Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
Download or read book Particle Technology and Applications written by Sunggyu Lee and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Applications presents the theoretical and technological background of particle science and explores up-to-date applications of particle technologies in the chemical, petrochemical, energy, mechanical, and materials industries. It looks at the importance of particle science and technology in the development of efficient chemi
Download or read book 1 World Congress Particle Technology written by Kurt Leschonski and published by . This book was released on 1986 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Size Enlargement written by C. E. Capes and published by Elsevier. This book was released on 2013-10-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Powder Technology, Volume 1: Particle Size Enlargement is the first of a series which will together form a Handbook of Powder Technology, primarily intended for engineers and scientists working in industry. The scope of the Handbook can be defined as being concerned with that part of chemical engineering which deals with processes involving the handling and treatment of material in solid particulate form. This book deals with methods used to create larger entities from fine particles so that the bulk properties of particulates can be improved. These so-called ""size enlargement"" methods evidently concern a broad spectrum of technical disciplines and industries ranging from the relatively small scale requirements of pharmaceutical manufacturers through the tonnage requirements of the fertilizer and minerals processing industries. A primary objective in preparing this book was to present a generalized account of the many size enlargement techniques scattered throughout these diverse industries, with emphasis on similarities and unifying characteristics whenever possible. The book devotes one chapter to each of the principal methods used to bring particles together into agglomerates: agitation methods— tumbling agglomeration, agitation methods—mixer agglomeration, pressure methods, thermal methods, spray and dispersion methods, and agglomeration from liquids.
Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1972 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Technology and Textiles written by Jean Cornier and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-05-22 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalization of material systems is one of the key developments nowadays in the textile industry, where particles are frequently used to enhance the properties of fibers and to add new functionalities. This book focuses on innovative textile materials and is a perfect guide for professionals in the textile industry and scientists alike. An overview of particle technology is provided before addressing all topics relevant to particle-enhanced textiles, i.e. the properties and application of micro/nanoparticles in textiles, production techniques, safety, as well as regulatory and intellectual property aspects. The book covers the composition and applications of various types of textile fillers, finishings, and microfibers. gives an outlook on future trends and challenges in the research, development, and production of nano- and micro-enabled textiles. The authors of the book, who are leading experts in their fields, address many aspects relevant to the use of particle-enhanced textiles in industrial applications as well as in our daily life. A particular emphasis is put on practical examples of applications and products, safety and sustainability issues and the potential for further innovation. This book should bring inspiration for textile scientists in using particles for improving textiles and further expanding their possibilities of use.
Download or read book Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology written by Marie-Isabelle Baraton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on "Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology" was held in Kiev (Ukraine) on June 18- 28, 2000 where more than 90 participants, ranging from Ph.D. students to experienced senior scientists, met and exchanged ideas. This meeting was aimed at stimulating the research work across traditional disciplinary lines by bringing together scientists from diverse research areas related to functional gradient materials and surface layers. It also intended to give opportunities for initiating collaborative works between scientists from NATO and Partner countries and to trigger fruitful and exciting discussions between experienced and young researchers. In this respect, this NATO-ASI has been quite successful. The term of functional gradient materials which originates from Japan in the 1980's describes a class of engineering materials with spatially inhomogeneous microstructures and properties (MRS Bulletin, 1995,20, N°l). These materials can be successfully utilized in various applications like electronic devices, optical films, anti wear and anti-corrosion coatings, thermal barrier coatings, biomaterials, to name only a few. Although these functional gradient materials are not fundamentally new, the use of nanoparticles in their fabrication and in surface layers as well has greatly improved their performances to meet challenging requirements for industrial applications.
Download or read book Particle Characterization in Technology written by Beddow and published by CRC Press. This book was released on 2018-01-18 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume I present an important exposition of some of the most significant areas where particle characterization is applied. The technological fields include pharmaceutical materials, bulk solids, and explosions.
