Download or read book Passive Components and Transmission Systems written by Chongcheng Fan and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passive Components for Circuit Design written by Ian Sinclair and published by Elsevier. This book was released on 2000-11-20 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passive Components for Circuit Design is a unique introduction to this key area of analog electronics designed for technician engineers and anyone involved in circuit design. The coverage encompasses all component types capable of power amplification: resistors, capacitors, transformers, solenoids, motors and transducers. The behaviour of the components is explored along with the different types available and the principles of circuit design. Tolerances, stability, variation with temperature, reliability and manufacturing standards are all covered. Reading this book will improve your skills in component selection and analog circuit design. These are essential skills not only for the analog designer, but for all circuit designers, professional or amateur. Gain a deeper understanding of using passive components Understand the range of components and their applications before designing and specifying Acquire a working knowledge with a minimum of maths
Download or read book The RF Transmission Systems Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2017-12-19 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although it is one of the oldest sectors of electronics and now somewhat taken for granted, radio frequency transmission literally changed our world. Today, it is still the backbone of myriad applications, from broadcasting to electronic counter-measures. The wide variety of hardware in use means that those working in the field must be familiar with a multitude of principles and applications, but finding an up-to-date, comprehensive source for this background material has been difficult, if not impossible. The RF Transmission Systems Handbook addresses the underlying concepts, operation, and maintenance of high-power RF devices, transmission lines, and antennas for broadcast, scientific, and industrial use. Focusing on devices and systems that produce more than one kilowatt of output power, the handbook explores the following major topics: Applications: The common uses of radio frequency energy Fundamental principles: The basic technologies, concepts, and techniques used in RF transmission Power vacuum devices: The principles and applications of gridded vacuum tubes and microwave power devices Solid-state power devices: The operating parameters of semiconductor-based power devices RF components and transmission lines: The operation of hardware used to combine and conduct RF power Antenna systems: The different types of antennas and their basic operating parameters Troubleshooting: Basic troubleshooting techniques and the operation of important test instruments Contrary to the perceptions of many, RF technology remains a dynamic field that continues to advance to higher power levels and higher frequencies. Those who specify, install, and maintain RF equipment will welcome this reference that uniquely serves their needs.
Download or read book Introduction to RF and Microwave Passive Components written by Richard Wallace and published by Artech House. This book was released on 2015-08-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative new resource provides an overview and introduction to working with RF, microwave, and high frequency components. From transmission lines, antennas, millimeter waves, ferrites, hybrids, power dividers and filters, this book focuses on practical, time-to-market issues to help with projects in the field. Keeping mathematics to a minimum, this comprehensive volume is packed with over 700 illustrations that help clarify key concepts. The reader will gain an in-depth understanding of the special characteristics exploited in microwave and high frequency design. The book is also used in industrial training courses.
Download or read book Optical Transmission Systems Engineering written by Milorad Cvijetic and published by Artech House. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is a practitioner's look at this essential aspect of telecommunications. The book offers professionals hands-on guidance in engineering optical networks for optimal performance. Real-world applications illustrate the principles of transmission engineering
Download or read book The Development of High Quality Passive Components for Sub millimetre Wave Applications written by Fatemeh Aghamoradi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in transistors with cut-off frequencies>400GHz have fuelled interest in security, imaging and telecommunications applications operating well above 100GHz. However, further development of passive networks has become vital in developing such systems, as traditional coplanar waveguide (CPW) transmission lines, the most fundamental passive component, exhibit high losses in the millimetre and sub-millimetre wave regime. This work investigates novel, practical, low loss, transmission lines for frequencies above 100GHz and high-Q passive components composed of these lines. At these frequencies, transmission line losses are primarily due to the influence of the waveguide substrate. We therefore focus on structures which elevate transmission line traces above the substrate using air-bridge technology. Thorough analysis is performed on a range of elevated structures, and analytic / semi-analytic formulae for component figures of merit obtained. These, along with comprehensive 2 and 3D simulations are used to design discrete lines and distributed passive networks, with a focus on the 140-320 GHz frequency range. Innovative fabrication and detailed characterisation of the components are also carried out. The key result is the development of a novel MMIC compatible transmission line structure, Elevated-Grounded CPW, with a relatively simple fabrication process. EGCPW provides high substrate isolation, resulting in a low losses and high-quality passive networks. 50[Omega] EGCPW transmission line shows an insertion loss of 2.5dB/mm at 320GHz, 2.5dB/mm less than CPW. EGCPW passive networks, including resonators and filters, show higher performance than both conventional CPW and other forms of elevated CPW. 30-80% improvements in quality factor are shown, and an EGCPW band-pass filter with the centre frequency of 220GHz shows a 12% reduction in bandwidth and 4.5dB reduced in-band loss compared with its CPW counterpart. Due to the superior performance of MMIC-compatible EGCPW, as well as its ability to support a wide range of characteristic impedances, this structure is suggested as a candidate for widespread use in sub-millimetre wave circuits in order to increase efficiency and reduce losses.
