Download or read book Performance Modeling and Simulation for Water Distribution and Wastewater Collection Networks written by Amin Ganjidoost and published by . This book was released on 2016 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade many performance indicators have been developed for water and wastewater utilities. While existing performance indicators allow utilities to track performance over time and with respect to utility set objectives, they do not allow comparison of a utility's performance with respect to another utility. To overcome this deficiency in performance indicators, a series of water and wastewater benchmarking performance indicators are developed that are aggregated into 1) infrastructure, 2) socio-political, and 3) financial. These indicators are normalized and time-integrated to capture the cumulative adjustments made by the utility. A functional demonstration for validation is presented using the Rehan et al. (2013) system dynamics model for three Ontario water utilities with a pay-as-you-go financing strategy to benchmark, forecast and graphically compare each utility's performance over a 100-year benchmarking period. Results demonstrate that different water utilities can be benchmarked against each other using the benchmarking performance indicators. This will allow water utilities' management practices to be compared locally, regionally and nationally regardless of the utility size (small, medium or large) to identify opportunities for improvements and best practices. An implementation framework for water distribution and wastewater collection networks asset management strategy is then developed comprising of three decision-making layers: 1) “visions & values”, 2) “function”, and 3) “performance”. The asset management strategy framework is then implemented and validated through demonstration of functionality and value by using data from three utilities in Ontario, Canada. Results indicate that the three utilities studied achieve the strategic targets established in the visions & values layer over the benchmarking period (100 years). A causal loop diagram for integrated asset management of water distribution and wastewater collection networks is presented. The causal loop diagram lays out the connection points and identifies the interacting feedback loops that exist among the integrated system components. The causal loop diagram is then translated into a system dynamics model comprised of integrated infrastructure, finance and socio-political sectors. The model data requirements and specific tests and procedures to validate the integrated system dynamics model are presented. The integrated model is implemented for a case study of a medium-sized Canadian municipality. The result indicates that the financial capacity to pay for capital and operational expenditures increases due to the integration of the financial resources of water and wastewater utilities and thus improves the integrated levels of service. In practice, water utilities' stakeholders can use the benchmarking performance indicators and asset management models developed in this research to negotiate and enact meaningful strategic targets and policy levers that lead to the sustainable asset management of the water distribution and wastewater collection networks over the life cycle of assets.
Download or read book Computer Modeling and Simulation of Water Distribution Networks written by W.J. Andres and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Simulation and Control of Urban Wastewater Systems written by Manfred Schütze and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.
Download or read book Advanced Water Distribution Modeling and Management written by Thomas M. Walski and published by . This book was released on 2003 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM includes: a 25-pipe academic version of WaterCAD with stand-alone interface; the WaterCAD files for individual problems; the WaterCAD user manual and an examination booklet for continuing education credits; Adobe Acrobat Reader software for viewing the manual and booklet.
Download or read book Advances in Modeling and Management of Urban Water Networks written by Alberto Campisano and published by MDPI. This book was released on 2021-01-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue on Advances in Modeling and Management of Urban Water Networks (UWNs) explores four important topics of research in the context of UWNs: asset management, modeling of demand and hydraulics, energy recovery, and pipe burst identification and leakage reduction. In the first topic, the multi-objective optimization of interventions on the network is presented to find trade-off solutions between costs and efficiency. In the second topic, methodologies are presented to simulate and predict demand and to simulate network behavior in emergency scenarios. In the third topic, a methodology is presented for the multi-objective optimization of pump-as-turbine (PAT) installation sites in transmission mains. In the fourth topic, methodologies for pipe burst identification and leakage reduction are presented. As for the urban drainage systems (UDSs), the two explored topics are asset management, with a system upgrade to reduce flooding, and modeling of flow and water quality, with analyses on the transition from surface to pressurized flow, impact of water use reduction on the operation of UDSs, and sediment transport in pressurized pipes. The Special Issue also includes one paper dealing with the hydraulic modeling of an urban river with a complex cross-section.
