Download or read book Parallel Computing Architectures and APIs written by Vivek Kale and published by CRC Press. This book was released on 2019-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Computing Architectures and APIs: IoT Big Data Stream Processing commences from the point high-performance uniprocessors were becoming increasingly complex, expensive, and power-hungry. A basic trade-off exists between the use of one or a small number of such complex processors, at one extreme, and a moderate to very large number of simpler processors, at the other. When combined with a high-bandwidth, interprocessor communication facility leads to significant simplification of the design process. However, two major roadblocks prevent the widespread adoption of such moderately to massively parallel architectures: the interprocessor communication bottleneck, and the difficulty and high cost of algorithm/software development. One of the most important reasons for studying parallel computing architectures is to learn how to extract the best performance from parallel systems. Specifically, you must understand its architectures so that you will be able to exploit those architectures during programming via the standardized APIs. This book would be useful for analysts, designers and developers of high-throughput computing systems essential for big data stream processing emanating from IoT-driven cyber-physical systems (CPS). This pragmatic book: Devolves uniprocessors in terms of a ladder of abstractions to ascertain (say) performance characteristics at a particular level of abstraction Explains limitations of uniprocessor high performance because of Moore’s Law Introduces basics of processors, networks and distributed systems Explains characteristics of parallel systems, parallel computing models and parallel algorithms Explains the three primary categorical representatives of parallel computing architectures, namely, shared memory, message passing and stream processing Introduces the three primary categorical representatives of parallel programming APIs, namely, OpenMP, MPI and CUDA Provides an overview of Internet of Things (IoT), wireless sensor networks (WSN), sensor data processing, Big Data and stream processing Provides introduction to 5G communications, Edge and Fog computing Parallel Computing Architectures and APIs: IoT Big Data Stream Processing discusses stream processing that enables the gathering, processing and analysis of high-volume, heterogeneous, continuous Internet of Things (IoT) big data streams, to extract insights and actionable results in real time. Application domains requiring data stream management include military, homeland security, sensor networks, financial applications, network management, web site performance tracking, real-time credit card fraud detection, etc.
Download or read book Parallel Computing written by Christian Bischof and published by IOS Press. This book was released on 2008 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: ParCo2007 marks a quarter of a century of the international conferences on parallel computing that started in Berlin in 1983. The aim of the conference is to give an overview of the developments, applications and future trends in high-performance computing for various platforms.
Download or read book Parallel Computing Architectures and APIs written by Vivek Kale and published by CRC Press. This book was released on 2019-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Computing Architectures and APIs: IoT Big Data Stream Processing commences from the point high-performance uniprocessors were becoming increasingly complex, expensive, and power-hungry. A basic trade-off exists between the use of one or a small number of such complex processors, at one extreme, and a moderate to very large number of simpler processors, at the other. When combined with a high-bandwidth, interprocessor communication facility leads to significant simplification of the design process. However, two major roadblocks prevent the widespread adoption of such moderately to massively parallel architectures: the interprocessor communication bottleneck, and the difficulty and high cost of algorithm/software development. One of the most important reasons for studying parallel computing architectures is to learn how to extract the best performance from parallel systems. Specifically, you must understand its architectures so that you will be able to exploit those architectures during programming via the standardized APIs. This book would be useful for analysts, designers and developers of high-throughput computing systems essential for big data stream processing emanating from IoT-driven cyber-physical systems (CPS). This pragmatic book: Devolves uniprocessors in terms of a ladder of abstractions to ascertain (say) performance characteristics at a particular level of abstraction Explains limitations of uniprocessor high performance because of Moore’s Law Introduces basics of processors, networks and distributed systems Explains characteristics of parallel systems, parallel computing models and parallel algorithms Explains the three primary categorical representatives of parallel computing architectures, namely, shared memory, message passing and stream processing Introduces the three primary categorical representatives of parallel programming APIs, namely, OpenMP, MPI and CUDA Provides an overview of Internet of Things (IoT), wireless sensor networks (WSN), sensor data processing, Big Data and stream processing Provides introduction to 5G communications, Edge and Fog computing Parallel Computing Architectures and APIs: IoT Big Data Stream Processing discusses stream processing that enables the gathering, processing and analysis of high-volume, heterogeneous, continuous Internet of Things (IoT) big data streams, to extract insights and actionable results in real time. Application domains requiring data stream management include military, homeland security, sensor networks, financial applications, network management, web site performance tracking, real-time credit card fraud detection, etc.
Download or read book Experimental Parallel Computing Architectures written by J. J. Dongarra and published by North Holland. This book was released on 1987 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Systems Organization -- Parallel architecture.
