by BoD – Books on Demand. This book was released on 2012-02-29 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book discusses the principal lignocellulosic precursors used in the elaboration of activated carbons in different countries such as Asia, America, Europe and Africa; the different methods and experimental conditions employed in the synthesis of activated carbons, including one analysis of the principal stages of the preparation such as carbonization and activation (i.e., chemical or physical activation). Also, the recent and more specialized techniques used in the characterization of activated carbons are discussed in this book. For example, the techniques employed to determine textural parameters (mercury porosimetry and gas adsorption isotherms at 77 K) and different spectroscopies to determine chemical functionality (Raman, FT-IR, etc.) and other X-Ray techniques. Additionally, an overview of the application of activated carbons obtained from lignocellulosic precursors for wastewater treatment. Specifically, the analysis and discussion are focused on the advantages and capabilities of activated carbons for the removal of relevant toxic compounds and pollutants from water such as heavy metals, dyes, phenol, etc. Finally, the use of pyrolysis method for the valorization of two Mexican typical agricultural wastes (orange peel and pecan nut shell) for energy and carbon production is considered in this book.
Download or read book Physicochemical Characterization of Activated Carbons Prepared from Oil Palm Shell by Phosphoric Acid Activation written by Ker Lee Ong and published by . This book was released on 2008 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Activated Carbon from Palm Kernel Shell by Using Chemical Activation written by Muhammad Adzim Mazelan and published by . This book was released on 2016 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Technologies for the Management of Agricultural Wastes written by Zainul Akmar Zakaria and published by Springer. This book was released on 2017-12-21 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses modern technologies for utilizing various types of agricultural waste as a direct means of properly managing its abundance. It explores the potential of using waste materials obtained from the palm oil industry, used cooking oil, maize and tea plantations, as well as citrus-based plants for the production of useful, high-value materials such as pyroligenous acid and bio-oil (Chapter 1), ferulic acid (Chapter 4) and bio-control agents (Chapter 5-7, 9). It also includes case studies to further enhance readers’ understanding. This comprehensive volume is useful to anyone involved in agricultural waste management, green chemistry and agricultural biotechnology. It is also recommended as a reference work for all agriculture and biotechnology libraries.
Download or read book Carbon based Composites and Nanocomposites written by Jeyaseelan Aravind and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-08-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the dynamic world of carbon-based composites and nanocomposites, where innovation intersects with environmental consciousness. This expansive volume delves into the multifaceted role of carbon composites in combating pollution, from the versatility of activated carbon in adsorbing emerging contaminants to the strategic application of carbon-polymer composites for environmental challenges. Discover the effectiveness of activated carbon in adsorbing emerging contaminants and the strategic use of carbon-polymer composites in addressing environmental challenges. Gain insights into the transformative potential of biochar and the synergistic interplay of carbon and metal nanoparticle composites, carbon nanotubes, and nano-fibers in water purification and sustainable environmental applications.
Download or read book Energy Technology 2013 written by Soobhankar Pati and published by John Wiley & Sons. This book was released on 2013-01-23 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features a collection of papers on the issues, intricacies, and challenges relating to energy and environmental science. It offers expert coverage of the various technological aspects of sustainable energy ecosystems, including processes that improve energy efficiency and reduce CO2 and other greenhouse emissions. It also addresses the need for sustainable technologies in extractive metallurgy, materials processing, and manufacturing industries with energy efficient technologies. Some additional contributions examine renewable energy sources such as solar, wind, and biomass.
Download or read book From Biomass to Biobased Products written by Eduardo Jacob-Lopes and published by BoD – Books on Demand. This book was released on 2024-06-12 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Realizing the finite nature of natural resources such as fossil fuels, the emphasis is now shifting to alternative raw materials with the potential to mitigate the environmental, economic, and social stresses of today’s world. Under this horizon, in this book, we explore the use of biomass and key issues, including technological nodes and disruptive technologies capable of unlocking the black box of biomass-based technology. This book provides an overview for those attentive to the promises of biomass as a source of a myriad of specialty products.
