Download or read book Passive Micromixers written by Kwang-Yong Kim and published by MDPI. This book was released on 2018-08-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Passive Micromixers" that was published in Micromachines
Download or read book Micro Process Engineering 3 Volume Set written by Volker Hessel and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume handbook provides an overview of the key aspects of micro process engineering. Volume 1 covers the fundamentals, operations and catalysts, volume 2 examines devices, reactions and applications, with volume 3 rounding off the trilogy with system, process and plant engineering. Fluid dynamics, mixing, heat/mass transfer, purification and separation microstructured devices and microstructured reactors are explained in the first volume. Volume 2 segments microreactor design, fabrication and assembly, bulk and fine chemistry, polymerisation, fuel processing and functional materials into understandable parts. The final volume of the handbook addresses microreactor systems design and scale-up, sensing, analysis and control, chemical process engineering, economic and eco-efficiency analyses as well as microreactor plant case studies in one book. Together, this 3-volume handbook explains the science behind micro process engineering to the scale-up and their real life industrial applications.
Download or read book Analysis and Design Optimization of Micromixers written by Arshad Afzal and published by Springer Nature. This book was released on 2020-12-07 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the computational framework based on knowledge of flow and mass transfer together with optimization techniques to solve problems relevant to micromixing technology. The authors provide a detailed analysis of the different numerical techniques applied to the design of micromixers. Flow and mixing analysis is based on both the Eulerian and Lagrangian approaches; relative advantages and disadvantages of the two methods and suitability to different types of mixing problems are analysed. The book also discusses the various facets of numerical schemes subjected to discretization errors and computational grid requirements. Since a large number of studies are based on commercial computational fluid dynamics (CFD) packages, relevant details of these packages to the mixing problem using them are presented. Numerical optimization techniques coupled with CFD analysis of flow and mixing have proved to be an important tool for micromixers design, and therefore, are an important part of the book. These techniques are presented briefly, and focus is on surrogate modeling and optimization applied to design of micromixers.
Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-10-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- Fundamentals of Mass Transport in Micro Scale -- Fabrication Technologies -- Micromixers Based on Molecular Diffusion -- Micromixers Based on Chaotic Advection -- Active Micromixers -- Characterization Techniques -- Applications of Micromixers.
Download or read book Micro Total Analysis Systems 2001 written by J. Michael Ramsey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Conference on Micro Total Analysis Systems, also known as JlTAS 2001, will highlight the latest exciting events in the world ofminiaturized devices and systems for performing chemical and biochemical experimentation This conference has become mandatory for those of us working in this field as it is indeed helping to define our discipline. We are grateful to the people of the MESA Research Institute of the University of Twente, particularly Piet Bergveld and Albert van den Berg, for starting this meeting in 1994. Their original intention was for the JlTAS meeting to be a small informal workshop. This workshop flavor was sustained through the second meeting held in Basel in 1996, but already in 1998 at the third meeting in Banff it was clear that the "workshop" had become a conference with 420 attendees. It was due to this clearly growing interest in microchemical systems that it was decided we should consider gradually moving toward an annual format and prepare for the possibility that the meeting would increase in popularity. Albert van den Berg was still yearning for a workshop at the JlTAS 2000 meeting and planned a single session format. Again there was a large increase in submitted abstracts (more than 230 total) and a further increase in attendance. The JlTAS steering committee again agreed that we would have to prepare to address the demand the meeting was receiving.
Download or read book Fundamentals and Applications of Microfluidics Third Edition written by Nam-Trung Nguyen and published by Artech House. This book was released on 2019-01-31 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, the Artech House bestseller, Fundamentals and Applications of Microfluidics, provides engineers and students with the most complete and current coverage of this cutting-edge field. This revised and expanded edition provides updated discussions throughout and features critical new material on microfluidic power sources, sensors, cell separation, organ-on-chip and drug delivery systems, 3D culture devices, droplet-based chemical synthesis, paper-based microfluidics for point-of-care, ion concentration polarization, micro-optofluidics and micro-magnetofluidics. The book shows how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. Readers find discussions on a wide range of applications, including fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. Professionals get practical guidance in choosing the best fabrication and enabling technology for a specific microfluidic application, and learn how to design a microfluidic device. Moreover, engineers get simple calculations, ready-to-use data tables, and rules of thumb that help them make design decisions and determine device characteristics quickly.