Download or read book Using OpenCL written by Janusz Kowalik and published by IOS Press. This book was released on 2012 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Parallel Programming written by Thomas Rauber and published by Springer Science & Business Media. This book was released on 2013-06-13 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in hardware architecture, like hyper-threading or multicore processors, mean that parallel computing resources are available for inexpensive desktop computers. In only a few years, many standard software products will be based on concepts of parallel programming implemented on such hardware, and the range of applications will be much broader than that of scientific computing, up to now the main application area for parallel computing. Rauber and Rünger take up these recent developments in processor architecture by giving detailed descriptions of parallel programming techniques that are necessary for developing efficient programs for multicore processors as well as for parallel cluster systems and supercomputers. Their book is structured in three main parts, covering all areas of parallel computing: the architecture of parallel systems, parallel programming models and environments, and the implementation of efficient application algorithms. The emphasis lies on parallel programming techniques needed for different architectures. For this second edition, all chapters have been carefully revised. The chapter on architecture of parallel systems has been updated considerably, with a greater emphasis on the architecture of multicore systems and adding new material on the latest developments in computer architecture. Lastly, a completely new chapter on general-purpose GPUs and the corresponding programming techniques has been added. The main goal of the book is to present parallel programming techniques that can be used in many situations for a broad range of application areas and which enable the reader to develop correct and efficient parallel programs. Many examples and exercises are provided to show how to apply the techniques. The book can be used as both a textbook for students and a reference book for professionals. The material presented has been used for courses in parallel programming at different universities for many years.
Download or read book Parallel Computer Architecture written by David Culler and published by Gulf Professional Publishing. This book was released on 1999 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines a set of issues that are critical to all of parallel architecture--communication latency, communication bandwidth, and coordination of cooperative work (across modern designs). It describes the set of techniques available in hardware and in software to address each issues and explore how the various techniques interact.
Download or read book Programming Massively Parallel Processors written by David B. Kirk and published by Newnes. This book was released on 2012-12-31 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming Massively Parallel Processors: A Hands-on Approach, Second Edition, teaches students how to program massively parallel processors. It offers a detailed discussion of various techniques for constructing parallel programs. Case studies are used to demonstrate the development process, which begins with computational thinking and ends with effective and efficient parallel programs. This guide shows both student and professional alike the basic concepts of parallel programming and GPU architecture. Topics of performance, floating-point format, parallel patterns, and dynamic parallelism are covered in depth. This revised edition contains more parallel programming examples, commonly-used libraries such as Thrust, and explanations of the latest tools. It also provides new coverage of CUDA 5.0, improved performance, enhanced development tools, increased hardware support, and more; increased coverage of related technology, OpenCL and new material on algorithm patterns, GPU clusters, host programming, and data parallelism; and two new case studies (on MRI reconstruction and molecular visualization) that explore the latest applications of CUDA and GPUs for scientific research and high-performance computing. This book should be a valuable resource for advanced students, software engineers, programmers, and hardware engineers. New coverage of CUDA 5.0, improved performance, enhanced development tools, increased hardware support, and more Increased coverage of related technology, OpenCL and new material on algorithm patterns, GPU clusters, host programming, and data parallelism Two new case studies (on MRI reconstruction and molecular visualization) explore the latest applications of CUDA and GPUs for scientific research and high-performance computing
Download or read book Parallel Computing written by Eduard L Lafferty and published by William Andrew. This book was released on 2012-12-02 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel Computing
Download or read book Distributed and Parallel Systems written by Péter Kacsuk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed and Parallel Systems: From Instruction Parallelism to Cluster Computing is the proceedings of the third Austrian-Hungarian Workshop on Distributed and Parallel Systems organized jointly by the Austrian Computer Society and the MTA SZTAKI Computer and Automation Research Institute. This book contains 18 full papers and 12 short papers from 14 countries around the world, including Japan, Korea and Brazil. The paper sessions cover a broad range of research topics in the area of parallel and distributed systems, including software development environments, performance evaluation, architectures, languages, algorithms, web and cluster computing. This volume will be useful to researchers and scholars interested in all areas related to parallel and distributed computing systems.
