Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow. The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable. These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.

Download or read book Catalysis written by John R. Anderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic oxidation processes are bf central importance to a substantial part of large-scale chemical industry. Indeed, this area of industrial catalysis has an extremely long history which stretches back well into the last century. The development and growth of catalytic oxi dation processes for the manufacture of commodities such as sulfuric acid and nitric acid can be viewed as indicators for the growth of the early and middle years of the entire inorganic chemical industry, and in an analogous fashion the manufacture of products such as phthalic anhydride, maleic anhydride and ethylene oxide has been central to the development of an organic chemical industry. We should all be able" to learn from history, and present-day scientists and technologists will find considerable benefit in following the account of the historical development of catalytic oxidation processes presented in Chapter I by Drs. G. Chinchen, P. Davies and R. J. Sampson. Alkenes are important intermediates in many processes in organic chemical industry. Being mostly petroleum derived, the alkene availability pattern does not necessar ily match consumption requirements and an alkene inter conversion process such as metathesis is clearly of in dustrial importance. In fact alkene metathesis, in addi tion to its industrial significance, poses an interesting mechanistic problem. upon which considerable effort has been expended in recent years and which is now fairly well understood.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Methane Conversion by Oxidative Processes written by Wolf and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reasonable case could be made that the scientific interest in catalytic oxidation was the basis for the recognition of the phenomenon of catalysis. Davy, in his attempt in 1817 to understand the science associated with the safety lamp he had invented a few years earlier, undertook a series of studies that led him to make the observation that a jet of gas, primarily methane, would cause a platinum wire to continue to glow even though the flame was extinguished and there was no visible flame. Dobereiner reported in 1823 the results of a similar investigation and observed that spongy platina would cause the ignition of a stream of hydrogen in air. Based on this observation Dobereiner invented the first lighter. His lighter employed hydrogen (generated from zinc and sulfuric acid) which passed over finely divided platinum and which ignited the gas. Thousands of these lighters were used over a number of years. Dobereiner refused to file a patent for his lighter, commenting that "I love science more than money." Davy thought the action of platinum was the result of heat while Dobereiner believed the ~ffect ~as a manifestation of electricity. Faraday became interested in the subject and published a paper on it in 1834; he concluded that the cause for this reaction was similar to other reactions.

Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. Chapters written by experts in each area Extensive bibliography supporting each chapter Detailed index Up-to-date diagrams and full colour illustrations

Download or read book Handbook of Induction Heating written by Valery Rudnev and published by CRC Press. This book was released on 2017-07-14 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Handbook of Induction Heating reflects the number of substantial advances that have taken place over the last decade in theory, computer modeling, semi-conductor power supplies, and process technology of induction heating and induction heat treating. This edition continues to be a synthesis of information, discoveries, and technical insights that have been accumulated at Inductoheat Inc. With an emphasis on design and implementation, the newest edition of this seminal guide provides numerous case studies, ready-to-use tables, diagrams, rules-of-thumb, simplified formulas, and graphs for working professionals and students.

Download or read book The Partial Oxidation of Methane written by Earl Cassidy Kirk and published by . This book was released on 1932 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Strategies for the Upgrading of Natural Gas Fundamentals Challenges and Opportunities written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2005-06-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy and feedstock materials for the chemical industry are in increasing demand and, with constraints related to the availability and use of oil, the energy and chemical industry is undergoing considerable changes. In recent years, major restructuring has occurred in the oil, petrochemical, and chemical industry, with increasing attention devoted to the use of natural gas, methane in particular, as a chemical feedstock rather than just as a fuel. The conversion of remote natural gas into liquid fuels or other transportable chemicals is a challenge to industrial catalysis. Few processes exist so far with the major ones involving the conversion of natural gas to synthesis gas by steam reforming, CO2 reforming, or partial oxidation, followed by the syntheses of methanol, hydrocarbons (Fischer-Tropsch synthesis), or ammonia. In this book, a comprehensive overview of the field of processing natural gas is given, through a series of chapters written by leading scientists and engineers in the field. New developments are discussed and current work relevant to the area is shown by a series of recent works by researchers working in this and related fields.

Download or read book Methane and its Derivatives written by Sunggyu Lee and published by CRC Press. This book was released on 2017-10-05 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Covers the chemistry, process chemistry, technology, engineering, and economics of methane conversion, including its environmental impact and commercial exploitation. Begins with methane's availability and increasing importance as an environmentally acceptable natural resource alternative and feedstock."

