Download or read book Parallel Computing On the Road to Exascale written by G.R. Joubert and published by IOS Press. This book was released on 2016-04-28 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: As predicted by Gordon E. Moore in 1965, the performance of computer processors increased at an exponential rate. Nevertheless, the increases in computing speeds of single processor machines were eventually curtailed by physical constraints. This led to the development of parallel computing, and whilst progress has been made in this field, the complexities of parallel algorithm design, the deficiencies of the available software development tools and the complexity of scheduling tasks over thousands and even millions of processing nodes represent a major challenge to the construction and use of more powerful parallel systems. This book presents the proceedings of the biennial International Conference on Parallel Computing (ParCo2015), held in Edinburgh, Scotland, in September 2015. Topics covered include computer architecture and performance, programming models and methods, as well as applications. The book also includes two invited talks and a number of mini-symposia. Exascale computing holds enormous promise in terms of increasing scientific knowledge acquisition and thus contributing to the future well-being and prosperity of mankind. A number of innovative approaches to the development and use of future high-performance and high-throughput systems are to be found in this book, which will be of interest to all those whose work involves the handling and processing of large amounts of data.
Download or read book Applications Tools and Techniques on the Road to Exascale Computing written by Koen de Bosschere and published by IOS Press. This book was released on 2012 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single processing units have now reached a point where further major improvements in their performance are restricted by their physical limitations. This is causing a slowing down in advances at the same time as new scientific challenges are demanding exascale speed. This has meant that parallel processing has become key to High Performance Computing (HPC). This book contains the proceedings of the 14th biennial ParCo conference, ParCo2011, held in Ghent, Belgium. The ParCo conferences have traditionally concentrated on three main themes: Algorithms, Architectures and Applications. Nowadays though, the focus has shifted from traditional multiprocessor topologies to heterogeneous and manycores, incorporating standard CPUs, GPUs (Graphics Processing Units) and FPGAs (Field Programmable Gate Arrays). These platforms are, at a higher abstraction level, integrated in clusters, grids and clouds. The papers presented here reflect this change of focus. New architectures, programming tools and techniques are also explored, and the need for exascale hardware and software was also discussed in the industrial session of the conference.This book will be of interest to all those interested in parallel computing today, and progress towards the exascale computing of tomorrow.
Download or read book Data Intensive Computing Applications for Big Data written by M. Mittal and published by IOS Press. This book was released on 2018-01-31 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book ‘Data Intensive Computing Applications for Big Data’ discusses the technical concepts of big data, data intensive computing through machine learning, soft computing and parallel computing paradigms. It brings together researchers to report their latest results or progress in the development of the above mentioned areas. Since there are few books on this specific subject, the editors aim to provide a common platform for researchers working in this area to exhibit their novel findings. The book is intended as a reference work for advanced undergraduates and graduate students, as well as multidisciplinary, interdisciplinary and transdisciplinary research workers and scientists on the subjects of big data and cloud/parallel and distributed computing, and explains didactically many of the core concepts of these approaches for practical applications. It is organized into 24 chapters providing a comprehensive overview of big data analysis using parallel computing and addresses the complete data science workflow in the cloud, as well as dealing with privacy issues and the challenges faced in a data-intensive cloud computing environment. The book explores both fundamental and high-level concepts, and will serve as a manual for those in the industry, while also helping beginners to understand the basic and advanced aspects of big data and cloud computing.
Download or read book New Frontiers in High Performance Computing and Big Data written by G. Fox and published by IOS Press. This book was released on 2017-11-14 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, parallel computing platforms have increasingly formed the basis for the development of high performance systems primarily aimed at the solution of intensive computing problems, and the application of parallel computing systems has also become a major factor in furthering scientific research. But such systems also offer the possibility of solving the problems encountered in the processing of large-scale scientific data sets, as well as in the analysis of Big Data in the fields of medicine, social media, marketing, economics etc. This book presents papers from the International Research Workshop on Advanced High Performance Computing Systems, held in Cetraro, Italy, in July 2016. The workshop covered a wide range of topics and new developments related to the solution of intensive and large-scale computing problems, and the contributions included in this volume cover aspects of the evolution of parallel platforms and highlight some of the problems encountered with the development of ever more powerful computing systems. The importance of future large-scale data science applications is also discussed. The book will be of particular interest to all those involved in the development or application of parallel computing systems.
