Download or read book PC BASED INSTRUMENTATION written by N. MATHIVANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2007-01-21 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-organized book is intended for the undergraduate students of Electrical, Electronics and Communications, Computer, Instrumentation and Instrumentation and Control Engineering; and postgraduate students of science in Electronics, Physics and Instrumentation. Data acquisition being the core of all PC-based measurements and control instrumentation systems engineering, this book presents detailed discussions on PC bus based data acquisition, remote data acquisition, GPIB data acquisition and networked data acquisition configurations. This book also describes sensors, signal-conditioning and principles of PC-based data acquisition. It provides several latest and advanced techniques. This book stresses the need for understanding the use of Personal Computers in measurement and control instrumentation applications. KEY FEATURES : • Provides several laboratory experiments to help the readers to gain hands-on experience in PC-based measurement and control. • Provides a number of review questions/problems (with solutions to the odd numbered problems) and objective type questions with solutions. • Presents a number of working circuits, design and programming examples. • Presents comparison of properties, features and characteristics of different bus systems, interface standards, and network protocols. • Includes the advanced techniques such as sigma–delta converter, RS-485, I2C bus, SPI bus, FireWire, IEEE-488.2, SCPI and Fieldbus standards.
Download or read book PC Based Instrumentation and Control written by Mike Tooley and published by Routledge. This book was released on 2013-06-17 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book PC Based Instrumentation and Control written by Michael H. Tooley and published by Routledge. This book was released on 2005 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Save money and increase efficiency by using a standard PC platform to solve a wide variety of control, instrumentation and measurement problems . Designed for practicing engineers and technicians, this book is also ideal for educational courses in control, instrumentation and measurement . A companion website provides downloadable executables, source code, links to manufacturers and suppliers, and additional reference material PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the most popular computer languages. Numerous sample applications, complete with examples of working circuits and representative software, make this a practical, hands-on guide to implementing a vast range of PC-based testing, measurement, and control systems. Advice is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, an expanded chapter on reliability and fault-finding, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book Modern Instrumentation written by G Silverman and published by CRC Press. This book was released on 1995-01-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern science and engineering relies heavily on understanding computer hardware and software in order to make effective use of these tools in the laboratory and industrial environments. The authors of Modern Instrumentation: A Computer Approach have succeeded in producing a highly readable source that will serve both newcomers to the field as well as experienced professionals. Including both fundamentals and applications, the book first describes the role of the computer in instrument systems and provides numerous practical examples. The second part of the book explores specific software packages and their capabilities for applications such as, instrument design and simulation, data acquisition, data processing, and the potential of artificial intelligence in instrument design. Because of the full integration of theory with practical applications of leading software packages, this book is an extremely useful reference for those who use computer-based instrument technology for data acquisition and who are involved with hardware or software development for laboratory and process control.
Download or read book Real World Instrumentation with Python written by John M. Hughes and published by "O'Reilly Media, Inc.". This book was released on 2010-11-15 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to develop your own applications to monitor or control instrumentation hardware. Whether you need to acquire data from a device or automate its functions, this practical book shows you how to use Python's rapid development capabilities to build interfaces that include everything from software to wiring. You get step-by-step instructions, clear examples, and hands-on tips for interfacing a PC to a variety of devices. Use the book's hardware survey to identify the interface type for your particular device, and then follow detailed examples to develop an interface with Python and C. Organized by interface type, data processing activities, and user interface implementations, this book is for anyone who works with instrumentation, robotics, data acquisition, or process control. Understand how to define the scope of an application and determine the algorithms necessary, and why it's important Learn how to use industry-standard interfaces such as RS-232, RS-485, and GPIB Create low-level extension modules in C to interface Python with a variety of hardware and test instruments Explore the console, curses, TkInter, and wxPython for graphical and text-based user interfaces Use open source software tools and libraries to reduce costs and avoid implementing functionality from scratch
Download or read book PC Based Instrumentation and Control written by Mike Tooley and published by Taylor & Francis. This book was released on 2013-06-17 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: PC Based Instrumentation and Control is a guide to implementing computer control, instrumentation and data acquisition using a standard PC and some of the more traditional computer languages. Numerous examples of configurations and working circuits, as well as representative software, make this a practical, hands-on guide to implementing PC-based testing and calibration systems and increasing efficiency without compromising quality or reliability. Guidance is given on modifying the circuits and software routines to meet the reader's specific needs. The third edition includes updated coverage of PC hardware and bus systems, a new chapter on virtual instruments and an introduction to programming and software development in a modern 32-bit environment. Additional examples have been included, with source code and executables available for download from the companion website www.key2control.com.
