Download or read book Parametric Modeling with I DEAS 12 written by Randy Shih and published by SDC Publications. This book was released on 2006-06 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parametric Modeling with I-DEAS 12 is written as a training guide for students. The text covers I-DEAS 12 and is a hands-on, exercise-intensive look at all the important concepts needed to do feature-based parametric solid modeling. The basic premise of this book is that the more models you create using I-DEAS, the better you learn the software.
Download or read book Parametric Modeling with I DEAS 9 written by Randy H. Shih and published by . This book was released on 2002-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with I DEAS 8 written by Randy H. Shih and published by . This book was released on 2000 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parametric Modeling with NX 12 written by Randy Shih and published by SDC Publications. This book was released on 2018 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with NX 12 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses NX 12 as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.
Download or read book Perspectives from Europe and Asia on Engineering Design and Manufacture written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2004-04-30 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the first proceedings of a series of symposia on the exchange of best practices and research in engineering design and manufacture organized focusing on Europe and Asia by a group of researchers from European and Asian Universities working on several EU funded projects. This very first book will explore the difference and communalities of European and Asian research and practice in this very important field. With the rapid economic expansion of Asia and the gradual shift of manufacturing from Europe and the USA to Asia, this Symposium will provide a timely forum for leading researchers in the field to exchange their research findings and experience. The book covers this first symposium, and aims to give insights to these on-going changes, shows their implications from design and manufacture perspective for both Europe and Asia and identifies new research topics to improve industrial practice. The primary audience of this book are researchers in the field of engineering design and manufacture, industrialists and business persons who are interested in finding out the state of design and manufacture in Asia and Europe.
Download or read book Building Product Models written by Charles M Eastman and published by CRC Press. This book was released on 2018-02-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Product Models thoroughly presents the concepts, technology, and methods now used to work out what will become the building product model - a new, digital representation for architecture, civil engineering, and building construction. Organized into three sections (history, current tools and concepts, and existing efforts and research issues), this resource provides the field of building product modeling with a standard reference as well as a single, comprehensive text for university courses. Until now, all the efforts in building modeling have been reported in research journals and conference proceedings or been made available as draft standards on the Internet. Building Product Models is the only book available on this vital field, bringing together essential aspects of major efforts from the early 1970s to the present.
Download or read book Computational Science and Its Applications ICCSA 2006 written by Marina Gavrilova and published by Springer Science & Business Media. This book was released on 2006 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 3980-3984 constitutes the refereed proceedings of the International Conference on Computational Science and Its Applications, ICCSA 2006, held in Glasgow, UK in May 2006.The five volumes present a total of 664 papers selected from over 2300 submissions. The papers present a wealth of original research results in the field of computational science, from foundational issues in computer science and mathematics to advanced applications in virtually all sciences making use of computational techniques. The topics of the refereed papers are structured according to the five major conference themes: computational methods, algorithms and applications high performance technical computing and networks advanced and emerging applications geometric modelling, graphics and visualization information systems and information technologies.Moreover, submissions from 31 Workshops and technical sessions in the areas, such as information security, mobile communication, grid computing, modeling, optimization, computational geometry, virtual reality, symbolic computations, molecular structures, Web systems and intelligence, spatial analysis, bioinformatics and geocomputations, contribute to this publication.
Download or read book Parametric Modeling with Ideas 10 written by Randy Shih and published by . This book was released on 2003-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CAD Data Transfer for Solid Models written by E.G. Schlechtendahl and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principal authors: U. Kroszynski, B. Palstr9Sm 1.1 The evolution of concepts and specifications for CAD data exchange The CAD/CAM community has witnessed, during the last decade, the appearance of several specifications as well as proposals for standards which either attempt to cover wider areas or to be more reliable and stable than the others. With the rapid evolution of both hardware and software, the capabilities offered by CAD systems and CAD based application systems are far more advanced than they were only ten years ago, even when they are now based on micro-computers or personal comput ers. The situation with standards, however, is not and cannot be so. In order to be reliable and accepted by a wide community of both vendors and users, a standard has to be sta ble. This implies a life span of at least a decade. This also implies that the standard has to be general and flexible enough to accommodate present as well as expected future developments. 1.1.1 IGES The initial development of concepts for CAD data exchange is strongly influenced by the US Integrated Computer Aided Manufacturing (ICAM) programme, that dealt with the development of methods for data exchange. In September 1979, a subgroup was estab lished with participation of the National Bureau of Standards, the General Electric Com pany, and the Boeing Company. The result of this effort was the Initial Graphics Exchange Specification (IGES) that was published as a NBS report [61] in 1980.