Download or read book Deep Learning for Image Processing Applications written by D.J. Hemanth and published by IOS Press. This book was released on 2017-12 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep learning and image processing are two areas of great interest to academics and industry professionals alike. The areas of application of these two disciplines range widely, encompassing fields such as medicine, robotics, and security and surveillance. The aim of this book, ‘Deep Learning for Image Processing Applications’, is to offer concepts from these two areas in the same platform, and the book brings together the shared ideas of professionals from academia and research about problems and solutions relating to the multifaceted aspects of the two disciplines. The first chapter provides an introduction to deep learning, and serves as the basis for much of what follows in the subsequent chapters, which cover subjects including: the application of deep neural networks for image classification; hand gesture recognition in robotics; deep learning techniques for image retrieval; disease detection using deep learning techniques; and the comparative analysis of deep data and big data. The book will be of interest to all those whose work involves the use of deep learning and image processing techniques.
Download or read book Euro Par 2022 Parallel Processing Workshops written by Jeremy Singer and published by Springer Nature. This book was released on 2023-05-01 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the workshops held at the 28th International European Conference on Parallel and Distributed Computing, Euro-Par 2022, which took place in Glasgow, UK, in August 22–26, 2022 Out of a total of 35 submissions 24 papers have been accepted, 19 of these are included in this book. They stem from the following workshops: - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HeteroPar)- Workshop on Asynchronous Many-Task systems for Exascale (AMTE) - Workshop on Domain Specific Languages for High-Performance Computing (DSL-HPC)- Workshop on Distributed and Heterogeneous Programming in C and C++ (DHPCC++)- Workshop on Resiliency in High Performance Computing in Clouds, Grids, and Clusters (Resilience) In addition, the proceedings also contains 6 extended abstracts from the PhD Symposium.
Download or read book Co Scheduling of HPC Applications written by C. Trinitis and published by IOS Press. This book was released on 2017-01-05 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-performance computing (HPC) has become an essential tool in the modern world. However, systems frequently run well below theoretical peak performance, with only 5% being reached in many cases. In addition, costly components often remain idle when not required for specific programs, as parts of the HPC systems are reserved and used exclusively for applications. A project was started in 2013, funded by the German Ministry of Education and Research (BMBF), to find ways of improving system utilization by compromising on dedicated reservations for HPC codes and applying co-scheduling of applications instead. The need was recognized for international discussion to find the best solutions to this HPC utilization issue, and a workshop on co-scheduling in HPC, open to international participants – the COSH workshop – was held for the first time at the European HiPEAC conference, in Prague, Czech Republic, in January 2016. This book presents extended versions of papers submitted to the workshop, reviewed for the second time to ensure scientific quality. It also includes an introduction to the main challenges of co-scheduling and a foreword by Arndt Bode, head of LRZ, one of Europe's leading computer centers, as well as a chapter corresponding to the invited keynote speech by Intel, whose recent extensions to their processors allow for better control of co-scheduling.
Download or read book Parallel Computing is Everywhere written by S. Bassini and published by IOS Press. This book was released on 2018-03-07 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most powerful computers work by harnessing the combined computational power of millions of processors, and exploiting the full potential of such large-scale systems is something which becomes more difficult with each succeeding generation of parallel computers. Alternative architectures and computer paradigms are increasingly being investigated in an attempt to address these difficulties. Added to this, the pervasive presence of heterogeneous and parallel devices in consumer products such as mobile phones, tablets, personal computers and servers also demands efficient programming environments and applications aimed at small-scale parallel systems as opposed to large-scale supercomputers. This book presents a selection of papers presented at the conference: Parallel Computing (ParCo2017), held in Bologna, Italy, on 12 to 15 September 2017. The conference included contributions about alternative approaches to achieving High Performance Computing (HPC) to potentially surpass exa- and zetascale performances, as well as papers on the application of quantum computers and FPGA processors. These developments are aimed at making available systems better capable of solving intensive computational scientific/engineering problems such as climate models, security applications and classic NP-problems, some of which cannot currently be managed by even the most powerful supercomputers available. New areas of application, such as robotics, AI and learning systems, data science, the Internet of Things (IoT), and in-car systems and autonomous vehicles were also covered. As always, ParCo2017 attracted a large number of notable contributions covering present and future developments in parallel computing, and the book will be of interest to all those working in the field.