Download or read book An Introduction to Parallel Programming written by Peter Pacheco and published by Morgan Kaufmann. This book was released on 2021-08-27 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Parallel Programming, Second Edition presents a tried-and-true tutorial approach that shows students how to develop effective parallel programs with MPI, Pthreads and OpenMP.As the first undergraduate text to directly address compiling and running parallel programs on multi-core and cluster architecture, this second edition carries forward its clear explanations for designing, debugging and evaluating the performance of distributed and shared-memory programs while adding coverage of accelerators via new content on GPU programming and heterogeneous programming. New and improved user-friendly exercises teach students how to compile, run and modify example programs. Takes a tutorial approach, starting with small programming examples and building progressively to more challenging examples Explains how to develop parallel programs using MPI, Pthreads and OpenMP programming models A robust package of online ancillaries for instructors and students includes lecture slides, solutions manual, downloadable source code, and an image bank New to this edition: New chapters on GPU programming and heterogeneous programming New examples and exercises related to parallel algorithms
Download or read book Introduction to Parallel Computing written by Ananth Grama and published by Pearson Education. This book was released on 2003 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete source of information on almost all aspects of parallel computing from introduction, to architectures, to programming paradigms, to algorithms, to programming standards. It covers traditional Computer Science algorithms, scientific computing algorithms and data intensive algorithms.
Download or read book Implementing Parallel and Distributed Systems written by Alireza Poshtkohi and published by CRC Press. This book was released on 2023-04-13 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel and distributed systems (PADS) have evolved from the early days of computational science and supercomputers to a wide range of novel computing paradigms, each of which is exploited to tackle specific problems or application needs, including distributed systems, parallel computing, and cluster computing, generally called high-performance computing (HPC). Grid, Cloud, and Fog computing patterns are the most important of these PADS paradigms, which share common concepts in practice. Many-core architectures, multi-core cluster-based supercomputers, and Cloud Computing paradigms in this era of exascale computers have tremendously influenced the way computing is applied in science and academia (e.g., scientific computing and large-scale simulations). Implementing Parallel and Distributed Systems presents a PADS infrastructure known as Parvicursor that can facilitate the construction of such scalable and high-performance parallel distributed systems as HPC, Grid, and Cloud Computing. This book covers parallel programming models, techniques, tools, development frameworks, and advanced concepts of parallel computer systems used in the construction of distributed and HPC systems. It specifies a roadmap for developing high-performance client-server applications for distributed environments and supplies step-by-step procedures for constructing a native and object-oriented C++ platform. FEATURES: Hardware and software perspectives on parallelism Parallel programming many-core processors, computer networks and storage systems Parvicursor.NET Framework: a partial, native, and cross-platform C++ implementation of the .NET Framework xThread: a distributed thread programming model by combining thread-level parallelism and distributed memory programming models xDFS: a native cross-platform framework for efficient file transfer Parallel programming for HPC systems and supercomputers using message passing interface (MPI) Focusing on data transmission speed that exploits the computing power of multicore processors and cutting-edge system-on-chip (SoC) architectures, it explains how to implement an energy-efficient infrastructure and examines distributing threads amongst Cloud nodes. Taking a solid approach to design and implementation, this book is a complete reference for designing, implementing, and deploying these very complicated systems.
Download or read book Parallel and High Performance Computing written by Robert Robey and published by Simon and Schuster. This book was released on 2021-06-22 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex calculations, like training deep learning models or running large-scale simulations, can take an extremely long time. Efficient parallel programming can save hours--or even days--of computing time. Parallel and High Performance Computing shows you how to deliver faster run-times, greater scalability, and increased energy efficiency to your programs by mastering parallel techniques for multicore processor and GPU hardware. about the technology Modern computing hardware comes equipped with multicore CPUs and GPUs that can process numerous instruction sets simultaneously. Parallel computing takes advantage of this now-standard computer architecture to execute multiple operations at the same time, offering the potential for applications that run faster, are more energy efficient, and can be scaled to tackle problems that demand large computational capabilities. But to get these benefits, you must change the way you design and write software. Taking advantage of the tools, algorithms, and design patterns created specifically for parallel processing is essential to creating top performing applications. about the book Parallel and High Performance Computing is an irreplaceable guide for anyone who needs to maximize application performance and reduce execution time. Parallel computing experts Robert Robey and Yuliana Zamora take a fundamental approach to parallel programming, providing novice practitioners the skills needed to tackle any high-performance computing project with modern CPU and GPU hardware. Get under the hood of parallel computing architecture and learn to evaluate hardware performance, scale up your resources to tackle larger problem sizes, and deliver a level of energy efficiency that makes high performance possible on hand-held devices. When you''re done, you''ll be able to build parallel programs that are reliable, robust, and require minimal code maintenance. This book is unique in its breadth, with discussions of parallel algorithms, techniques to successfully develop parallel programs, and wide coverage of the most effective languages for the CPU and GPU. The programming paradigms include MPI, OpenMP threading, and vectorization for the CPU. For the GPU, the book covers OpenMP and OpenACC directive-based approaches and the native-based CUDA and OpenCL languages. what''s inside Steps for planning a new parallel project Choosing the right data structures and algorithms Addressing underperforming kernels and loops The differences in CPU and GPU architecture about the reader For experienced programmers with proficiency in a high performance computing language such as C, C++, or Fortran. about the authors Robert Robey has been active in the field of parallel computing for over 30 years. He works at Los Alamos National Laboratory, and has previously worked at the University of New Mexico, where he started up the Albuquerque High Performance Computing Center. Yuliana Zamora has lectured on efficient programming of modern hardware at national conferences, based on her work developing applications running on tens of thousands of processing cores and the latest GPU architectures.
