Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1985 with total page 1346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Superconductivity Metallurgy and Physics of Titanium Alloys written by E.W. Collings and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scope and Purpose Although conductors based on the Al5 intermetallic compound Nb Sn 3 possess desirable high-field superconducting properties, manufacturing and handling difficulties, coupled with the tendency of their critical current densities to degrade rapidly under stress, have generally restricted their use to fairly straightforward, usually small-scale solenoidal-magnet applica tions. Likewise the Al5 compound VGa, which has a wider critical strain 3 window than NbSn but a uniformly lower upper critical field, has not 3 entered widespread service. Strain has been found to have no measurable influence on either the critical fields or the critical current densities of compound superconductors with BI and Cl5 crystal structures, but as yet they are still in the research and development stages. On the other hand, conductors using the binary alloy Ti-Nb or multi component alloys based on it, because of their relative ease of manufacture, excellent mechanical properties, and relatively low strain sensitivities, are now being pressed into service in numerous large-scale devices. Such conductors are being wound into magnets for use in energy storage, energy conversion (i. e. , generators and motors), and high-energy particle detectors and beam-handling magnets. of cold-rolled or drawn Ti-Nb-alloy wire for superconducting The use magnet applications was first proposed in 1961. During the ensuing ten years, while progress was being made in the development of Cu-clad filamentary-Ti-Nb-alloy conductors, Ti-Nb and other Ti-base binary transi tion-metal (TM) alloys were being employed as model systems in the fundamental study of type-II superconductivity.
Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Advances in Manufacturing Technologies and Production Engineering written by Ilesanmi Afolabi Daniyan and published by Bentham Science Publishers. This book was released on 2022-01-06 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents a collection of studies which highlight new developments in improving manufacturing processes and performance. The book includes 11 chapters which cover unique topics of interest to production engineers. These topics include the production of advanced composite materials and alloys to the use of sensors to evaluate production processes, product testing and evaluation (in production and storage environments), and the development and testing of an unmanned aerial vehicle. Chapters have been contributed by several scholars, who give a unique perspective on specific aspects of manufacturing and industrial production. The book also covers recent technologies such as additive manufacturing. Each chapter presents the study in an experimental manner highlighting the theory, methods, and results, where applicable. References for further reading are also provided. This book is intended to provide researchers and engineers with new data and cases for industrial manufacturing processes which may be applied in different industrial sectors.
Download or read book Reactor Core Materials written by and published by . This book was released on 1964 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by James Case Williams and published by . This book was released on 1982 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallic Biomaterials for Medical Applications written by Liqiang Wang and published by Frontiers Media SA. This book was released on 2022-01-17 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Application of Biomedical Titanium Alloys written by Liqiang Wang and published by Bentham Science Publishers. This book was released on 2018-04-05 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium and its alloys have been widely used as biomedical implant materials due to their low density, good mechanical properties, superior corrosion resistance and biocompatibility when compared with other metallic biomaterials such as Co–Cr alloys and stainless steels. Recently, β-type titanium alloys have been increasingly considered as excellent implant materials because of the remarkable combination of high strength-to-weight ratio, good fatigue resistance, relatively low Young's modulus, good biocompatibility and high corrosion resistance relative to conventional titanium biomaterials. This book covers recent information about biomedical titanium alloy development and 3D printing. Chapters describe the processing, microstructure, mechanical properties and corrosion properties in detail. Information about the surface modification of titanium alloys for biomedical applications, and manufacturing of titanium alloys by new technologies (such as selective laser melting and electron beam melting), is also presented. Readers will learn about the various types of biomedical titanium alloys, their advantages and disadvantages, their fabrication methods and medical applications. This book is a useful handbook for biomedical engineers, metallurgists and biotechnicians seeking information about titanium-based alloys for biomaterials research and development.
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
Download or read book Welding written by Sadek Alfaro and published by BoD – Books on Demand. This book was released on 2021-01-14 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The welding process is used by manufacturing companies worldwide. Due to this broad application, many studies have been carried out in various fields to improve the quality and reduce the cost of welded components and structures. Welding is a complex and non-linear physical and mechanistic process. This book relates the importance of automation and control in welding processes, highlights some modern processes, and shows, among other influential welding factors, the importance of metal thermomechanical processing studies.
Download or read book Joining of Titanium written by Robert Edward Monroe and published by . This book was released on 1967 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report supplies information on joining processes applicable to titanium and its alloys in sheet metal applications, primarily related directly to airframe construction. Although the material presented here does not cover all titanium joining processes, and omits such processes as plasma-arc, submerged-arc, electroslag, flash, and high-frequency resistance welding, the data presented cover materials up to 2-inches thick in some cases and the report should be useful to anyone seeking titanium joining information. The joining processes covered fall into five categories: welding, brazing, metallurgical bonding (diffusion and deformation bonding), adhesive bonding, and mechanical fastening. The fusion welding processes that are discussed in detail include gas tungsten arc, gas metal arc, arc spot, and electron beam. The resistance processes give extended coverage are spot, roll spot, and seam welding. (Author).
Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point