Download or read book PC based Instrumentation and Control written by Michael H. Tooley and published by Butterworth-Heinemann. This book was released on 1991 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing WMI Solutions written by Craig Tunstall and published by Addison-Wesley Professional. This book was released on 2003 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: PLEASE PROVIDE SUMMARY
Download or read book Practical Data Acquisition for Instrumentation and Control Systems written by John Park and published by Newnes. This book was released on 2003-07-28 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Data Acquisition & Control; Analog and Digital Signals; Signal Conditioning; The Personal Computer for Real Time Work; Plug-in Data Acquisition Boards; Serial Data Communications; Distributed & Standalone Loggers/Controllers; IEEE 488 Standard; Ethernet & LAN Systems; The Universal Serial Bus (USB); Specific Techniques; The PCMCIA Card; Appendix A: Glossary; Appendix B: IBM PC Bus Specifications; Appendix C: Review of the Intel 8255 PPI Chip; Appendix D: Review of the Intel 8254 Timer-Counter Chip; Appendix E: Thermocouple Tables; Appendix F: Numbers Systems; Appendix G: GPIB (IEEE-488) Mnemonics & their Definition; Appendix H: Practical Laboratories & Demonstrations; Appendix I: Command Structure & Programming.
Download or read book Measurement and Instrumentation written by Alan S. Morris and published by Academic Press. This book was released on 2011-09-12 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement and Instrumentation introduces undergraduate engineering students to the measurement principles and the range of sensors and instruments that are used for measuring physical variables. Based on Morris's Measurement and Instrumentation Principles, this brand new text has been fully updated with coverage of the latest developments in such measurement technologies as smart sensors, intelligent instruments, microsensors, digital recorders and displays and interfaces. Clearly and comprehensively written, this textbook provides students with the knowledge and tools, including examples in LABVIEW, to design and build measurement systems for virtually any engineering application. The text features chapters on data acquisition and signal processing with LabVIEW from Dr. Reza Langari, Professor of Mechanical Engineering at Texas A&M University. Early coverage of measurement system design provides students with a better framework for understanding the importance of studying measurement and instrumentation Includes significant material on data acquisition, coverage of sampling theory and linkage to acquisition/processing software, providing students with a more modern approach to the subject matter, in line with actual data acquisition and instrumentation techniques now used in industry. Extensive coverage of uncertainty (inaccuracy) aids students' ability to determine the precision of instruments Integrated use of LabVIEW examples and problems enhances students' ability to understand and retain content
Download or read book PC based Instrumentation and Control written by Michael H. Tooley and published by Newnes. This book was released on 1995-03-03 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains, using real, working, proven circuit examples, how to select and configure a control system based on readily available software and hardware. Representative software routines in a variety of languages (including 8086 assembler, BASIC and C) are in
Download or read book Synthetic Instruments Concepts and Applications written by Chris Nadovich and published by Elsevier. This book was released on 2004-09-09 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The way electronic instruments are built is changing in a deeply fundamental way. It is making an evolutionary leap to a new method of design that is being called synthetic instruments. This new method promises to be the most significant advance in electronic test and instrumentation since the introduction of automated test equipment (ATE). The switch to synthetic instruments is beginning now, and it will profoundly affect all test and measurement equipment that will be developed in the future. Synthetic instruments are like ordinary instruments in that they are specific to a particular measurement or test. They might be a voltmeter that measures voltage, or a spectrum analyzer that measures spectra. The key, defining difference is this: synthetic instruments are implemented purely in software that runs on general purpose, non-specific measurement hardware with a high speed A/D and D/A at its core. In a synthetic instrument, the software is specific; the hardware is generic. Therefore, the "personality" of a synthetic instrument can be changed in an