Download or read book Performance of Concrete Containing Ground Granulated Blast Furnace Slag as Cement Replacement written by Abdul Chalid and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effects of Ground Granulated Blast Furnace Slag in Portland Cement Concrete written by Irene K. LaBarca and published by . This book was released on 2007 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research examined the properties of concrete containing grade 120 slag cement at replacement levels of 0%, 30%, and 50%. The primary concrete properties studied were compressive strength, split-tensile strength, and deicer scaling resistance. Material variations included four sources of ordinary portland cement and two types of coarse aggregate. Strength properties were studied at room temperature and 40°F mix and curing conditions. Deicer scaling resistance was studied for concrete cured under six curing conditions. Carbonation of concrete cured under these six conditions was also investigated.

Download or read book CIGOS 2019 Innovation for Sustainable Infrastructure written by Cuong Ha-Minh and published by Springer Nature. This book was released on 2019-10-10 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected articles from the 5th International Conference on Geotechnics, Civil Engineering Works and Structures, held in Ha Noi, focusing on the theme “Innovation for Sustainable Infrastructure”, aiming to not only raise awareness of the vital importance of sustainability in infrastructure development but to also highlight the essential roles of innovation and technology in planning and building sustainable infrastructure. It provides an international platform for researchers, practitioners, policymakers and entrepreneurs to present their recent advances and to exchange knowledge and experience on various topics related to the theme of “Innovation for Sustainable Infrastructure”.

Download or read book Research Project Evaluation of Portland Cement Concretes Containing Ground Granulated Blast Furnace Slag written by Allen Lee Sehn and published by . This book was released on 2002 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two part laboratory experimental program was conducted to evaluate strength and durability of various concrete mix designs. In Part I of the study, the influence of using Grade 120 ground granulated blast furnace slag (GGBFS) on the strength and durability properties of concrete was evaluated. GGBFS was used to replace Portland cement at replacement rates ranging from 0 to 75 percent. In Part II of the study, the influence of coarse aggregate size on the strength and durability of the ODOT Class C mix designs was evaluated. Coarse aggregate sizes included #57, #46, and #357. The ODOT high performance concrete mix designs were also included in this study.

Download or read book Concrete at High Temperatures written by Zdeněk P. Bažant and published by Prentice Hall. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increased use of concrete in high temperature environments, it is essential for engineers to have a knowledge of the properties and mathematical modelling of concrete in such extreme conditions. Bringing together, for the first time, vast amounts of data previously scattered throughout numerous papers and periodicals, this book provides, in two parts, a comprehensive and systematic review of both the properties and the mathematical modelling of concrete at high temperatures. Part I provides a comprehensive description of the material properties of concrete at high temperatures. Assuming only a basic knowledge of mathematics, the information is presented at an elementary level suitable for graduates of civil engineering or materials science. Part II describes the response of concrete to high temperatures in precise terms based on mathematical modelling of physical processes. Suitable for advanced graduate students, researchers and specialists, it presents detailed mathematical models of phenomena such as heat transfer, moisture diffusion, creep, volume changes, cracking and fracture. Concrete at High Temperatures will prove a valuable reference source to university researchers and graduate students in civil engineering and materials science, engineers in research laboratories, and practising engineers concerned with fire resistance, concrete structures for nuclear reactors and chemical technology vessels.

Download or read book Evaluation of Portland Cement Concretes Containing Ground Granulated Blast Furnace Slag written by Allen Lee Sehn and published by . This book was released on 2002 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two part laboratory experimental program was conducted to evaluate strength and durability of various concrete mix designs. In Part I of the study, the influence of using Grade 120 ground granulated blast furnace slag (GGBFS) on the strength and durability properties of concrete was evaluated. GGBFS was used to replace Portland cement at replacement rates ranging from 0 to 75 percent. In Part II of the study, the influence of coarse aggregate size on the strength and durability of the ODOT Class C mix designs was evaluated. Coarse aggregate sizes included #57, #46, and #357. The ODOT high performance concrete mix designs were also included in this study.

Download or read book Supplementary Cementing Materials written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.

Download or read book Waste Materials and By Products in Concrete written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2007-11-13 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.