Download or read book Encyclopedia of Parallel Computing written by David Padua and published by Springer Science & Business Media. This book was released on 2011-09-08 with total page 2211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 300 entries in an A-Z format, the Encyclopedia of Parallel Computing provides easy, intuitive access to relevant information for professionals and researchers seeking access to any aspect within the broad field of parallel computing. Topics for this comprehensive reference were selected, written, and peer-reviewed by an international pool of distinguished researchers in the field. The Encyclopedia is broad in scope, covering machine organization, programming languages, algorithms, and applications. Within each area, concepts, designs, and specific implementations are presented. The highly-structured essays in this work comprise synonyms, a definition and discussion of the topic, bibliographies, and links to related literature. Extensive cross-references to other entries within the Encyclopedia support efficient, user-friendly searchers for immediate access to useful information. Key concepts presented in the Encyclopedia of Parallel Computing include; laws and metrics; specific numerical and non-numerical algorithms; asynchronous algorithms; libraries of subroutines; benchmark suites; applications; sequential consistency and cache coherency; machine classes such as clusters, shared-memory multiprocessors, special-purpose machines and dataflow machines; specific machines such as Cray supercomputers, IBM’s cell processor and Intel’s multicore machines; race detection and auto parallelization; parallel programming languages, synchronization primitives, collective operations, message passing libraries, checkpointing, and operating systems. Topics covered: Speedup, Efficiency, Isoefficiency, Redundancy, Amdahls law, Computer Architecture Concepts, Parallel Machine Designs, Benmarks, Parallel Programming concepts & design, Algorithms, Parallel applications. This authoritative reference will be published in two formats: print and online. The online edition features hyperlinks to cross-references and to additional significant research. Related Subjects: supercomputing, high-performance computing, distributed computing
Download or read book Programming Massively Parallel Processors written by David Kirk and published by Springer. This book was released on 2010-10-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking textbook teaches readers how to program massively parallel processors to achieve high performance, and the approach does not require a great deal of hardware expertise. The presentation focuses on computational thinking techniques that enable readers to think about problems in ways that are amenable to parallel computing. Students will learn to complete a suite of API programming tools and techniques at least once, so that they will be able to apply the experience to other APIs and other tools in the future. This book teaches parallel programming for correct functionality and dependability, which constitute a subtle issue in parallel computing. Those who have worked on parallel systems in the past know that achieving initial performance is not enough. The challenge is to achieve it in such a way that you can later debug the code, reproduce the bugs when they reappear, and support the code. This book shows that with the CUDA programming model, which focuses on data parallelism, one can achieve both high-performance and high-reliability in their applications.
Download or read book High Performance Parallel Runtimes written by Michael Klemm and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-02-08 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the theoretical and practical aspects of parallel programming systems for today's high performance multi-core processors and discusses the efficient implementation of key algorithms needed to implement parallel programming models. Such implementations need to take into account the specific architectural aspects of the underlying computer architecture and the features offered by the execution environment. This book briefly reviews key concepts of modern computer architecture, focusing particularly on the performance of parallel codes as well as the relevant concepts in parallel programming models. The book then turns towards the fundamental algorithms used to implement the parallel programming models and discusses how they interact with modern processors. While the book will focus on the general mechanisms, we will mostly use the Intel processor architecture to exemplify the implementation concepts discussed but will present other processor architectures where appropriate. All algorithms and concepts are discussed in an easy to understand way with many illustrative examples, figures, and source code fragments. The target audience of the book is students in Computer Science who are studying compiler construction, parallel programming, or programming systems. Software developers who have an interest in the core algorithms used to implement a parallel runtime system, or who need to educate themselves for projects that require the algorithms and concepts discussed in this book will also benefit from reading it. You can find the source code for this book at https://github.com/parallel-runtimes/lomp.