Download or read book Biomass and Bioenergy written by Khalid Rehman Hakeem and published by Springer. This book was released on 2014-08-25 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass obtained from agricultural residues or forest can be used to produce different materials and bioenergy required in a modern society. As compared to other resources available, biomass is one of the most common and widespread resources in the world. Thus, biomass has the potential to provide a renewable energy source, both locally and across large areas of the world. It is estimated that the total investment in the biomass sector between 2008 and 2021 will reach the large sum of $104 billion. Presently bioenergy is the most important renewable energy option and will remain so the near and medium-term future. Previously several countries try to explore the utilization of biomass in bioenergy and composite sector. Biomass has the potential to become the world’s largest and most sustainable energy source and will be very much in demand. Bioenergy is based on resources that can be utilized on a sustainable basis all around the world and can thus serve as an effective option for the provision of energy services. In addition, the benefits accrued go beyond energy provision, creating unique opportunities for regional development. The present book will provide an up-to-date account of non-wood, forest residues, agricultural biomass (natural fibers), and energy crops together with processing, properties and its applications to ensure biomass utilization and reuse. All aspects of biomass and bioenergy and their properties and applications will be critically re-examined. The book consists of three sections, presenting Non wood and forest products from forestry, arboriculture activities or from wood processing, agricultural biomass (natural fibers) from agricultural harvesting or processing and finally energy crops: high yield crops and grasses grown especially for energy production.
Download or read book Adsorption Technology written by Frank L. Slejko and published by CRC Press. This book was released on 1985-03-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the non-specialist involved with evaluating adsorption technology for specific applications, Adsorption Technology provides a timely, hands-on source of step-by-step fundamentals required to meet the needs of all types of adsorption situations. Presenting theoretical and practical information adaptable to granular activated carbon as well as synthetic adsorbents, this illustrated, easy-to-use guide offers convenient access to: principles of adsorption theory, isotherms, and the physical basis for mathematical models ... understanding of laboratory experiments needed to screen adsorbents for new applications ... procedures for testing and evaluating adsorbents in pilot plant studies ... methods for developing conceptual flowsheets for subsequent engineering cost estimating ... and more. With this important reference, industrial process, chemical, and environmental engineers and chemists now have a dependable single source to turn to for a solid, working understanding of applied adsorption technology. Moreover, this volume is an ideal text for graduate-level courses in chemical and environmental engineering, as well as continuing education courses and professional seminars. Book jacket.
Download or read book Effluent Dye Removal by Microwave Assisted Activated Carbon written by Rehab Abdelghaffar and published by Springer Nature. This book was released on 2023-10-13 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the potential of advanced microwave techniques, specifically microwave-assisted pyrolysis, for the production, adsorption, and regeneration of activated carbon (AC) as a promising solution to address wastewater pollution caused by dyes. The author begins with a chapter devoted to the environmental implications of water pollution and emphasizes the characteristics of dyes and various treatment techniques for their removal. The advantages and disadvantages of commercially available activated carbon are also discussed, along with the determinants for effective adsorption using high-quality activated carbon. Additionally, the chapter delves into the different types of adsorbents, including agricultural and industrial waste, as well as bioadsorbents such as microorganisms. In Chapter 2, readers will find the latest trends in using microwave techniques for the activation process. In this chapter, the author elucidates the characteristics and mechanism of microwave heating and compares it with conventional heating methods. The advantages of microwave techniques, such as improved activation procedures and the influence of different factors, are explored. Various modeling and optimization approaches for adsorption and different techniques for analyzing the surface chemistry of activated carbons are also discussed. Furthermore, the chapter showcases the applications of microwave-assisted activated carbon for dye removal. The book closes with a chapter devoted to the recycling and regeneration of spent activated carbon (SAC) using microwave techniques. In this chapter, the author examines the procedures for SAC regeneration through microwave-assisted pyrolysis and highlights the advantages over conventional heating methods. The applications of microwave-assisted activated carbon regeneration and other miscellaneous technologies utilizing microwave heating for AC production and SAC regeneration are also explored. Given its breadth, this book is a valuable resource for researchers, professionals, and policymakers in the field of environmental science and engineering.