Download or read book Advances in Concurrent Engineering written by Biren Prasad and published by CRC Press. This book was released on 1996-08-22 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Design to Gain a Competitive Edge written by Xiu-Tian Yan and published by Springer Science & Business Media. This book was released on 2008-07-30 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent rapid globalisation of manufacturing industries leads to a drive and thirst for rapid advancements in technological development and expertise in the fields of advanced design and manufacturing, especially at their interfaces. This development results in many economical benefits to and improvement of quality of life for many people all over the world. Technically speaking, this rapid development also create many opportunities and challenges for both industrialists and academics, as the design requirements and constraints have completely changed in this global design and manufacture environment. Consequently the way to design, manufacture and realise products have changed as well. The days of designing for a local market and using local suppliers in manufacturing have gone, if enterprises aim to maintain their competitiveness and global expansion leading to further success. In this global context and scenario, both industry and the academia have an urgent need to equip themselves with the latest knowledge, technology and methods developed for engineering design and manufacture. To address this shift in engineering design and manufacture, supported by the European Commission under the Asia Link Programme with a project title FASTAHEAD (A Framework Approach to Strengthening Asian Higher Education in Advanced Design and Manufacture), three key project partners, namely the University of Strathclyde of the United Kingdom, Northwestern Polytechncial University of China, and the Troyes University of Technology of France organised a third international conference.
Download or read book Parametric Modeling with UGS NX 6 written by Randy H. Shih and published by . This book was released on 2008-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Primary Goal of Parametric Modeling with UGS NX 6 is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text uses UGS NX as the modeling tool and the chapters guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of ten tutorial style lessons designed to introduce beginning CAD users to UGS NX. Each lesson introduces a new set of commands and concepts, building on previous lessons.
Download or read book Proceedings of the Congress of the Indian Society of Theoretical and Applied Mechanics written by Indian Society of Theoretical and Applied Mechanics. Congress and published by . This book was released on 2002 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbine Blade Investment Casting Die Technology written by Dinghua Zhang and published by Springer. This book was released on 2017-08-10 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the theory and techniques of digital design and manufacturing for turbine blade investment casting, this book systematically summarizes the advances in applications in this field. It describes advanced digital design theory and methods and provides practical technical references for investment casting die design and manufacturing. The theories, methods and cases presented here are largely derived from the author’s practical engineering experience and the research he and his team have carried out since the 1990s. It includes academic papers, technical reports and patent literature, and provides a valuable guide to engineers involved in the die-design process. Given its comprehensive coverage, the book makes a significant contribution to investment-casting die design and aero-engine blade manufacturing, while at the same time promoting the development of aero-engine manufacturing technologies
Download or read book Biologically Responsive Biomaterials for Tissue Engineering written by Iulian Vasile Antoniac and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in the area of biomaterials, bionanotechnology, tissue engineering, and medical devices are becoming the core of health care. Almost all medical specialties involve the use of biomaterials, and research plays a key role in the development of new and improved treatment modalities. This volume focuses on several current trends in tissue engineering, remodelling and regeneration. Leading researchers describe the use of nanomaterials to create new functionalities when interfaced with biological molecules or structures. In addition to coverage of basic science and engineering aspects, a range of applications in bionanotechnology are presented, including diagnostic devices, contrast agents, analytical tools, physical therapy applications, and vehicles for targeted drug delivery. The use of polymers, alloys, and composites, or a combination of these, for biomaterials applications in orthopaedics is also explored. These contributions represent essential reading for the biomaterials and biomedical engineering communities, and can serve as instructional course lectures targeted at graduate and post-graduate students.
Download or read book Proceedings of the ASME Heat Transfer Division 2005 written by and published by . This book was released on 2005 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Heat Transfer Division written by and published by . This book was released on 2005 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
