EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Practical Batch Process Management

Download or read book Practical Batch Process Management written by Mike Barker and published by Elsevier. This book was released on 2004-11-18 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically batch control systems were designed individually to match a specific arrangement of plant equipment. They lacked the ability to convert to new products without having to modify the control systems, and did not lend themselves to integration with manufacturing management systems. Practical Batch Management Systems explains how to utilize the building blocks and arrange the structures of modern batch management systems to produce flexible schemes suitable for automated batch management, with the capability to be reconfigured to use the same plant equipment in different combinations. It introduces current best practice in the automation of batch processes, including the drive for integration with MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) products from major IT vendors. References and examples are drawn from DCS / PLC batch control products currently on the market.- Implement modern batch management systems that are flexible and easily reconfigured - Integrate batch management with other manufacturing systems including MES and ERP - Increase productivity through industry best practice

Book Design Synthesis

Download or read book Design Synthesis written by Graeme Arthur Britton and published by CRC Press. This book was released on 2013-10-28 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biggest challenge in any marketplace is uncertainty. The major changes taking place in world economies, politics, and demographics has raised market uncertainty to its highest level in the past 50 years. However, with new markets opening up in emerging and developing economies, the opportunities have never been better. To compete in this challe

Book Handbook of Manufacturing Control

Download or read book Handbook of Manufacturing Control written by Hermann Lödding and published by Springer Science & Business Media. This book was released on 2012-12-13 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unternehmen mit kurzen Lieferzeiten, hoher Liefertreue und niedrigen Beständen wachsen schnell und erzielen hohe Gewinne. Wie Unternehmen diese logistische Herausforderung meistern können, zeigt das Buch anhand von aktuellen Forschungsergebnissen der Leibniz Universität Hannover. Der Band gibt einen umfassenden Überblick über die Aufgaben und Verfahren der Fertigungssteuerung und befähigt Leser dazu, Schwächen in diesem Bereich zu erkennen und zu korrigieren. Ein fundiertes Nachschlagewerk für Studierende, Dozenten, Ingenieure und Wissenschaftler.

Book CELLULAR MANUFACTURING SYSTEMS

Download or read book CELLULAR MANUFACTURING SYSTEMS written by B.S. NAGENDRA PARASHAR and published by PHI Learning Pvt. Ltd.. This book was released on 2008-10-24 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular manufacturing, an application of group technology, is a stepping stone to achieve world class manufacturing status. It has emerged as an important technique to cope up with fast changing industrial demands for the application of newer manufacturing systems. This comprehensive and well written text deals with all facets of cellular manufacturing right from introduction to application in a chronological order. The book first introduces cell formation techniques, followed by elimination of exceptional components, evaluation of solutions, cell characteristics, and production control issues like scheduling; line balancing and inventory control. Finally it discusses about the application of cellular manufacturing in a large public sector.The text is supported by numerous figures, tables and examples, and also furnishes simple algorithms for complex methods. Primarily intended for the postgraduate students of mechanical engineering and production engineering with specialization in manufacturing systems/group technology, it will also be useful for the researchers, scientists and professionals as a reference book.

Book An Introduction to Computer Aided Production Management

Download or read book An Introduction to Computer Aided Production Management written by S. Childe and published by Springer Science & Business Media. This book was released on 1996-11-30 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of manufacturing operations is of crucial importance in industry. The correct regulation of manufacturing activities makes the difference between meeting and missing customer requirements. Nowadays computerised solutions are available as an aid to production management. However, many companies proceed to use sophisticated computer tools without first understanding the basic operating principles. This book is written for students of manufacturing systems as well as people in industry who need a concise explanation of the concepts of Computer Aided Production Management (CAPM) or who may be looking for new ideas.

Book Advanced Ph Measurement and Control

Download or read book Advanced Ph Measurement and Control written by Gregory K. McMillan and published by ISA. This book was released on 2004-10-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Real Time Programming 1985

Download or read book Real Time Programming 1985 written by G.M. Bull and published by Elsevier. This book was released on 2014-06-28 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the entire field of real-time programming, with emphasis on the most recent developments in industrial control and the design of process control systems. The topics covered include programming of statistical quality control applications, graphical languages for real-time programming, programming of personal computers and work stations for real-time applications. Contains 17 papers.

Book OPERATIONS MANAGEMENT

Download or read book OPERATIONS MANAGEMENT written by SUBIMAL BHATTACHARYA and published by PHI Learning Pvt. Ltd.. This book was released on 2014-06-02 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful Operations Management (OM) requires a totality perspective: it has to have a cross-functional approach, involving all operations functions, such as Engineering, Human Resource Management (HRM), Purchasing, Manufacturing, Logistics, Accounting, Finance, and Marketing. This book comprehensively delves on all components of Operations Management, and pans out practical approaches for their effective and efficient handling. The book shows how Operations Management integrates the Top management, i.e. strategic level; Middle management, i.e. tactical level; and Functional management, i.e. operational slevel functions, to complement each other. Divided into 11 sections containing 28 chapters, the book extensively elucidates processes to formulate successful products and services, tools and measures of quality control standards (TQM), and various effective Supply Chain Management techniques. Along with theoretical expositions, the concepts are exemplified with Real-Life Cases and Examples throughout. The book is primarily intended for the postgraduate students of Management and Engineering—Production, Industrial and Mechanical. Also, the book will be equally useful for the management and engineering professionals.