Download or read book Parallel Computing Technology Trends written by I. Foster and published by IOS Press. This book was released on 2020-03-25 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: The year 2019 marked four decades of cluster computing, a history that began in 1979 when the first cluster systems using Components Off The Shelf (COTS) became operational. This achievement resulted in a rapidly growing interest in affordable parallel computing for solving compute intensive and large scale problems. It also directly lead to the founding of the Parco conference series. Starting in 1983, the International Conference on Parallel Computing, ParCo, has long been a leading venue for discussions of important developments, applications, and future trends in cluster computing, parallel computing, and high-performance computing. ParCo2019, held in Prague, Czech Republic, from 10 – 13 September 2019, was no exception. Its papers, invited talks, and specialized mini-symposia addressed cutting-edge topics in computer architectures, programming methods for specialized devices such as field programmable gate arrays (FPGAs) and graphical processing units (GPUs), innovative applications of parallel computers, approaches to reproducibility in parallel computations, and other relevant areas. This book presents the proceedings of ParCo2019, with the goal of making the many fascinating topics discussed at the meeting accessible to a broader audience. The proceedings contains 57 contributions in total, all of which have been peer-reviewed after their presentation. These papers give a wide ranging overview of the current status of research, developments, and applications in parallel computing.
Download or read book Parallel Computing written by Barbara Chapman and published by IOS Press. This book was released on 2010 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Multicores and GPUs to Petascale. Parallel computing technologies have brought dramatic changes to mainstream computing the majority of todays PCs, laptops and even notebooks incorporate multiprocessor chips with up to four processors. Standard components are increasingly combined with GPUs Graphics Processing Unit, originally designed for high-speed graphics processing, and FPGAs Free Programmable Gate Array to build parallel computers with a wide spectrum of high-speed processing functions. The scale of this powerful hardware is limited only by factors such as energy consumption and thermal control. However, in addition to"
Download or read book Big Data and HPC Ecosystem and Convergence written by L. Grandinetti and published by IOS Press. This book was released on 2018-08-22 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the increasing need to solve complex problems, high-performance computing (HPC) is now one of the most fundamental infrastructures for scientific development in all disciplines, and it has progressed massively in recent years as a result. HPC facilitates the processing of big data, but the tremendous research challenges faced in recent years include: the scalability of computing performance for high velocity, high variety and high volume big data; deep learning with massive-scale datasets; big data programming paradigms on multi-core; GPU and hybrid distributed environments; and unstructured data processing with high-performance computing. This book presents 19 selected papers from the TopHPC2017 congress on Advances in High-Performance Computing and Big Data Analytics in the Exascale era, held in Tehran, Iran, in April 2017. The book is divided into 3 sections: State of the Art and Future Scenarios, Big Data Challenges, and HPC Challenges, and will be of interest to all those whose work involves the processing of Big Data and the use of HPC.
Download or read book Euro Par 2018 Parallel Processing written by Marco Aldinucci and published by Springer. This book was released on 2018-08-20 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 24th International Conference on Parallel and Distributed Computing, Euro-Par 2018, held in Turin, Italy, in August 2018. The 57 full papers presented in this volume were carefully reviewed and selected from 194 submissions. They were organized in topical sections named: support tools and environments; performance and power modeling, prediction and evaluation; scheduling and load balancing; high performance architecutres and compilers; parallel and distributed data management and analytics; cluster and cloud computing; distributed systems and algorithms; parallel and distributed programming, interfaces, and languages; multicore and manycore methods and tools; theory and algorithms for parallel computation and networking; parallel numerical methods and applications; and accelerator computing for advanced applications.
