Download or read book Compound specific Stable Isotope Analysis written by Maik A Jochmann and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of Compound-specific Stable Isotope Analysis (CSIA) is increasing in many areas of science and technology for source allocation, authentication, and characterization of transformation reactions. Until now, there have been no textbooks available for students with an analytical chemical background or basic introductory books emphasising the instrumentation and theory. This book is the first to focus solely on stable isotope analysis of individual compounds in sometimes complex mixtures. It acts as both a lecture companion for students and a consultant for advanced scientists in fields including forensic and environmental science. The book starts with a brief history of the field before going on to explain stable isotopes from scratch. The different ways to express isotope abundances are introduced together with isotope effects and isotopic fractionation. A detailed account of the required technical equipment and general procedures for CSIA is provided. This includes sections on derivatization and the use of microextraction techniques in GC-IRMS. The very important topic of referencing and calibration in CSIA is clearly described. This differs from approaches used in quantitative analysis and is often difficult for the newcomer to comprehend. Examples of successful applications of CSIA in food authenticity, forensics, archaeology, doping control, environmental science, and extraterrestrial materials are included. Applications in isotope data treatment and presentation are also discussed and emphasis is placed on the general conclusions that can be drawn from the uses of CSIA. Further instrumental developments in the field are highlighted and selected experiments are introduced that may act as a basis for a short practical course at graduate level.

Download or read book Water Quality Engineering written by Mark M. Benjamin and published by John Wiley & Sons. This book was released on 2013-06-13 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the fundamental theory and mathematics of water and wastewater treatment processes By carefully explaining both the underlying theory and the underlying mathematics, this text enables readers to fully grasp the fundamentals of physical and chemical treatment processes for water and wastewater. Throughout the book, the authors use detailed examples to illustrate real-world challenges and their solutions, including step-by-step mathematical calculations. Each chapter ends with a set of problems that enable readers to put their knowledge into practice by developing and analyzing complex processes for the removal of soluble and particulate materials in order to ensure the safety of our water supplies. Designed to give readers a deep understanding of how water treatment processes actually work, Water Quality Engineering explores: Application of mass balances in continuous flow systems, enabling readers to understand and predict changes in water quality Processes for removing soluble contaminants from water, including treatment of municipal and industrial wastes Processes for removing particulate materials from water Membrane processes to remove both soluble and particulate materials Following the discussion of mass balances in continuous flow systems in the first part of the book, the authors explain and analyze water treatment processes in subsequent chapters by setting forth the relevant mass balance for the process, reactor geometry, and flow pattern under consideration. With its many examples and problem sets, Water Quality Engineering is recommended as a textbook for graduate courses in physical and chemical treatment processes for water and wastewater. By drawing together the most recent research findings and industry practices, this text is also recommended for professional environmental engineers in search of a contemporary perspective on water and wastewater treatment processes.

Download or read book Graphene Oxide written by Ayrat M. Dimiev and published by John Wiley & Sons. This book was released on 2016-11-14 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its unique properties, graphene oxide has become one of the most studied materials of the last decade and a great variety of applications have been reported in areas such as sensors, catalysis and biomedical applications. This comprehensive volume systematically describes the fundamental aspects and applications of graphene oxide. The book is designed as an introduction to the topic, so each chapter begins with a discussion on fundamental concepts, then proceeds to review and summarize recent advances in the field. Divided into two parts, the first part covers fundamental aspects of graphene oxide and includes chapters on formation and chemical structure, characterization methods, reduction methods, rheology and optical properties of graphene oxide solutions. Part Two covers numerous graphene oxide applications including field effect transistors, transparent conductive films, sensors, energy harvesting and storage, membranes, composite materials, catalysis and biomedical applications. In each case the differences and advantages of graphene oxide over its non-oxidised counterpart are discussed. The book concludes with a chapter on the challenges of industrial-scale graphene oxide production. Graphene Oxide: Fundamentals and Applications is a valuable reference for academic researchers, and industry scientists interested in graphene oxide, graphene and other carbon materials.

Download or read book Study and Interpretation of the Chemical Characteristics of Natural Water 2nd Ed written by Geological Survey (U.S.) and published by . This book was released on 1961 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Oxidation of Primary Alcohols to Carboxylic Acids written by Gabriel Tojo and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the second volume in a comprehensive encyclopedia of organic reactions, this work provides an elaborated description of the experimental methods used for the oxidation of alcohols to acids. It supplies important data on possible interferences from protecting groups and functional groups, as well as on potential side-reactions. This book is a must for anyone involved in the preparation of organic compounds.