Download or read book Micro Nano Technology Systems for Biomedical Applications written by Chih-Ming Ho and published by Oxford University Press. This book was released on 2010-03-25 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: In daily life, we are accustomed to working with length scales of feet or meters, but the building blocks from which our bodies are constructed are many orders of magnitude smaller. The technologies that are being developed to intervene at these minute scales have the potential to improve human health and significantly enrich our lives. Revolutionary micro/nano technology platforms have led to dramatic advances in sample preparation, analysis and cell culture. From the 1990s through to the very beginning of the twenty-first century, the focus was on the development of manufacturing technologies. Through elegant design and sophisticated fabrication, the micro- to nano-scale manipulation of fluids and particles has become routine. Since then, it has become possible to control molecular interactions at device surfaces, and optical manipulation, imaging and sensing techniques can also be incorporated. Micro/nano technology platforms are already being used to study and direct biological processes at the cellular and sub-cellular level, and to detect disease with greater sensitivity and specificity. The challenges and excitement in the near future will be in engineering these sophisticated, multifunctional devices to seamlessly interface with complex biological systems. Providing a clear guide that moves from molecules through devices to systems, this book reviews fundamental aspects of microfluidic devices, including fabrication, surface property control, pressure-driven and electrokinetic flow, and functions such as fluid mixing, particle sorting and molecular separations. The integration of optical and plasmonic imaging, optoelectronic tweezers for single particle manipulation, and optical and electrical signal transduction methods for biosensing are shown to provide extraordinary capabilities for bioanalytical and biomedical applications. These represent key areas of research that will lead to the next generation of micro/nano-based systems. Anyone working in this fast-changing field will benefit from this comprehensive review of the latest thinking, while researchers will find much to inspire and direct their work.
Download or read book Optical Nano and Micro Actuator Technology written by George K. Knopf and published by CRC Press. This book was released on 2017-12-19 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Optical Nano and Micro Actuator Technology, leading engineers, material scientists, chemists, physicists, laser scientists, and manufacturing specialists offer an in-depth, wide-ranging look at the fundamental and unique characteristics of light-driven optical actuators. They discuss how light can initiate physical movement and control a variety of mechanisms that perform mechanical work at the micro- and nanoscale. The book begins with the scientific background necessary for understanding light-driven systems, discussing the nature of light and the interaction between light and NEMS/MEMS devices. It then covers innovative optical actuator technologies that have been developed for many applications. The book examines photoresponsive materials that enable the design of optically driven structures and mechanisms and describes specific light-driven technologies that permit the manipulation of micro- and nanoscale objects. It also explores applications in optofluidics, bioMEMS and biophotonics, medical device design, and micromachine control. Inspiring the next generation of scientists and engineers to advance light-driven technologies, this book gives readers a solid grounding in this emerging interdisciplinary area. It thoroughly explains the scientific language and fundamental principles, provides a holistic view of optical nano and micro actuator systems, and illustrates current and potential applications of light-driven systems.
Download or read book Microfluidic Biosensors written by Wing Cheung Mak and published by Elsevier. This book was released on 2022-11-05 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidic Biosensors provides a comprehensive overview covering the most recent emerging technologies on the design, fabrication, and integration of microfluidics with transducers. These form various integrated microfluidic biosensors with device configurations ranging from 2D to 4D levels. Coverage also includes advanced printed microfluidic biosensors, flexible microfluidics for wearable biosensors, autonomous lab-on-a-chip biosensors, CMOS-base microanalysis systems, and microfluidic devices for mobile phone biosensing. The editors and contributors of this book represent both academia and industry, come from a varied range of backgrounds, and offer a global perspective. This book discusses the design and principle of microfluidic systems and uses them for biosensing applications. The microfluidic fabrication technologies covered in this book provide an up-to-date view, allowing the community to think of new ways to overcome challenges faced in this field. The focus is on existing and emerging technologies not currently being analyzed extensively elsewhere, providing a unique perspective and much-needed content. The editors have crafted this book to be accessible to all levels of academics from graduate students, researchers, and professors working in the fields of biosensors, microfluidics design, material science, analytical chemistry, biomedical devices, and biomedical engineering. It can also be useful for industry professionals working for microfluidic device manufacturers, or in the industry of biosensors and biomedical devices. Presents an in-depth overview of microfluidic biosensors and associated emerging technologies such as printed microfluidics and novel transducers Addresses a range of microfluidic biosensors with device configurations ranging from 2D to 4D levels Includes the commercialization aspects of microfluidic biosensors that provide insights for scientists and engineers in research and development
Download or read book Comprehensive Biotechnology written by and published by Newnes. This book was released on 2011-08-26 with total page 5304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Comprehensive Biotechnology, Six Volume Set continues the tradition of the first inclusive work on this dynamic field with up-to-date and essential entries on the principles and practice of biotechnology. The integration of the latest relevant science and industry practice with fundamental biotechnology concepts is presented with entries from internationally recognized world leaders in their given fields. With two volumes covering basic fundamentals, and four volumes of applications, from environmental biotechnology and safety to medical biotechnology and healthcare, this work serves the needs of newcomers as well as established experts combining the latest relevant science and industry practice in a manageable format. It is a multi-authored work, written by experts and vetted by a prestigious advisory board and group of volume editors who are biotechnology innovators and educators with international influence. All six volumes are published at the same time, not as a series; this is not a conventional encyclopedia but a symbiotic integration of brief articles on established topics and longer chapters on new emerging areas. Hyperlinks provide sources of extensive additional related information; material authored and edited by world-renown experts in all aspects of the broad multidisciplinary field of biotechnology Scope and nature of the work are vetted by a prestigious International Advisory Board including three Nobel laureates Each article carries a glossary and a professional summary of the authors indicating their appropriate credentials An extensive index for the entire publication gives a complete list of the many topics treated in the increasingly expanding field
