Download or read book Phase Noise in Signal Sources written by W. P. Robins and published by IET. This book was released on 1984 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a thorough treatment of phase noise, its relationship to thermal noise and associated subjects such as frequency stability. The design of low phase noise signal sources, including oscillators and synthesisers, is explained and in many cases the measured phase noise characteristics are compared with the theoretical predictions. Full theoretical treatments are combined with physical explanations, helpful comments, examples of manufactured equipment and practical tips. Overall system performance degradations due to unwanted phase noise are fully analysed for radar systems and for both analogue and digital communications systems. Specifications for the acceptable phase noise performance of signal sources to be used in such systems are derived after allowing for both technical and economic optimisation. The mature engineer whose mathematics may be somewhat rusty will find that every effort has been made to use the lowest level of mathematical sophistication that is compatible with a full analysis and every line of each mathematical argument has been set out so that the book may be read and understood even in an armchair. Due to a novel approach to the analytical treatment of narrow band noise, the book is simple to understand while simultaneously carrying the analysis further in several areas than any existing publication.
Download or read book Phase noise in signal sources theorie and applications written by W. P. Robins and published by . This book was released on 1982 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Noise in Signal Sources written by W. P. Robins and published by . This book was released on 1982 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Jitter and Phase Noise written by Nicola Da Dalt and published by Cambridge University Press. This book was released on 2018-02-22 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain an intuitive understanding of jitter and phase noise with this authoritative guide. Leading researchers provide expert insights on a wide range of topics, from general theory and the effects of jitter on circuits and systems, to key statistical properties and numerical techniques. Using the tools provided in this book, you will learn how and when jitter and phase noise occur, their relationship with one another, how they can degrade circuit performance, and how to mitigate their effects - all in the context of the most recent research in the field. Examine the impact of jitter in key application areas, including digital circuits and systems, data converters, wirelines, and wireless systems, and learn how to simulate it using the accompanying Matlab code. Supported by additional examples and exercises online, this is a one-stop guide for graduate students and practicing engineers interested in improving the performance of modern electronic circuits and systems.
Download or read book Radio Frequency Integrated Circuits and Systems written by Hooman Darabi and published by Cambridge University Press. This book was released on 2020-03-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded new edition equips students with a thorough understanding of the state-of-the-art in radio frequency (RF) design and the practical knowledge and skills needed in industry. Introductory and advanced topics are covered in-depth, with clear step-by-step explanations, including core topics such as RF components, signals and systems, two-ports, noise, distortion, low-noise amplifiers, power amplifiers, and transceiver architectures. New material has been added on wave propagation, skin effect, antennas, mixers and oscillators, and digital PAs and transmitters. Two new chapters detail the analysis and design of RF and IF filters (including SAW and FBAR duplexers and N-path filters), phase-locked loops, frequency synthesizers, digital PLLs, and frequency dividers. Theory is linked to practice through real-world applications, practical design examples, and exploration of the pros and cons of various topologies. Over 250 homework problems are included, with solutions and lecture slides for instructors available online. With its uniquely practical and intuitive approach, this is an essential text for graduate courses on RFICs and a useful reference for practicing engineers.
Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book on Analog Circuit Design contains the revised contributions of all the tutorial speakers of the eight workshop AACD (Advances in Analog Circuit Design), which was held at Nice, France on March 23-25, 1999. The workshop was organized by Yves Leduc of TI Nice, France. The program committee consisted of Willy Sansen, K.U.Leuven, Belgium, Han Huijsing, T.U.Delft, The Netherlands and Rudy van de Plassche, T.U.Eindhoven, The Netherlands. The aim of these AACD workshops is to bring together a restricted group of about 100 people who are personally advancing the frontiers of analog circuit design to brainstorm on new possibilities and future developments in a restricted number of fields. They are concentrated around three topics. In each topic six speakers give a tutorial presentation. Eighteen papers are thus included in this book. The topics of 1999 are: (X)DSL and other communication systems RF MOST models Integrated filters and oscillators The other topics, which have been coverd before, are: 1992 Operational amplifiers A-D Converters Analog CAD 1993 Mixed-mode A+D design Sensor interfaces Communication circuits 1994 Low-power low-voltage design Integrated filters Smart power 1995 Low-noise low-power low-voltge design Mixed-mode design with CAD tools Voltage, current and time references vii viii 1996 RF CMOS circuit design Bandpass sigma-delta and other data converters Translinear circuits 1997 RF A-D Converters Sensor and actuator interfaces Low-noise oscillators, PLL's and synthesizers 1998 I-Volt electronics Design and implementation of mixed-mode systems Low-noise amplifiers and RF power amplifiers for telecommunications
Download or read book MIMO Systems written by Hossein Khaleghi Bizaki and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity.