Download or read book Stochastic Water Demand Modelling written by Mirjam Blokker and published by IWA Publishing. This book was released on 2011-09-19 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water quality processes in the drinking water distribution network are strongly influenced by the flow velocity and residence time of the water in the network. In order to understand how the water quality changes in the drinking water distribution network, a good understanding of hydraulics is required. Specifically in the periphery of the network, where customers are connected, the hydraulics can change rapidly. During the night time the water is almost stagnant and the residence time increases. In the morning, when everybody gets up and flushes the toilet and takes a shower, high flow velocities can occur. During the remainder of the day flow velocities are low. The stochastic endues model SIMDEUM was developed to simulate water use on a small time scale (1 s) and small spatial scale (per fixture). SIMDEUM enables a good model of flow velocities, residence times and the connected water quality processes in the water distribution network. Stochastic Water Demand Modelling: Hydraulics in Water Distribution Networks describes the requirements of hydraulics in water quality modelling and provides insight into the development of detailed residential and non-residential water demand models. The book illustrates the use of detailed demand models in water quality models with respect to the variation in residence times and the relation with particle accumulation and resuspension. The models are compared to measurements in several real drinking water distribution networks.
Download or read book Urban Hydroinformatics written by Roland K. Price and published by IWA Publishing. This book was released on 2011 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to hydroinformatics applied to urban water management. It shows how to make the best use of information and communication technologies for manipulating information to manage water in the urban environment. The book covers the acquisition and analysis of data from urban water systems to instantiate mathematical models or calculations, which describe identified physical processes. The models are operated within prescribed management procedures to inform decision makers, who are responsible to recognized stakeholders. The application is to the major components of the urban water environment, namely water supply, treatment and distribution, wastewater and stormwater collection, treatment and impact on receiving waters, and groundwater and urban flooding. Urban Hydroinformatics pays particular attention to modeling, decision support through procedures, economics and management, and implementation in both developed and developing countries. The book is written with post-graduates, researchers and practicing engineers who are involved in urban water management and want to improve the scope and reliability of their systems.
Download or read book Modeling Analysis and Design of Water Distribution Systems written by Lee Cesario and published by . This book was released on 1995 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance in Water Distribution written by Sérgio Teixeira Coelho and published by Taylor & Francis Group. This book was released on 1997 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Water Quality in Distribution Systems written by Robert Maurice Clark and published by Amer Water Works Assn. This book was released on 2012 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rev. ed. of: Modeling water quality in drinking water distribution systems / Robert M. Clark, Walter M. Grayman. 1998.
Download or read book Computer Modeling of Water Distribution Systems written by American Water Works Association and published by . This book was released on 2005 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated from the 1989 version, this manual presents the basics of computerized programs and processes for control and maintenance of a water distribution system. Discussed are operational functions that should be included, how systems should be designed and organized and what operators should be aware of to integrate new data into current systems.
Download or read book Integrating Water Systems written by Joby Boxall and published by CRC Press. This book was released on 2009-07-24 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of articles by leading international experts on modeling and control of potable water distribution and sewerage collection systems, focusing on advances in sensors, instrumentation and communications technologies; assessment of sensor reliability, accuracy and fitness; data management including SCADA and GIS; systems modelling, optimisation and decision support; real time monitoring, modelling control and associated uncertainties; water quality, water and wastewater treatment modeling; demand forecasting, leakage and energy management; asset management and performance modeling; sustainable urban water management including flooding issues; security, reliability and resilience of water systems; likely impacts of climate change; Water scarcity and intermittent supply. Intended for water researchers in industry and academia.