Download or read book Optimizing Water Treatment Plant Performance Using the Composite Correction Program written by and published by . This book was released on 1998 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wastewater Treatment written by D. G. Rao and published by CRC Press. This book was released on 2012-07-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing new technologies that produce clean water and energy from the wastewater treatment process, this book presents recent advancements in wastewater treatment by various technologies such as chemical methods, biochemical methods, membrane separation techniques, and nanotechnology. It addresses sustainable water reclamation, biomembrane treatment processes, advanced oxidation processes, and applications of nanotechnology for wastewater treatment. It also includes integrated cost-based design methodologies. Equations, figures, photographs and tables are included within the chapters to aid reader comprehension. Case studies and examples are included as well.

Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).

Download or read book Emerging Contaminants Vol 2 written by Nadia Morin-Crini and published by Springer Nature. This book was released on 2021-04-28 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging contaminants are chemical and biological agents for which there is growing concern about their potential health and environmental effects. The threat lies in the fact that the sources, fate and toxicology of most of these compounds have not yet been studied. Emerging contaminants, therefore, include a large number of both recently discovered and well-known compounds such as rare earth elements, viruses, bacteria, nanomaterials, microplastics, pharmaceuticals, endocrine disruptors, hormones, personal care products, cosmetics, pesticides, surfactants and industrial chemicals. Emerging contaminants have been found in many daily products, and some of them accumulate in the food chain. Correlations have been observed between aquatic pollution by emerging contaminants and discharges from wastewater treatment plants. Most actual remediation methods are not effective at removing emerging contaminants. This second volume presents comprehensive knowledge on emerging contaminants with a focus on remediation.

Download or read book Green Production of Carbon Nanomaterials in Molten Salts and Applications written by Ali Reza Kamali and published by Springer Nature. This book was released on 2020-01-10 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the possible interactions that might occur between carbon materials and molten salts, and discusses the mechanisms involved in detail, highlighting possible future developments in the field. Carbon materials can be exposed to molten salts in various technologically important applications, such as in molten salt-nuclear reactors and aluminum production electrolysis cells. As such, numerous studies have investigated the possible interactions between carbon and molten salts. In addition, various interesting carbon nanostructures have recently been produced in molten salts, including carbon nanotubes, graphene and nanodiamonds with a number of attractive applications. With abundant images and graphs supporting the discussion, this book appeals to researchers working in the field of carbon nanostructures, carbon capture and conversion, nuclear reactors, energy storage, molten salts and related areas of science and technology.

Download or read book Water Quality written by Claude E. Boyd and published by Springer Nature. This book was released on 2019-09-12 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is of great importance to humans and other living organisms. The study of water quality draws information from a variety of disciplines including chemistry, biology, mathematics, physics, engineering, and resource management. University training in water quality is often limited to specialized courses in engineering, ecology, and fisheries curricula. This book also offers a basic understanding of water quality to professionals who are not formally trained in the subject. The revised third edition updates and expands the discussion, and incorporates additional figures and illustrative problems. Improvements include a new chapter on basic chemistry, a more comprehensive chapter on hydrology, and an updated chapter on regulations and standards. Because it employs only first-year college-level chemistry and very basic physics, the book is well-suited as the foundation for a general introductory course in water quality. It is equally useful as a guide for self-study and an in-depth resource for general readers.

Download or read book Advanced Nano Bio Technologies for Water and Soil Treatment written by Jan Filip and published by Springer Nature. This book was released on 2020-01-17 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are proposing this comprehensive volume aimed at bridging and bonding of the theory and practical experiences for the elimination of a broad range of pollutants from various types of water and soil utilizing innovative nanotechnologies, biotechnologies and their possible combinations. Nowadays, a broad range of contaminants are emerging from the industry (and also representing old ecological burdens). Accidents and improper wastewater treatment requires a fast, efficient and cost-effective approach. Therefore, several innovative technologies of water and soil treatments have been invented and suggested in a number of published papers. Out of these, some nanotechnologies and biotechnologies (and possibly also their mutual combinations) turned out to be promising for practical utilization – i.e., based on both extensive laboratory testing and pilot-scale verification. With respect to the diverse character of targeted pollutants, the key technologies covered in this book will include oxidation, reduction, sorption and/or biological degradation. In relation to innovative technologies and new emerging pollutants mentioned in this proposed book, an important part will also cover the ecotoxicity of selected pollutants and novel nanomaterials used for remediation. Thus, this work will consist of 8 sections/chapters with a technical appendix as an important part of the book, where some technical details and standardized protocols will be clearly presented for their possible implementation at different contaminated sites. Although many previously published papers and books (or book chapters) are devoted to some aspects of nano-/biotechnologies, here we will bring a first complete and comprehensive treatise on the latest progress in innovative technologies with a clear demonstration of the applicability of particular methods based on results of the authors from pilot tests (i.e., based on the data collected within several applied projects, mainly national project “Environmentally friendly nanotechnologies and biotechnologies in water and soil treatment” of the Technology Agency of the Czech Republic, and 7FP project NANOREM: “Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment”). This multidisciplinary book will be suitable for a broad audience including environmental scientists, practitioners, policymakers and toxicologists (and of course graduate students of diverse fields – material science, chemistry, biology, geology, hydrogeology, engineering etc.).