Download or read book VLSI for Wireless Communication written by Bosco Leung and published by Springer Science & Business Media. This book was released on 2011-11-05 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI for Wireless Communication, Second Edition, an advanced level text book, takes a system approach starting with an overview of the most up to date wireless systems and the transceiver architecture available today. Wireless standards are first introduced (updated to include the most recent 3G/4G standards in the second edition), and translates from a wireless standard to the implementation of a transceiver. This system approach is particularly important as the level of integration in VLSI increases and coupling between system and component design becomes more intimate. VLSI for Wireless Communication, Second Edition, illustrates designs with full design examples. Each chapter includes at least one complete design example that helps explain the architecture/circuits presented in this text. This book has close to 10 homework problems at the end of each chapter. A complete solutions manual is available on-line. VLSI for Wireless Communication, Second Edition, is designed as a primary text book for upper-undergraduate level students and graduate level students concentrating on electrical engineering and computer science. Professional engineers and researchers working in wireless communications, circuit design and development will find this book valuable as well.
Download or read book The Designer s Guide to High Purity Oscillators written by Emad Eldin Hegazi and published by Springer Science & Business Media. This book was released on 2006-07-18 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: try to predict it using mathematical expressions. His heuristic model without mathematical proof is almost universally accepted. However, it entails a c- cuit specific noise factor that is not known a priori and so is not predictive. In this work, we attempt to address the topic of oscillator design from a diff- ent perspective. By introducing a new paradigm that accurately captures the subtleties of phase noise we try to answer the question: 'why do oscillators behave in a particular way?' and 'what can be done to build an optimum design?' It is also hoped that the paradigm is useful in other areas of circuit design such as frequency synthesis and clock recovery. In Chapter 1, a general introduction and motivation to the subject is presented. Chapter 2 summarizes the fundamentals of phase noise and timing jitter and discusses earlier works on oscillator's phase noise analysis. Chapter 3 and Chapter 4 analyze the physical mechanisms behind phase noise generation in current-biased and Colpitts oscillators. Chapter 5 discusses design trade-offs and new techniques in LC oscillator design that allows optimal design. Chapter 6 and Chapter 7 discuss a topic that is typically ignored in oscillator design. That is flicker noise in LC oscillators. Finally, Chapter 8 is dedicated to the complete analysis of the role of varactors both in tuning and AM-FM noise conversion.
Download or read book MEMS Silicon Oscillating Accelerometers and Readout Circuits written by Yong Ping Xu and published by CRC Press. This book was released on 2022-09-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most MEMS accelerometers on the market today are capacitive accelerometers that are based on the displacement sensing mechanism. This book is intended to cover recent developments of MEMS silicon oscillating accelerometers (SOA), also referred to as MEMS resonant accelerometer. As contrast to the capacitive accelerometer, the MEMS SOA is based on the force sensing mechanism, where the input acceleration is converted to a frequency output. MEMS Silicon Oscillating Accelerometers and Readout Circuits consists of six chapters and covers both MEMS sensor and readout circuit, and provides an in-depth coverage on the design and modelling of the MEMS SOA with several recently reported prototypes. The book is not only useful to researchers and engineers who are familiar with the topic, but also appeals to those who have general interests in MEMS inertial sensors. The book includes extensive references that provide further information on this topic.
Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the extended and revised editions of all the talks of the ninth AACD Workshop held in Hotel Bachmair, April 11 - 13 2000 in Rottach-Egem, Germany. The local organization was managed by Rudolf Koch of Infineon Technologies AG, Munich, Germany. The program consisted of six tutorials per day during three days. Experts in the field presented these tutorials and state of the art information is communicated. The audience at the end of the workshop selects program topics for the following workshop. The program committee, consisting of Johan Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Broadcom Netherlands BV Bunnik elaborates the selected topics into a three-day program and selects experts in the field for presentation. Each AACD Workshop has given rise to publication of a book by Kluwer entitled "Analog Circuit Design". A series of nine books in a row provides valuable information and good overviews of all analog circuit techniques concerning design, CAD, simulation and device modeling. These books can be seen as a reference to those people involved in analog and mixed signal design. The aim of the workshop is to brainstorm on new and valuable design ideas in the area of analog circuit design. It is the hope of the program committee that this ninth book continues the tradition of emerging contributions to the design of analog and mixed signal systems in Europe and the rest of the world.
Download or read book Noise Analysis of Radio Frequency Circuits written by Amit Mehrotra and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predicting noise in RF systems at the design stage is extremely important. This book concentrates on developing noise simulation techniques for RF circuits. The authors present a novel approach of performing noise analysis for RF circuits.
