Download or read book Performance of Bituminous and Hydraulic Materials in Pavements written by S.F. Brown and published by Routledge. This book was released on 2017-10-02 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains contributions from international experts, reflecting the rapid advances in the design of new improved bitumen and hydraulic bound composites, the trends in the use of waste and recycled materials and up-to-date methods of testing and evaluation.
Download or read book Bituminous Mixtures and Pavements VIII written by A.F. Nikolaides and published by CRC Press. This book was released on 2024-06-21 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.
Download or read book Advanced Testing and Characterization of Bituminous Materials Two Volume Set written by Andreas Loizos and published by CRC Press. This book was released on 2009-05-14 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing
Download or read book Sustainable Designed Pavement Materials Volume 2 written by Yue Xiao and published by MDPI. This book was released on 2020-12-06 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Sustainable Designed Pavement Materials” has been proposed and organized as a means to present recent developments in the field of environmentally-friendly designed pavement materials. For this reason, articles included in this special issue relate to different aspects of pavement materials, from industry solid waste recycling to pavement materials recycling, from pavement materials modification to asphalt performance characterization, from pavement defect detection to pavement maintenance, and from asphalt pavement to cement concrete pavement.
Download or read book Performance and Durability of Bituminous Materials written by J.G. Cabrera and published by CRC Press. This book was released on 2003-09-02 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers new advances in materials and methods, particularly orientated towards the optimization of energy expenditure required for the preparation of aggregates, bituminous binders and bituminous mixtures and the implications which arise with regard to the European specifications and codes of practice.
Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
Download or read book Bituminous Mixtures and Pavements VII written by A.F. Nikolaides and published by CRC Press. This book was released on 2019-05-24 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway engineers are facing the challenge not only to design and construct sustainable and safe pavements properly and economically. This implies a thorough understanding of materials behaviour, their appropriate use in the continuously changing environment, and implementation of constantly improved technologies and methodologies. Bituminous Mixtures and Pavements VII contains more than 100 contributions that were presented at the 7th International Conference ‘Bituminous Mixtures and Pavements’ (7ICONFBMP, Thessaloniki, Greece 12-14 June 2019). The papers cover a wide range of topics: - Bituminous binders - Aggregates, unbound layers and subgrade - Bituminous mixtures (Hot, Warm and Cold) - Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration) - Pavement management - Pavement recycling - Geosynthetics - Pavement assessment, surface characteristics and safety - Posters Bituminous Mixtures and Pavements VII reflects recent advances in highway materials technology and pavement engineering, and will be of interest to academics and professionals interested or involved in these areas.
Download or read book Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems written by Manfred N. Partl and published by Springer. This book was released on 2018-02-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.
Download or read book Roads and Airports Pavement Surface Characteristics written by Maurizio Crispino and published by CRC Press. This book was released on 2023-06-05 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roads and Airports Pavement Surface Characteristics contains the papers presented at the 9th International Symposium on Pavement Surface Characteristics (SURF 2022, Milan, Italy, 12-14 September 2022). The symposium was jointly organized by the Italian company that manages Italy’s National Roads (ANAS –Ferrovie dello Stato Italiane Group), the World Road Association (PIARC) and Politecnico di Milano. The contributions aim to improve the quality of pavement surface characteristics while accomplishing efficiency, safety, sustainability, and addressing new generation mobility needs. The book covers topics from emerging research to engineering practice, and is divided in the following sections: Advanced and performing construction methods and equipment Next generation mobility Data monitoring and performance assessment Surface features and performances| Maintenance and preservation treatments Pavement management Economic and political strategies Safety and risk issues Minimizing road impacts Sustainability and performances issues about materials and design Pavements surfaces and urban heat islands Weather conditions impact Airport pavements Roads and Airports Pavement Surface Characteristics is of interest to academics, engineers and professionals in the fields of pavement engineering, transport infrastructure, and related disciplines.
Download or read book Advanced Materials and Structural Engineering written by Jong Wan Hu and published by CRC Press. This book was released on 2016-02-03 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ICAMEST 2015 Conference covered new developments in advanced materials and engineering structural technology. Applications in civil, mechanical, industrial and material science are covered in this book. Providing high-quality, scholarly research, addressing developments, applications and implications in the field of structural health monitoring, construction safety and management, sensors and measurements. This volume contains new models for nonlinear structural analysis and applications of modeling identification. Furthermore, advanced chemical materials are discussed with applications in mechanical and civil engineering and for the maintenance of new materials. In addition, a new system of pressure regulating and water conveyance based on small and middle hydropower stations is discussed. An experimental investigation of the ultimate strength and behavior of the three types of steel tubular K-joints was presented. Furthermore, real-time and frequency linear and nonlinear modeling performance of materials of structures contents were concluded with the notion of a fully brittle material, and this approach is implemented in the book by outlining a finite-element method for the prediction of the construction performance and cracking patterns of arbitrary structural concrete forms. This book is an ideal reference for practicing engineers in material, mechanical and civil engineering and consultants (design, construction, maintenance), and can also be used as a reference for students in mechanical and civil engineering courses.