Download or read book Quality and Treatment of Drinking Water II written by Jiri Hrubec and published by Springer. This book was released on 2014-04-17 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drinking water quality is a vast and complex subject. In addition to the topics already addressed in Volume 5, part B of this Handbook in 1995, this new volume discusses in an authoritative way the current key issues of drinking water quality and its control: - Toxicity tests for assessing drinking water quality - Toxicological approaches for developing drinking water standards - Analysis of organic micropollutants - Algal toxins and human health - Quality changes due to application of ozone and chlorine dioxide. The articles are written by leading experts and present the state of the art of drinking water research. This volume will therefore be a valuable source not only for scientists and engineers, but also for decision-makers in government, environmental control and industry.

Download or read book Metal Catalyzed Oxidations of Organic Compounds written by Roger Sheldon and published by Elsevier. This book was released on 2012-12-02 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Catalyzed Oxidations of Organic Compounds: Mechanistic Principles and Synthetic focuses on the oxidative transformations of functional groups. This book explores oxidation as being extensively used in the laboratory synthesis of fine organic chemicals and in the manufacture of large-volume petrochemicals. Organized into two parts encompassing 13 chapters, this book starts with an overview of the mechanistic principles of oxidation–reduction in biochemical, organic, and inorganic systems. This text then proceeds with a discussion of the use of molecular oxygen, hydrogen peroxide, and alkyl hydroperoxides as primary oxidants. Other chapters explore stoichiometric oxidations with metal oxidants, which include permanganate and chromic acid. This book discusses as well the synthetic applications of catalytic oxidations as well as the technology of petrochemical oxidation. The final chapter deals with the autoxidations of sulfur, phosphorus, and nitrogen compounds. This book is intended for chemists involved in organic synthesis, catalysis, and organometallic chemistry, both in academic institutions and in industrial laboratories.

Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2021-06-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume looks at modern approaches to catalysis and reviews the extensive literature. Chapters highlight application of 2D materials in biomass conversion catalysis, plasmonic photocatalysis, catalytic demonstration of mesoporosity in the hierarchical zeolite and the effect of surface phase oxides on supported metals and catalysis. Looking to the future a chapter on ab initio machine learning for accelerating catalytic materials discovery is included. Appealing broadly to researchers in academia and industry, these illustrative chapters bridge the gap from academic studies in the laboratory to practical applications in industry not only for catalysis field but also for environmental protection. Other chapters with an industrial perspective include heterogeneous and homogeneous catalytic routes for vinyl acetate synthesis, catalysis for production of jet fuel from renewable sources by HDO/HDC and microwave-assisted catalysis for fuel conversion. Chemical reactions in ball mills is also explored. The book will be of great benefit to any researcher wanting a succinct reference on developments in this area now and looking to the future.

Download or read book In Situ Chemical Oxidation for Groundwater Remediation written by Robert L. Siegrist and published by Springer Science & Business Media. This book was released on 2011-02-25 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.

Download or read book Wastewater Treatment and Reuse Theory and Design Examples Volume 2 written by Syed R. Qasim and published by CRC Press. This book was released on 2017-11-22 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will present the theory involved in wastewater treatment processes, define the important design parameters involved, and provide typical values of these parameters for ready reference; and also provide numerical applications and step-by-step calculation procedures in solved examples. These examples and solutions will help enhance the readers’ comprehension and deeper understanding of the basic concepts, and can be applied by plant designers to design various components of the treatment facilities. It will also examine the actual calculation steps in numerical examples, focusing on practical application of theory and principles into process and water treatment facility design.