instant. A voltmeter may be a spectrum analyzer a few seconds later, and then become a power meter, or network analyzer, or oscilloscope. Totally different instruments are implemented on the same hardware and can be switched back and forth in the blink of an eye. This book explains the basics of synthetic instrumentation for the many people that will need to quickly learn about this revolutionary way to design test equipment. This book attempts to demystify the topic, cutting through, commercial hype, and obscure, vague jargon, to get to the heart of the technique. It reveals the important basic underlying concepts, showing people how the synthetic instrument design approach, properly executed, is so effective in creating nstrumentation that out performs traditional approaches to T&M and ATE being used today. - provides an overview and complete introduction to this revolutionary new technology - enables equipment designers and manufacturers to produce vastly more functional and flexible instrumentation; it's not your father's multimeter!
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2005-06-28 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of instrumentation is critical in light of the highly sensitive and precise requirements of modern processes and systems. Rapid development in instrumentation technology coupled with the adoption of new standards makes a firm, up-to-date foundation of knowledge more important than ever in most science and engineering fields. Understanding this, Robert B. Northrop produced the best-selling Introduction to Instrumentation and Measurements in 1997. The second edition continues to provide in-depth coverage of a wide array of modern instrumentation and measurement topics, updated to reflect advances in the field. See What's New in the Second Edition: Anderson Current Loop technology Design of optical polarimeters and their applications Photonic measurements with photomultipliers and channel-plate photon sensors Sensing of gas-phase analytes (electronic "noses") Using the Sagnac effect to measure vehicle angular velocity Micromachined, vibrating mass, and vibrating disk rate gyros Analysis of the Humphrey air jet gyro Micromachined IC accelerometers GPS and modifications made to improve accuracy Substance detection using photons Sections on dithering, delta-sigma ADCs, data acquisition cards, the USB, and virtual instruments and PXI systems Based on Northrop's 40 years of experience, Introduction to Instrumentation and Measurements, Second Edition is unequalled in its depth and breadth of coverage.
Download or read book Pocket Guide to Instrumentation written by R. R. Lee and published by Gulf Professional Publishing. This book was released on 1999-03-11 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy guide helps readers quickly identify instrumentation. It includes data on control devices, monitors, and batteries, and a chapter on bar coding as a control procedure. Pocket Guide to Instrumentation is a handy guide that helps simplify procurement and handling of instrumentation equipment and accessories. It provides materials personnel with concise, straightforward information for identifying and tracking the many types of control devices, fittings, valves, etc. that accompany instrumentation projects. It also includes data on cables, monitors, and batteries, and a chapter on how to use bar coding as a control procedure. Ideal for engineers, designers, and technical and clerical personnel involved in material procurement and control, this compact reference is packed with figures and tables that describe a wide range of standard instrumentation items. Ideal for engineers, designers, and technical and clerical personnel involved in material procurement and control, this compact reference is packed with figures and tables that describe a wide range of standard instrumentation items.
Download or read book Data Acquisition Techniques Using PC written by Howard Austerlitz and published by Academic Press. This book was released on 1991-10-10 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data Acquisition Techniques Using Personal Computers contains all the information required by a technical professional (engineer, scientist, technician) to implement a PC-based acquisition system. Including both basic tutorial information as well as some advanced topics, this work is suitable as a reference book for engineers or as a supplemental text for engineering students. It gives the reader enough understanding of the topics to implement a data acquisition system based on commercial products. A reader can alternatively learn how to custom build hardware or write his or her own software. Featuring diverse information, this book will be useful to both the technical professional and the hobbyist.