Download or read book Effect of Ground Granulated Blast Furnace Slag on the Performance of Concrete Produced with Variations in Cement Brand and Aggregate written by Chad Sippel and published by . This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interfacial Transition Zone in Concrete written by J.C. Maso and published by CRC Press. This book was released on 2004-03-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: An important new state-of-the-art report prepared by RILEM Technical Committee 108 ICC. It has been written by a team of leading international experts from the UK, USA, Canada, Israel, Germany, Denmark, South Africa, Italy and France. Research studies over recent years in the field of cement science have focused on the behaviour of the interfaces between the components of cement-based materials. The techniques used in other areas of materials science are being applied to the complex materials found in cements and concretes, and this book provides a significant survey of the present state of the art.

Download or read book Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials written by Nele De Belie and published by Springer. This book was released on 2017-12-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the current knowledge on the effect of SCMs (slag, fly ash, silica fume, limestone powder, metakaolin, natural pozzolans, rice husk ash, special SCMs, ternary blends) on the properties of fresh and hardened concrete (e.g. early strength development, workability, shrinkage) and curing requirements. Other topics treated in the book are postblending vs preblending, implications of SCM variability, interaction between SCM and commonly used admixtures (e.g. superplasticizers, air entrainers).

Download or read book The Concrete Age written by and published by . This book was released on 1912 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pozzolanic and Cementitious Materials written by V.M. Malhotra and published by CRC Press. This book was released on 2004-11-11 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of the mineral admixtures used in concrete, including silica fume, slag, rice-husk ash, fly ash and natural pozzolans. It also includes the mineral/chemical composition of the admixtures, their chemical reactions with cement and as a method of recycling.

Download or read book Developments in the Formulation and Reinforcement of Concrete written by Sidney Mindess and published by Woodhead Publishing. This book was released on 2019-06-26 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the Formulation and Reinforcement of Concrete, Second Edition, presents the latest developments on topics covered in the first edition. In addition, it includes new chapters on supplementary cementitious materials, mass concrete, the sustainably of concrete, service life prediction, limestone cements, the corrosion of steel in concrete, alkali-aggregate reactions, and concrete as a multiscale material. The book's chapters introduce the reader to some of the most important issues facing today's concrete industry. With its distinguished editor and international team of contributors, users will find this to be a must-have reference for civil and structural engineers. Summarizes a wealth of recent research on structural concrete, including material microstructure, concrete types, and variation and construction techniques Emphasizes concrete mixture design and applications in civil and structural engineering Reviews modern concrete materials and novel construction systems, such as the precast industry and structures requiring high-performance concrete

Download or read book Applied Petroleum Geomechanics written by Jon Jincai Zhang and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today’s advanced oil and gas operations. Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories Bridges the gap between theory of rock mechanics and practical oil and gas applications Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity

Download or read book Characteristics and Uses of Steel Slag in Building Construction written by Ivanka Netinger Grubeša and published by Woodhead Publishing. This book was released on 2016-05-20 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characteristics and Uses of Steel Slag in Building Construction focuses predominantly on the utilization of ferrous slag (blast furnace and steel slag) in building construction. This extensive literature review discusses the worldwide utilization of ferrous slag and applications in all sectors of civil engineering, including structural engineering, road construction, and hydro-technical structures. It presents cutting-edge research on the characteristics and properties of ferrous slag, and its overall impact on the environment. Comprehensively reviews the literature on the use of blast furnace and steel slag in civil engineering Examines the environmental impact of slag production and its effect on human health Presents cutting-edge research from worldwide studies on the use of blast furnace and steel slag

Download or read book Regeneration of the Built Environment from a Circular Economy Perspective written by Stefano Della Torre and published by Springer Nature. This book was released on 2019-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the strategic importance and advantages of adopting multidisciplinary and multiscalar approaches of inquiry and intervention with respect to the built environment, based on principles of sustainability and circular economy strategies. A series of key challenges are considered in depth from a multidisciplinary perspective, spanning engineering, architecture, and regional and urban economics. These challenges include strategies to relaunch socioeconomic development through regenerative processes, the regeneration of urban spaces from the perspective of resilience, the development and deployment of innovative products and processes in the construction sector in order to comply more fully with the principles of sustainability and circularity, and the development of multiscale approaches to enhance the performance of both the existing building stock and new buildings. The book offers a rich selection of conceptual, empirical, methodological, technical, and case study/project-based research. It will be of value for all who have an interest in regeneration of the built environment from a circular economy perspective.