Download or read book Interfacial Separation of Particles written by Shouci Lu and published by Elsevier. This book was released on 2005-01-25 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfacial Separation of Particles is concerned with the processing and separation of fine solid particles in liquid solutions using interfacial technology.Interfacial separation has been finding wide application in many industrial fields, such as pigment and filler production, mineral processing, environmental protection, hydrometallurgy, bioengineering, food and beverage industry and chemical industry. This book describes all interfacial separation techniques and discusses the general and specific fundamentals of the techniques. The book intends to promote theoretical understanding and the more promising developments of interfacial separation technology whilst broadening the reader's background knowledge of industrial suspensions.* Is clearly written based on strong systematic science fundamentals* Provides comprehensive coverage on particle technology, mineral processing and water treatment* Includes practical examples from the different industrial fields
Download or read book Analytical Instrumentation written by BelaG. Liptak and published by Routledge. This book was released on 2018-05-04 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical Instrumentation examines analyzers for detecting pollutants and other hazardous matter, including carbon monoxide, chlorine, fluoride, hydrogen sulfide, mercury, and phosphorous. Also covers selection, application, and sampling procedures.
Download or read book Fluidization written by John M. Matsen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidized beds have gained prominence in many process in dustries (including chemicals, petroleum, metallurgy, food and pharmaceuticals) as a means of bringing particulate solids into contact with gases and/or liquids. Many fluidized bed operations are physical in nature (e.g. drying, coating, classification, granulation, and rapid heat transfer as in quenching or annealing). Other operations involve chemical reactions including the cata lytic cracking of hydrocarbons, the manufacture of acry10nitrite and phthalic anhydride, the roasting of metallurgical ores, and the regeneration of spent catalysts. In recent years fluidized beds have been of special interest because of their potential as the central component in new processes for utilizing coal as a source of energy, notably in coal combustion and gasification processes. The fluidized bed offers a number of advantages over most other methods of contacting, in particular high rates of heat transfer, temperature uniformity and solids mobility. Among the disadvantages are particle losses by entrainment, attrition of solids, limited reactor efficiency due to gas bypassing and gas and solids backmixing, and difficulties in design and scale-up due to the complexity of fluidized beds. The International Fluidization Conference held in Henniker, New Hampshire, U.S.A. from 3-8 August 1980 was the fifth inter national congress devoted to the entire field of fluidization.
Download or read book Theory and Application of Morphological Analysis written by David W. Luerkens and published by CRC Press. This book was released on 1991-07-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one in a series dedicated to fine particle science and technology. Topics covered in the book include the role of definitions, concepts, hypothesis, and laws; morphological analysis of fine particles and surfaces; analytical three-dimensional representations of particle and surface morphologies; the problem of invariance with respect to rotational transformations, as well as transformations characterized by reflection and inversion; matrix mechanics of particle characterization; and general applications of morphological analysis in other areas of science.
Download or read book Pillar Load Transfer Associated with Multiple seam Mining written by Rudy J. Matetic and published by . This book was released on 1987 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report of Investigations written by and published by . This book was released on 1987 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fine Grinding of Coal by a Turbomilling Process written by Edward George Davis and published by . This book was released on 1987 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Drying Processes written by Israel Pala-Rosas and published by BoD – Books on Demand. This book was released on 2020-07-01 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drying stage is important in biotechnological and chemical processes because it allows the pretreatment of feedstocks with different moisture contents for their physical or chemical transformation. Drying also enables the post-treatment of products for their final presentation and packaging, thus having wide application in the food, agro-industrial, pharmaceutical, and chemical industries. Current Drying Processes presents recent advances in the development of drying operations through the presentation of chapters dealing with theoretical and experimental aspects of different technologies, namely solar, convective, fluidized, and ultrasonic drying, for organic and inorganic materials.
Download or read book Superfine Particle Technology written by Noboru Ichinose and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: If a substance is repeatedly subdivided, the result is what are known as "microscopic particles". These particles are distinguished from the solid mass which they originally formed by the size of the surface area per unit weight. This simple difference holds true down to a certain lower size limit, and when this limit is exceeded, a new state of matter is reached, in which the behavior of the particles is quite different to that of the original solid. Particles in this state are termed "superfine particles", and are distinct from ordinary particles. The size of the superfine particles, that is to say the size limit below which particle behavior is completely different from the behavior of the original solid, varies a good deal depending on the physical properties of the substance in question. Properties such as magnetism and electrical resistance are closely related to the internal structural properties of the particles themselves, such as the magnetization processes of their respective magnetic domains, and the mean free path of charged bodies. This internal structure therefore limits the size of the superfine particles. In ceramic processing, on the other hand, the surface area of the particles themselves becomes an even more important factor than their internal structure. In this case, the size of the superfine particles is determined by the interaction between water and solvents on the surface of the particles.