Book Directing the Flow of Product

Download or read book Directing the Flow of Product written by Jeffrey H. Schutt and published by J. Ross Publishing. This book was released on 2004-05-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: While good software and data are necessities foreffective supply chain planning, the right processes,policies, and organization are the most powerful keys forreducing costs and providing high service. This bookreviews the state-of-the-art in production anddistribution planning and presents principles and methodsthrough which ......

Book Advances in Manufacturing Technology

Download or read book Advances in Manufacturing Technology written by P.F. Mcgoldrick and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book IFIP Glossary of Terms Used in Production Control

Download or read book IFIP Glossary of Terms Used in Production Control written by J.L. Burbidge and published by Elsevier. This book was released on 2012-12-02 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is at present no universally accepted source giving definitions in English of the principal terms used in Production Control and in closely related areas. Most of the dictionaries and glossaries which do exist in this field fail to cover the full range of ideas which need to be considered during an intelligent discussion of the subject. Definitions given in different sources for Production Control terms differ not only in wording, but also in many cases in the concepts which they cover.The IFIP Glossary is intended to meet this perceived need, the immediate audience for the book being IFIP WG 5.7, the working group concerned with the automation of Production Management and other related subjects.The Glossary is organised in the following way: - The subject field was classified into sub-fields by Management function. - Each of these sub-fields was analysed to discover the main concepts with which it is concerned. - Terms were selected for each concept, using as far as possible terms which are already in common use. - Definitions were selected or written for each term.This approach of starting with subject classification is believed to be new in the field of production.Care has been taken to check the Glossary with the APICS dictionary (USA), and with British standards. Notes are included in Part 2 to explain the reasons for selecting a particular meaning for a term, in those cases where there are wide differences in the meanings chosen by different sources.Some consensus about the meaning of words is essential for communication. On the other hand, there is a danger that if the accepted framework of meanings is too rigid, if may hinder the future development of the discipline. It is hoped that a reasonable balance has been found between these conflicting influences. The Glossary should be useful not only to WG 5.7 members, but also to Engineers and Academics in all countries where a knowledge of English is important to industrial development.

Book Kirk Othmer Encyclopedia of Chemical Technology  Volume 20

Download or read book Kirk Othmer Encyclopedia of Chemical Technology Volume 20 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2006-04-07 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. * Set began publication in January 2004 * Over 1,000 articles * More than 600 new or updated articles 27 volumes

Book Group Technology

Download or read book Group Technology written by Inyong Ham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mass productio!l and mass consumption, so far considered virtues in a free economic soceity, have changed. Various problems have occurred including economic stagnation, energy crisis, shortage of material resources, prolifera tion of pollution, lack of skilled labor, rapid changes of product design, technical innovation, and others. Moreover, individual manufacturing firms must take steps to adopt multi-product, small-lot-sized (batch type) produc tion as a type of production in order to adapt themselves to a market movement characterized by a diversified and specialty-oriented society and a short product life cycle. The number of manufacturing firms worldwide that use a type of multi-product, small-lot-sized production is expected to increase. This is so even in the United States, which has been said to be a country of mass production. Multi-product, small-lot-sized production has been considered to be a milestone to flow-type mass production, which has been thought to be the most effective production system. Intensive efforts have been made to investigate mass production systems from both theoretical and practical viewpoints. Few studies have been made for multi-product, small-lot-sized production (batch-type manufacturing). Considering the present business circumstances faced with various difficulties, it is strongly required to establish some theories useful for making practically effective and flexible multi-product, small-lot-sized production systems. Several effective approaches to the batch-type manufacturing systems have been developed. Group technology (GT) is one such method that has steadily obtained great interest from progressive manufacturing firms all over the world.

Book Group Technology and Cellular Manufacturing

Download or read book Group Technology and Cellular Manufacturing written by Nallan C. Suresh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Group Technology and Cellular Manufacturing (GT/CM) have been widely-researched areas in the past 15 years and much progress has been made in all branches of GT/CM. Resulting from this research activity has been a proliferation of techniques for part-machine grouping, engineering data bases, expert system-based design methods for identifying part families, new analytical and simulation tools for evaluating performance of cells, new types of cell incorporating robotics and flexible automation, team-based approaches for organizing the work force and much more; however, the field lacks a careful compilation of this research and its outcomes. The editors of this book have commissioned leading researchers and implementers to prepare specific treatments of topics for their special areas of expertise in this broad-based philosophy of manufacturing. The editors have sought to be global both in coverage of topic matters and contributors. Group Technology and Cellular Manufacturing addresses the needs and interests of three groups of individuals in the manufacturing field: academic researchers, industry practitioners, and students. (1) The book provides an up-to-date perspective, incorporating the advances made in GT/CM during the past 15 years. As a natural extension to this research, it synthesizes the latest industry practices and outcomes to guide research to greater real-world relevance. (2) The book makes clear the foundations of GT/CM from the core elements of new developments which are aimed at reducing developmental and manufacturing lead times, costs, and at improving business quality and performance. (3) Finally, the book can be used as a textbook for graduate students in engineering and management for studying the field of Group Technology and Cellular Manufacturing.

Book The Principles of Production Control

Download or read book The Principles of Production Control written by John L. Burbidge and published by MacDonald & Evans. This book was released on 1978 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Advances in Production Management Systems

Download or read book Advances in Production Management Systems written by E. Eloranta and published by Elsevier. This book was released on 2012-12-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.