Download or read book Bituminous Mixtures in Road Construction written by Robert N. Hunter and published by Thomas Telford. This book was released on 1994 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year more than 30 million tonnes of bituminous mixtures are laid in the UK in the course of maintenance and improvements of the road network. However, much of the technology associated with road construction and maintenance has never been published - until now. Bituminous mixtures in road construction has been published as the definitive guide to blacktop and addresses the theoretical and practical aspects of the design, manufacture and laying of bituminous mixtures. Written by a team of leading experts, the book provides up-to-the-minute thinking in materials specification, test methods and harmonisation of standards and covers all aspects of fully flexible road construction from foundation design through to surface treatment. In one handy volume, Bituminous mixtures in road construction presents the best of British expertise and will prove to be an essential guide for all engineers working on the construction and maintenance of highways.
Download or read book Implication of Aggregates in the Design Construction and Performance of Flexible Pavements written by Hans G. Schreuders and published by ASTM International. This book was released on 1989 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Long and Deep Tunnels written by Vittorio Guglielmetti and published by CRC Press. This book was released on 2016-04-15 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and construction of “long and deep” tunnels, i.e. tunnels under mountains, characterised by either considerable length and/or overburden, represent a considerable challenge. The scope of this book is not to instruct how to design and construct such tunnels but to share a method to identify the potential hazards related to the process of designing and constructing long and deep tunnels, to produce a relevant comprehensive analysis and listing, to quantify the probability and consequences, and to design proper mitigation measures and countermeasures. The design, developed using probabilistic methods, is verified during execution by means of the so called Plan for Advance of the Tunnel (PAT) method, which allows adapting the design and control parameters of the future stretches of the tunnel to the results of the stretches already finished, using the monitoring data base. Numerous criteria are given to identify the key parameters, necessary for the PAT procedure. Best practices of excavation management with the help of real time monitoring and control are also provided. Furthermore cost and time evaluation systems are analysed. Finally, contractual aspects related to construction by contract are investigated, for best development and application of models more appropriate for tunnelling-construction contracts. The work will be of interest to practising engineers, designers, consultants and students in mining, underground, tunnelling, transportation and construction engineering, as well as to foundation and geological engineers, urban planners/developers and architects.
Download or read book Bituminous Binders and Mixes written by L. Francken and published by CRC Press. This book was released on 2004-03-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the studies presented in this report is the implementation of rational concepts and testing procedures for the design and manufacture of bituminous materials for applications in pavement construction. Practical test procedures are recommended for binder evaluation, mix design and performance assessment of bituminous materials. The three main topics addressed are binder testing, mix design and mechanical testing of mixtures. Each is examined through interlaboratory tests and there is a literary review of existing practices and methods for the production of polymer modified binders, mixture design and the mechanical properties of mixtures.
Download or read book Recent Trends in Construction Technology and Management written by M. S. Ranadive and published by Springer Nature. This book was released on 2022-09-27 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the International Conference on Advances in Construction Technology and Management (ACTM 2021) and explores recent and innovative developments in all aspects of civil engineering. Advanced construction technologies such as 3D printing, intelligently built environment, use of artificial intelligence, smart structures, green buildings, advanced and engineered materials for producing green concrete, and many more such topics are covered in this book. The advanced management tools such as building information modeling, augmented reality, advanced task management software, and one of the most recent technological advancements are drones, which are changing the face of surveying and security are also explored. This book will be useful for researchers, academicians, and practitioners working in the area of civil engineering and allied fields.
Download or read book Proceedings of the 5th International Symposium on Asphalt Pavements Environment APE written by Marco Pasetto and published by Springer Nature. This book was released on 2019-08-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Cement Industry written by Hosam Saleh and published by BoD – Books on Demand. This book was released on 2021-06-09 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement is the basis of the building and construction industry and of fundamental importance for many civil engineering applications. As such, the cement industry is one of the key industries worldwide necessary for the current and future sustainable development of society. Despite its undisputed importance, the cement industry is one of those industrial branches predominately responsible for high energy consumption and excessive generation of large amounts of carbon dioxide and other contaminants that significantly endanger human health and the environment and contributes to global warming.In this context, nanomaterials, polymeric materials, and natural additives are being used for cement enhancement in various applications. This book examines these novel materials and their optimization, characterization, and sustainable application in the building industry and for stabilizing hazardous waste.