Download or read book Handbook of Water and Wastewater Systems Protection written by Robert M. Clark and published by Springer Science & Business Media. This book was released on 2011-09-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the events of 9/11, the Administrator of the US Environmental Protection Agency created the Water Protection Task Force (WPTF), which identified water and wastewater systems as a major area of vulnerability to deliberate attack. The WPTF suggested that there are steps that can be taken to reduce these vulnerabilities and to make it as difficult as possible for potential saboteurs to succeed. The WPTF recommended that be scrutinized with renewed vigor to secure water and wastewater systems against these possible threats. It also recommended that water and wastewater systems have a response plan in place in the event an act of terrorism occurs. The WPTF identified water distribution networks as an area of special vulnerability and highlighted the need for rapid on-line detection methods that are accurate and have a wide detection range. As a result of these recommendations novel technologies from various fields of science and engineering are now addressing water security issues and water and wastewater utilities are looking for innovative solutions. Once such technologies are available, there will be a rapid implementation process that will present many business opportunities for the private sector. However, in addition to terrorist threats water and wastewater systems are inherently vulnerable to natural disasters such as earthquakes and floods. This volume will address the problems associated with both intended terrorist attacks and natural disasters affecting water or wastewater systems. The book is divided into parts based on the kinds of threats facing water and wastewater systems: (1) a direct attack on water and wastewater infrastructure storage reservoirs, and distribution and collection networks; (2) a cyber attack disabling the functionality of the water and wastewater systems or taking over control of key components which might result in system failures; and (3) a deliberate chemical or biological contaminant injection at one of the water distribution system’s nodes. It will examine unique plans, technological and managerial innovations for protecting such systems, and includes descriptions of projects that were implemented to respond to natural disasters. Case studies are presented that discuss existing projects and evaluate their performance, with an emphasis on providing guidelines and techniques that can be implemented by water and wastewater planners and managers to deal with natural and manmade disasters should they occur.
Download or read book Wastewater Treatment Process Modeling Second Edition MOP31 written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2013-09-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Complete, Up-to-Date Guide to Process Modeling Methods and Protocols Fully revised to cover the latest advances in the field, Wastewater Treatment Process Modeling, Second Edition, explains general modeling concepts and terminology and offers practical details on how to use process models for the design and operation of small, medium, and large water resource recovery facilities. This Water Environment Federation manual describes each step of the modeling process, including the fundamental math required, overviews of existing models and when to use them, modeling protocols, and how to interpret data. The detailed information in this authoritative volume helps to ensure that process models are developed, used, and documented correctly. Coverage includes: History of process modeling Modeling fundamentals Unit process model descriptions Process modeling tools Dedicated experiments and tools Overview of available modeling and simulation protocols Project definition Building a facility model Using models for design, optimization, and control
Download or read book Impounded Water Bodies Modelling and Simulation written by Salisu Dan’azumi and published by Xlibris Corporation. This book was released on 2014-05-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enhances knowledge on Impounded Water Bodies (IWB) systems of the interested parties. They include academicians, scholars, scientist, researchers, engineers, undergraduate and postgraduate students. Specifically this book is valuable for everyone involved in water, hydrology, environment, civil engineering and other related disciplines. This book emphasized modelling and simulation of IWB particularly; Reservoir and Detention Pond, in relation to the two major hydrological problems; Flood and Water Pollution. The knowledge presented is useful for hydrological systems real phenomenon replication and prediction. This book also provides IWB general overview, in terms of the preliminary and state of the art analysis which may trigger the interest for further research and investigations. The IWB related factors were integrated to provide the quantitative framework, alternative approaches and valuable outcomes that lead to worthy policy establishment. This book covers topic related to nutrient (phosphorus) loadings estimation using the new version of Event-Based Stochastic Model in reservoir systems. The detention pond systems modelling using Analytical Probabilistic Models (APM) and the optimization of detention time using Particle Swarm Optimization (PSO) are elaborated. It is hoped that the book provides useful knowledge in pursuit of the IWB sustainable development. Dr Supiah Shamsudin is an Associate Professor in Water Resources and Hydrology at the Razak School of Engineering and Advanced Technology, Universiti Teknologi Malaysia - Kuala Lumpur, Malaysia. She obtained Bachelor of Science (Civil Engineering) from University of Miami, USA and Master of Science (Hydrology and Water resources) from University of Nebraska - Lincoln, USA. She later obtained Doctor of Philosophy (PhD) in Civil Engineering from Universiti Teknologi Malaysia in 2003. Her main specialization is Impounded Water Bodies Engineering and Management. Her research interest include intelligent detention pond design, watershed and reservoir management under uncertain environment, environmental hydrology, reservoir eutrophication, fuzzy and risk related approaches and multicriteria decision support for water resources systems. She had extensive involvements in international peer reviewed indexed journal publications and presented at many national and international conferences. Dr Salisu Danazumi is currently a Senior Lecturer in the Department of Civil Engineering, Bayero University Kano - Nigeria. He holds a Bachelors degree (Civil Engineering) and Masters degree (Water Resources and Environmental Engineering) from Bayero University Kano - Nigeria in 1998 and 2006 respectively. He obtained a PhD degree in Hydrology from Universiti Teknologi Malaysia in 2012. His research interest include: multi-objective optimization of water resource systems using particle swarm optimization, risk and uncertainty analysis and surface water quality modelling. He has authored and co-authored many papers in international peer reviewed journals and conferences.