Download or read book Surface Properties and Catalysis by Non Metals written by J.P. Bonnelle and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of heterogeneous catalysis. it is convenient to distinguish. in a perfectly unjustified and over··simplified way. bet:leen metal catalysts. 2nd the other catalysts. The fj.J"st are easy to define : they are those in which a reduced metal is the active phase. It is thus easy to circumscribe. by exclusion, the other class namely the "non-metals". We have adopted this definition for the sake of our colleagues working on catalysis by metals, and to avoid a lengthy title like "sm' face pl"operties and catalysts by transi tion metal oxides. sulftdes, carbides, nitriles, etc. Defined in this manner, non-metal catalysts represented, in 1980, 84 wt. % of the industrial heterogeneous catalysts. To be more specific, this proportion corresponds to catalysts which, under the working conditions in the industrial ?lant. contain their catalytically active metallic elements in a non-reduced state. It should however be recalled that most metal catalysts are supported on oxides, which, often, repl'esent over 90% (sometimes 99.4% in the case of the platinum reforming catalysts) of the total weight.

Download or read book Nanostructured Catalysts written by Christian Hess and published by Royal Society of Chemistry. This book was released on 2011-07-22 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive up-to-date summary of the existing information on the structural/electronic properties, chemistry and catalytic properties of vanadium and molybdenum containing catalysts. It discusses the importance of nanoscience for the controlled synthesis of catalysts with functional properties and introduces the necessary background regarding surface properties and preparation techniques, leading from a textbook level to the current state of knowledge. Then follows an extensive survey and analysis of the existing open and patent literature - an essential knowledge source for the development of the new generation of partial oxidation catalysts. Important examples from current research on partial oxidation reactions are reviewed from experts in the field. The next chapter discusses the importance of 2- and 3-dimensional model systems for a fundamental understanding of the structure of transition metal oxide catalysts and its correlation to reactivity. Finally, an outlook on research opportunities within the area of partial oxidation reactions is presented.

Download or read book Concepts in Syngas Manufacture written by Jens Rostrup-Nielsen and published by World Scientific. This book was released on 2011 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general overview of syngas technologies as well as an in-depth analysis of the steam reforming process. Syngas is a mixture of hydrogen and carbon oxides which can be made from hydrocarbons, coal and biomass. It is an important intermediate in the chemical industry for manufacture of ammonia, methanol and other petrochemicals as well as hydrogen for refineries and fuel cells. Syngas is playing a growing role in the energy sector, because it can be converted into a number of important energy carriers and fuels. Syngas catalysis creates new options and flexibility in the complex energy network. The steam reforming process is the main technology today for manufacture of syngas. It is a complex intern-mingling of catalysis and heat transfer with restrictions caused by secondary phenomena such as carbon formation. Many of the principles are applicable for other gasification technologies of growing importance. Concepts of Syngas Preparation aims to provide a comprehensive introduction to this complex field of growing importance and gives a detailed analysis of the catalyst and process problems. This book also serves as an important link between science and industry by illustrating how the basic principles can be applied to solve design issues and operational problems.

Download or read book Catalytic Partial Oxidation of Methane at High Flowrates written by Keith Lawrence Hohn and published by . This book was released on 1999 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Partial Oxidation of Methane written by George C. Pedersen and published by . This book was released on 1962 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gaseous Carbon Waste Streams Utilization written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-02-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the quest to mitigate the buildup of greenhouse gases in Earth's atmosphere, researchers and policymakers have increasingly turned their attention to techniques for capturing greenhouse gases such as carbon dioxide and methane, either from the locations where they are emitted or directly from the atmosphere. Once captured, these gases can be stored or put to use. While both carbon storage and carbon utilization have costs, utilization offers the opportunity to recover some of the cost and even generate economic value. While current carbon utilization projects operate at a relatively small scale, some estimates suggest the market for waste carbon-derived products could grow to hundreds of billions of dollars within a few decades, utilizing several thousand teragrams of waste carbon gases per year. Gaseous Carbon Waste Streams Utilization: Status and Research Needs assesses research and development needs relevant to understanding and improving the commercial viability of waste carbon utilization technologies and defines a research agenda to address key challenges. The report is intended to help inform decision making surrounding the development and deployment of waste carbon utilization technologies under a variety of circumstances, whether motivated by a goal to improve processes for making carbon-based products, to generate revenue, or to achieve environmental goals.