Download or read book Introduction to Instrumentation and Measurements written by Robert B. Northrop and published by CRC Press. This book was released on 2018-09-03 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weighing in on the growth of innovative technologies, the adoption of new standards, and the lack of educational development as it relates to current and emerging applications, the third edition of Introduction to Instrumentation and Measurements uses the authors’ 40 years of teaching experience to expound on the theory, science, and art of modern instrumentation and measurements (I&M). What’s New in This Edition: This edition includes material on modern integrated circuit (IC) and photonic sensors, micro-electro-mechanical (MEM) and nano-electro-mechanical (NEM) sensors, chemical and radiation sensors, signal conditioning, noise, data interfaces, and basic digital signal processing (DSP), and upgrades every chapter with the latest advancements. It contains new material on the designs of micro-electro-mechanical (MEMS) sensors, adds two new chapters on wireless instrumentation and microsensors, and incorporates extensive biomedical examples and problems. Containing 13 chapters, this third edition: Describes sensor dynamics, signal conditioning, and data display and storage Focuses on means of conditioning the analog outputs of various sensors Considers noise and coherent interference in measurements in depth Covers the traditional topics of DC null methods of measurement and AC null measurements Examines Wheatstone and Kelvin bridges and potentiometers Explores the major AC bridges used to measure inductance, Q, capacitance, and D Presents a survey of sensor mechanisms Includes a description and analysis of sensors based on the giant magnetoresistive effect (GMR) and the anisotropic magnetoresistive (AMR) effect Provides a detailed analysis of mechanical gyroscopes, clinometers, and accelerometers Contains the classic means of measuring electrical quantities Examines digital interfaces in measurement systems Defines digital signal conditioning in instrumentation Addresses solid-state chemical microsensors and wireless instrumentation Introduces mechanical microsensors (MEMS and NEMS) Details examples of the design of measurement systems Introduction to Instrumentation and Measurements is written with practicing engineers and scientists in mind, and is intended to be used in a classroom course or as a reference. It is assumed that the reader has taken core EE curriculum courses or their equivalents.
Download or read book Instrumentation and Control Systems written by William Bolton and published by Elsevier. This book was released on 2004-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a clear and readable style, Bill Bolton addresses the basic principles of modern instrumentation and control systems, including examples of the latest devices, techniques and applications. Unlike the majority of books in this field, only a minimal prior knowledge of mathematical methods is assumed. The book focuses on providing a comprehensive introduction to the subject, with Laplace presented in a simple and easily accessible form, complimented by an outline of the mathematics that would be required to progress to more advanced levels of study.Taking a highly practical approach, Bill Bolton combines underpinning theory with numerous case studies and applications throughout, to enable the reader to apply the content directly to real-world engineering contexts. Coverage includes smart instrumentation, DAQ, crucial health and safety considerations, and practical issues such as noise reduction, maintenance and testing. An introduction to PLCs and ladder programming is incorporated in the text, as well as new information introducing the various software programmes used for simulation.Problems with a full answer section are also included, to aid the reader's self-assessment and learning, and a companion website (for lecturers only) at http://textbooks.elsevier.com features an Instructor's Manual including multiple choice questions, further assignments with detailed solutions, as well as additional teaching resources.The overall approach of this book makes it an ideal text for all introductory level undergraduate courses in control engineering and instrumentation. It is fully in line with latest syllabus requirements, and also covers, in full, the requirements of the Instrumentation & Control Principles and Control Systems & Automation units of the new Higher National Engineering syllabus from Edexcel.* Assumes minimal prior mathematical knowledge, creating a highly accessible student-centred text* Problems, case studies and applications included throughout, with a full set of answers at the back of the book, to aid student learning, and place theory in real-world engineering contexts* Free online lecturer resources featuring supporting notes, multiple-choice tests, lecturer handouts and further assignments and solutions