Download or read book Passive Components written by R. P. Deshpande and published by Notion Press. This book was released on 2023-02-27 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passive components are basic building blocks of electrical and electronics engineering. This is an effort to fill the need for a book dedicated to this important subject. It covers not just the physics, theory and varieties of passive components but also their applications in engineering and industry. Electric and magnetic fields, which form the basis of capacitors and inductors, are given sufficiently detailed coverage. LCR passive for circuits filters, oscillators and resonant circuits are dealt with in sufficient detail, while power factor correction in grid systems and industry are also covered among other things. The book aims to serve as a ready reference for students, researchers and users of passive components.
Download or read book Automotive Power Transmission Systems written by Yi Zhang and published by John Wiley & Sons. This book was released on 2018-10-08 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides technical details and developments for all automotive power transmission systems The transmission system of an automotive vehicle is the key to the dynamic performance, drivability and comfort, and fuel economy. Modern advanced transmission systems are the combination of mechanical, electrical and electronic subsystems. The development of transmission products requires the synergy of multi-disciplinary expertise in mechanical engineering, electrical engineering, and electronic and software engineering. Automotive Power Transmission Systems comprehensively covers various types of power transmission systems of ground vehicles, including conventional automobiles driven by internal combustion engines, and electric and hybrid vehicles. The book covers the technical aspects of design, analysis and control for manual transmissions, automatic transmission, CVTs, dual clutch transmissions, electric drives, and hybrid power systems. It not only presents the technical details of key transmission components, but also covers the system integration for dynamic analysis and control. Key features: Covers conventional automobiles as well as electric and hybrid vehicles. Covers aspects of design, analysis and control. Includes the most recent developments in the field of automotive power transmission systems. The book is essential reading for researchers and practitioners in automotive, mechanical and electrical engineering.
Download or read book FOC 82 Proceedings written by and published by Information Gatekeepers Inc. This book was released on with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Optical Communication Systems and Networks written by Milorad Cvijetic and published by Artech House. This book was released on 2013 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource provides the latest details on 5th generation photonic systems that can be readily applied to projects in the field. Moreover, the book provides valuable, time-saving tools for network simulation and modeling. It includes coverage of optical signal transmission systems and networks; a wide range of critical methods and techniques, such as MIMO (multiple-input and multiple-output) by employing spatial modes in few-mode and multicore optical fiber; OFDM (orthogonal frequency-division multiplexing) utilized to enhance the spectral efficiency and to enable elastic optical networking schemes; and advanced modulation and coding schemes to approach the Shannon's channel capacity limit. There are detailed discussions on the basic principles and applications of high-speed digital signal processing, as well as description of the most relevant post-detection compensation techniques
Download or read book Optical Wideband Transmission Systems written by Baack and published by CRC Press. This book was released on 2018-01-18 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with high bit rate systems, which are predestined particularly for the long-distance trunk lines that will be used in future communications networks.
Download or read book Couplers and WDM Devices for Optical Transmission written by IGIC, Inc. Staff and published by Information Gatekeepers Inc. This book was released on 1994 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronics Simplified written by Ian Sinclair and published by Elsevier. This book was released on 2011-05-17 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Previously published as: Electronics made simple / Ian Sinclair. 2002. 2nd ed.
Download or read book Passive Optical Components for Optical Fiber Transmission written by Norio Kashima and published by Artech House Antenna Library. This book was released on 1995 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses connection technologies used for both single- and multimode fibres and explains multifibre connections such as mass-fusion splice and miltifibre connectors. Coverage includes information on fluoride glass fibres, doped fibres (EDFA) and the components.
Download or read book Trilogy of Wireless Power Transfer written by Würth Elektronik and published by . This book was released on 2019-03-15 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book POF Handbook written by Olaf Ziemann and published by Springer Science & Business Media. This book was released on 2008-02-21 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by some of the best known POF experts from Germany, one of the leading countries in POF technology, this is the most comprehensive introduction and survey of POF data communication systems currently available. Half a decade after it was first published, this second edition has been completely revised and updated; it has doubled in size. It features recent experimental results, and more than 1000 figures, 600 references and numerous tables complete the text.