Download or read book Parallel Computing Accelerating Computational Science and Engineering CSE written by M. Bader and published by IOS Press. This book was released on 2014-03-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computing has been the enabling technology of high-end machines for many years. Now, it has finally become the ubiquitous key to the efficient use of any kind of multi-processor computer architecture, from smart phones, tablets, embedded systems and cloud computing up to exascale computers. _x000D_ This book presents the proceedings of ParCo2013 – the latest edition of the biennial International Conference on Parallel Computing – held from 10 to 13 September 2013, in Garching, Germany. The conference focused on several key parallel computing areas. Themes included parallel programming models for multi- and manycore CPUs, GPUs, FPGAs and heterogeneous platforms, the performance engineering processes that must be adapted to efficiently use these new and innovative platforms, novel numerical algorithms and approaches to large-scale simulations of problems in science and engineering._x000D_ The conference programme also included twelve mini-symposia (including an industry session and a special PhD Symposium), which comprehensively represented and intensified the discussion of current hot topics in high performance and parallel computing. These special sessions covered large-scale supercomputing, novel challenges arising from parallel architectures (multi-/manycore, heterogeneous platforms, FPGAs), multi-level algorithms as well as multi-scale, multi-physics and multi-dimensional problems._x000D_ It is clear that parallel computing – including the processing of large data sets (“Big Data”) – will remain a persistent driver of research in all fields of innovative computing, which makes this book relevant to all those with an interest in this field.
Download or read book Designing a Modern Skeleton Programming Framework for Parallel and Heterogeneous Systems written by August Ernstsson and published by Linköping University Electronic Press. This book was released on 2020-10-21 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's society is increasingly software-driven and dependent on powerful computer technology. Therefore it is important that advancements in the low-level processor hardware are made available for exploitation by a growing number of programmers of differing skill level. However, as we are approaching the end of Moore's law, hardware designers are finding new and increasingly complex ways to increase the accessible processor performance. It is getting more and more difficult to effectively target these processing resources without expert knowledge in parallelization, heterogeneous computation, communication, synchronization, and so on. To ensure that the software side can keep up, advanced programming environments and frameworks are needed to bridge the widening gap between hardware and software. One such example is the pattern-centric skeleton programming model and in particular the SkePU project. The work presented in this thesis first redesigns the SkePU framework based on modern C++ variadic template metaprogramming and state-of-the-art compiler technology. It then explores new ways to improve performance: by providing new patterns, improving the data access locality of existing ones, and using both static and dynamic knowledge about program flow. The work combines novel ideas with practical evaluation of the approach on several applications. The advancements also include the first skeleton API that allows variadic skeletons, new data containers, and finally an approach to make skeleton programming more customizable without compromising universal portability.
Download or read book High Performance Computing in Science and Engineering 17 written by Wolfgang E. Nagel and published by Springer. This book was released on 2018-02-16 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2017. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance.The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.
Download or read book Algorithms and Architectures for Parallel Processing written by Jesus Carretero and published by Springer. This book was released on 2016-11-30 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed workshop proceedings of the 16th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2016, held in Granada, Spain, in December 2016. The 30 full papers presented were carefully reviewed and selected from 58 submissions. They cover many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems trying to push beyond the limits of existing technologies, including experimental efforts, innovative systems, and investigations that identify weaknesses in existing parallel processing technology.
Download or read book Euro Par 2017 Parallel Processing Workshops written by Dora B. Heras and published by Springer. This book was released on 2018-02-07 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the workshops of the 23rd International Conference on Parallel and Distributed Computing, Euro-Par 2017, held in Santiago de Compostela. Spain in August 2017. The 59 full papers presented were carefully reviewed and selected from 119 submissions. Euro-Par is an annual, international conference in Europe, covering all aspects of parallel and distributed processing. These range from theory to practice, from small to the largest parallel and distributed systems and infrastructures, from fundamental computational problems to full-edged applications, from architecture, compiler, language and interface design and implementation to tools, support infrastructures, and application performance aspects.
