Download or read book Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi static Three point Bending written by Jonathan Chun-Yiu Tham and published by . This book was released on 2018 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: A phenomenological model is implemented to model the behaviour of a glass fiber reinforced sheet moulding composite material. Previous characterization of SMC composites, which included the tensile, compressive, in-plane shear and three-point flexure test, found that the material exhibits tension-compression asymmetry and in-plane anisotropy. Based on the experimental results, a model, which incorporates an anisotropic and asymmetric yield function, is implemented in LS-DYNA as a user-defined material model. The model is calibrated to the experimental tension, compression and in-plane shear test results and is validated using the experimental three-point flexure test results. The model is able to capture the flexure stress-strain response within 8% of experimental results. Parametric studies are conducted to determine the sensitivity of the flexure test simulation results to various modeling and material parameters.
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. State of the art analysis of impact response, damage tolerance and failure of FRC materials Distinguished contributors provide expert analysis of the most recent materials and structures Valuable tool for R&D engineers, materials scientists and designers
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-10 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structu
Download or read book Hybrid Natural Fiber Composites written by Anish Khan and published by Woodhead Publishing. This book was released on 2021-01-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on natural fiber composites is an emerging area in the field of polymer science with tremendous growth potential for commercialization. Hybrid Natural Fiber Composites: Material Formulations, Processing, Characterization, Properties, and Engineering Applications provides updated information on all the important classes of natural fibers and their composites that can be used for a broad range of engineering applications. Leading researchers from industry, academia, government, and private research institutions from across the globe have contributed to this highly application-oriented book. The chapters showcase cutting-edge research discussing the current status, key trends, future directions, and opportunities. Focusing on the current state of the art, the authors aim to demonstrate the future potential of these materials in a broad range of demanding engineering applications. This book will act as a one-stop reference resource for academic and industrial researchers working in R&D departments involved in designing composite materials for semi structural engineering applications. Presents comprehensive information on the properties of hybrid natural fiber composites that demonstrate their ability to improve the hydrophobic nature of natural fiber composites Reviews recent developments in the research and development of hybrid natural fiber composites in various engineering applications Focuses on modern technologies and illustrates how hybrid natural fiber composites can be used as alternatives in structural components subjected to severe conditions
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Textile Reinforced Cement Composites written by Jan Wastiels and published by MDPI. This book was released on 2020-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre-reinforced concrete materials by their strain-hardening behaviour under tensile loading. This Special Issue is composed of 14 papers covering new insights in structural and material engineering. The papers include investigations on the level of the fibre reinforcement system as well as on the level of the composites, investigating their impact and fatigue behaviour, durability and fire behaviour. Both the strengthening of existing structures and the development of new structural systems such as lightweight sandwich systems are presented, and analysis and design methods are discussed. This Special Issue demonstrates the broadness and intensity of the ongoing advancements in the field of Textile-Reinforced Cement composites and the importance of several future research directions.
Download or read book Short Fiber Reinforced Composite Materials written by B. Sanders and published by ASTM International. This book was released on 1982 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiscale Modeling and Simulation of Composite Materials and Structures written by Young Kwon and published by Springer Science & Business Media. This book was released on 2007-12-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in multiscale modeling and simulation techniques for composite materials and structures. It focuses on the structural and functional properties of engineering composites and the sustainable high performance of components and structures. The multiscale techniques can be also applied to nanocomposites which are important application areas in nanotechnology. There are few books available on this topic.
Download or read book Fiber reinforced Composites written by P. K. Mallick and published by . This book was released on 1988 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Engineering of Short Fibre Reinforced Polymer Composites written by Shao-yun Fu and published by Woodhead Publishing. This book was released on 2019-08-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Short Fibre Reinforced Polymer Composites, Second Edition, provides the latest information on the ‘short fiber reinforced composites' (SFRP) that have found extensive applications in automobiles, business machines, durable consumer items, sporting goods and electrical industries due to their low cost, easy processing and superior mechanical properties over parent polymers. This updated edition presents new developments in this field of research and includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, and both modern computational and process engineering methods. Reviews the mechanical properties and functions of short fiber reinforced polymer composites (SFRP) Examines recent developments in the fundamental mechanisms of SFRP's Assesses major factors affecting mechanical performance, such as stress transfer and strength Includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, modern computational methods, and process engineering methods
Download or read book Mechanics of Composite Materials and Structures written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compact presentation of the foundations, current state of the art, recent developments and research directions of all essential techniques related to the mechanics of composite materials and structures. Special emphasis is placed on classic and recently developed theories of composite laminated beams, plates and shells, micromechanics, impact and damage analysis, mechanics of textile structural composites, high strain rate testing and non-destructive testing of composite materials and structures. Topics of growing importance are addressed, such as: numerical methods and optimisation, identification and damage monitoring. The latest results are presented on the art of modelling smart composites, optimal design with advanced materials, and industrial applications. Each section of the book is written by internationally recognised experts who have dedicated most of their research work to a particular field. Readership: Postgraduate students, researchers and engineers in the field of composites. Undergraduate students will benefit from the treatment of the foundations of the mechanics of composite materials and structures.
Download or read book Composites and Their Properties written by Ning Hu and published by BoD – Books on Demand. This book was released on 2012-08-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites are a class of material, which receives much attention not only because it is on the cutting edge of active material research fields due to appearance of many new types of composites, e.g., nanocomposites and bio-medical composites, but also because there are a great deal of promises for their potential applications in various industries ranging from aerospace to construction due to their various outstanding properties. This book mainly deals with fabrication and property characterization of various composites by focusing on the following topics: functional and structural nanocomposites, numerical and theoretical modelling of various damages in long fiber reinforced composites and textile composites, design, processing and manufacturing technologies and their effects on mechanical properties of composites, characterization of mechanical and physical properties of various composites, and metal and ceramic matrix composites. This book has been divided into five sections to cover the above contents.
Download or read book Mechanics of Pneumatic Tires written by Samuel K. Clark and published by . This book was released on 1981 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