Download or read book Sustainable Municipal Water and Wastewater Management Using System Dynamics written by Rashid Rehan and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall goal of this research is to develop an integrated system dynamics framework for sustainable management of municipal water and wastewater systems. Canadian municipalities have traditionally relied on grants received from senior levels of government to finance construction of water supply and wastewater collection infrastructure. User fees for water and wastewater services were determined so as to recover only the operating expenditures with no allowance to recoup the capital costs of infrastructure. As the infrastructure assets started approaching the end of their service life, investments needed to rehabilitate these assets were deferred in the expectation of receiving further grants for this purpose. Hence, a significant backlog of deteriorated infrastructure has accumulated over the years. Recently enacted regulations require that all expenditures incurred on provision of water and wastewater services should ultimately be financed from user fee based revenues. Another piece of legislation provides for establishment of service performance standards. Urban water and wastewater systems involve interconnections among physical infrastructure, financial, and socio-political factors. Several interacting feedback loops are formed due to these interconnections and render the management of water and wastewater infrastructure as a complex, dynamic problem. Existing asset management tools in the literature are found inadequate to capture the influence of feedback loops. A novel system dynamics approach is used to develop a demonstration model for water and wastewater network management. Model results for a case study show significance of feedback loops for financial sustainability of the system. For example, user fees have to be substantially increased to achieve financial sustainability, especially when price elasticity of water demand is considered. A detailed causal loop diagram for management of wastewater collection networks is presented. The causal loop diagram lays out qualitative causal relationships among system components and identifies multiple interacting feedback loops. Based on this causal loop diagram, a system dynamics model comprised of a wastewater pipes sector, a finance sector, and a consumers sector, is developed. Policy levers are included in the model to facilitate formulation of different financing and rehabilitation strategies for the wastewater collection network. Financial and service performance indicators included in the model allow comparison of different financing and rehabilitation strategies. Data requirements for implementation of the model are discussed. The wastewater collection network model is implemented for a case study of a medium-sized Canadian municipality with a substantial backlog of deteriorated pipes. A methodology for parameterization of the model using existing data sources is presented. Simulation results indicate that different financing strategies ranging from no borrowing to full utilization of debt capacity can achieve similar total life-cycle costs but with significantly varying impacts for consumers in terms of service performance and financial burden. A detailed causal loop diagram for management of a watermain distribution network is employed to identify feedback loops. The causal loop diagram is then developed into a system dynamics model comprised of watermain pipes, financial, and consumer sectors. Data requirements for implementation of the model are discussed.
Download or read book Drinking water Distribution Sewage and Rainfall Collection written by François G. Brière and published by Presses inter Polytechnique. This book was released on 1999 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is aimed at professors and students of civil engineering and at practising engineers and technicians in consulting firms and municipalities. It offers engineers and technicians in civil engineering modern tools and means to design water conduits with adequate capacity and to select materials and equipment that meet the needs of the population and of industrial and business communities. Each chapter features complete examples along with a set of exercises at the end. Answers are provided at the back of the book.