Download or read book Classical and Quantum Parametric Phenomena written by Oded Zilberberg and published by Oxford University Press. This book was released on 2023-09-26 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical and Quantum Parametric Phenomena provides an overview of the phenomena arising when parametric pumping is applied to oscillators. These phenomena include parametric amplification, noise squeezing, spontaneous symmetry breaking, activated switching, cat states, and synthetic Ising spin lattices. To understand these effects, topics are introduced such as nonlinear and stochastic dynamics, coupled systems, and quantum mechanics. Throughout the book, introductions are succinct as possible and attention is focused on understanding parametric oscillators. As a result, the text helps readers to familiarize themselves with many aspects of parametric systems and understand the common theoretical origin of nanomechanical sensors, optical amplifiers, and superconducting qubits. Parametric phenomena have enabled important scientific breakthroughs over the last decades and are still at the focus of intense research efforts. This book provides a resource for experimental and theoretical physicists entering the field or wishing to gain a deeper understanding of the underlying connections. This includes combining formal and intuitive explanations, accompanied by exercises based on numerical Python codes. This combination allows readers to experience parametric phenomena from various directions and apply their understanding directly to their own projects.
Download or read book Multifrequency Electron Paramagnetic Resonance written by Sushil K. Misra and published by John Wiley & Sons. This book was released on 2011-03-31 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a systematic, authoritative, and up-to-date review of this cutting-edge technique, this book covers both low and high frequency EPR, emphasizing the importance of adopting the multifrequency approach to study paramagnetic systems in full detail by using the EPR method. In so doing, it discusses not only the underlying theory and applications, but also all recent advances -- with a final section devoted to future perspectives.
Download or read book Fabrication and Design of Resonant Microdevices written by Behraad Bahreyni and published by William Andrew. This book was released on 2008-10-20 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the main issues of fabrication and design, and applications of micromachined resonant devices, including techniques commonly used for processing the output signal of resonant micro-electro-mechanical systems (MEMS). Concepts of resonance are introduced, with an overview of fabrication techniques for micromachined devices – important to understand as design options will depend on how the device will be fabricated. Also explained: excitation and signal detection methods; an analytic model of device behavior (a valuable design tool); numerical simulation techniques; issues of damping and noise for resonant MEMS; electronic interfacing; packaging issues; and numerous examples of resonant MEMS from academia and industry. - Offers numerous academic and industrial examples of resonant MEMS - Provides an analytic model of device behaviour - Explains two-port systems in detail - Devotes ample space to excitation and signal detection methods - Covers issues of damping and noise for resonant MEMS, two topics of particular importance for high-Q devices
Download or read book Development of CMOS MEMS NEMS Devices written by Jaume Verd and published by MDPI. This book was released on 2019-06-25 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro and nano-electro-mechanical system (M/NEMS) devices constitute key technological building blocks to enable increased additional functionalities within Integrated Circuits (ICs) in the More-Than-Moore era, as described in the International Technology Roadmap for Semiconductors. The CMOS ICs and M/NEMS dies can be combined in the same package (SiP), or integrated within a single chip (SoC). In the SoC approach the M/NEMS devices are monolithically integrated together with CMOS circuitry allowing the development of compact and low-cost CMOS-M/NEMS devices for multiple applications (physical sensors, chemical sensors, biosensors, actuators, energy actuators, filters, mechanical relays, and others). On-chip CMOS electronics integration can overcome limitations related to the extremely low-level signals in sub-micrometer and nanometer scale electromechanical transducers enabling novel breakthrough applications. This Special Issue aims to gather high quality research contributions dealing with MEMS and NEMS devices monolithically integrated with CMOS, independently of the final application and fabrication approach adopted (MEMS-first, interleaved MEMS, MEMS-last or others).]
Download or read book Handbook of Electron Spin Resonance written by Charles P. Jr. Poole and published by Springer Science & Business Media. This book was released on 1999-11-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the first volume, Professors Poole and Farach provided one of the first definitive reference tools for this field. In this second volume, the authors present a comprehensive source for subfields of ESR not covered in the first volume, including: * Sensitivity * Field Swept versus Frequency Swept Spectra * Resonators * Line Shapes * Electron Spin Echo Envelope Modulation * Hamiltonian types and symmetries * ESR Imaging * High Magnetic Fields and High Frequencies. Written by recognized experts in the field, and intended for students and researchers, these handbooks bring together wide-ranging data from diverse disciplines within ESR, and then integrate it into a comprehesive and definitive resource. An invaluable reference for all those involved in ESR research.