Download or read book Micro Nano Chip Electrokinetics written by Xiangchun Xuan and published by MDPI. This book was released on 2018-07-04 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Micro/Nano-Chip Electrokinetics" that was published in Micromachines
Download or read book Emerging Drug Delivery and Biomedical Engineering Technologies written by Dimitrios Lamprou and published by CRC Press. This book was released on 2023-04-05 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the advances in drug discovery and delivery and the present need for emerging technologies. Throughout the text new micro and nanofabrication techniques are described, including methods such as electrohydrodynamic processes, additive manufacturing, and microfluidics, which have the potential to produce drug delivery systems that were not possible a few years ago. This book is of great use to both entry-level and experienced researchers in the field of emerging technologies for the manufacturing of drug delivery devices. Features: Describes technologies that are significantly enhancing the delivery of drugs and biologics Presents new data on mobile and wearable point-of-care testing systems Features hot topics such as electrospinning, 3D printing and micro-needles Focuses on additive manufacturing (AM) which can be used to provide customized treatment for patients Will appeal to experienced researchers and those considering entering the field of emerging technologies for the manufacturing of drug delivery devises
Download or read book Solid State Physics Fluidics and Analytical Techniques in Micro and Nanotechnology written by Marc J. Madou and published by CRC Press. This book was released on 2011-06-13 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a clear theoretical understanding of MEMS and NEMS, Solid-State Physics, Fluidics, and Analytical Techniques in Micro- and Nanotechnology focuses on nanotechnology and the science behind it, including solid-state physics. It provides a clear understanding of the electronic, mechanical, and optical properties of solids relied on in integra
Download or read book Advances in Modelling and Optimization of Manufacturing and Industrial Systems written by Ravi Pratap Singh and published by Springer Nature. This book was released on 2023-03-01 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 2nd International Conference on Industrial and Manufacturing Systems (CIMS 2021) and discusses the applications of soft computing, modelling and optimization practices in industrial and manufacturing systems. Various topics covered in this book include advanced machining methods and performances, industrial operations, processing with hybrid manufacturing techniques, fabrication and developments in micro-machining and its applications, practical issues in supply chain, micro-structure analysis, additive manufacturing processes, reliability and system analysis, material science and metallurgical behaviour analysis, product design and development, etc. The book will be a valuable reference for beginners, researchers, and professionals interested in the modelling, optimization and soft computing related aspects of industrial and production engineering and its allied domains.
Download or read book Bio MEMS written by Wanjun Wang and published by CRC Press. This book was released on 2006-12-15 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book considers both the unique characteristics of biological samples and the challenges of microscale engineering. Divided into three main sections, it first examines fabrication technologies using non-silicon processes, which are suitable for the materials more commonly used in medical/biological analyses. These include UV lithography, LIGA, nanoimprinting, and hot embossing. Attention then shifts to microfluidic components and sensing technologies for sample preparation, delivery, and analysis in microchannels and microchambers. The final section outlines various applications and systems at the leading edge of Bio-MEMS technology in a variety of areas such as drug delivery and proteomics.
Download or read book Methods in Bioengineering written by Jeffrey D. Zahn and published by Artech House. This book was released on 2009-10 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written and edited by recognized experts in the field, the new Artech House Methods in Bioengineering series offers detailed guidance on authoritative methods for addressing specific bioengineering challenges. Offering a highly practical presentation of each topic, each book provides research engineers, scientists, and students with step-by-step procedures, clear examples, and effective ways to overcome problems that may be encountered. This unique volume presents leading-edge microfluidics methods used to handle, manipulate, and analyze cells, particles biological components (e.g., proteins and DNA) for microdiagnostics.
Download or read book Micro Process Engineering written by Norbert Kockmann and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of 'Micro Process Engineering' was originally published in the successful series 'Advanced Micro & Nanosystems'. Authors from leading industrial players and research institutions present a concise and didactical introduction to Micro Process Engineering, the combination of microtechnology and process engineering into a most promising and powerful tool for revolutionizing chemical processes and industrial mass production of bulk materials, fine chemicals, pharmaceuticals and many other products. The book takes the readers from the fundamentals of engineering methods, transport processes, and fluid dynamics to device conception, simulation and modelling, control interfaces and issues of modularity and compatibility. Fabrication strategies and techniques are examined next, focused on the fabrication of suitable microcomponents from various materials such as metals, polymers, silicon, ceramics and glass. The book concludes with actual applications and operational aspects of micro process systems, giving broad coverage to industrial efforts in America, Europe and Asia as well as laboratory equipment and education.
