Download or read book Proceedings of the 2nd International Conference on Developments in Valves and Actuators for Fluid Control written by Peter Wood and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The flow of two-phase mixtures through restrictions. is a complex phenomenon that to date has not been fully described analytically. It is an area that received a geat deal of attention because of its application to nuclear reactor technology. The majority of the work done in this area considered ideal geometries such as nozzles, orifices and straight pipes. In the area of control valves very little work has been done. Brockett & King [1] studied subcooled water. Stiles [2] looked at subcooled freon. Martinec [4] compared subcooled freon in valves with ideal geometries. Sheldon & Schuder [3) looked experimentally at airjwater mixtures through valves that resulted in a sizing procedure. Fagerlund [10] presented an analytical model that required use of the Sheldon & Schuder data to establish the behavior of valves as opposed to more ideal geometries. However, the data used was limited to a single valve travel. Fagerlund & Storer [11] have expanded this to include several valve travels that further generalizes the technique. It is the intent of this paper to summarize a practical approach to s1z1ng valves for two-phase service that may be reduced to either a graphical or calculator procedure. Discussion of Analysis A fundamental assumption in this method is that the quality remains constant between the inlet and the vena contracta. For gas-liquid flows it is obvious providing vaporization does not occur.
Download or read book Papers Presented at the International Conference on Developments in Valves Actuators for Fluid Control Oxford England 10 12 September 1985 written by Rosemary Pickford and published by Air Science Company. This book was released on 1985 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Valves and Actuators for Fluid Control written by D. R. Airey and published by . This book was released on 1990 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Field Exploration and Development Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2020-07-11 with total page 3907 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 8th International Field Exploration and Development Conference (IFEDC 2019) and addresses a broad range of topics, including: Low Permeability Reservoir, Unconventional Tight & Shale Oil Reservoir, Unconventional Heavy Oil and Coal Bed Gas, Digital and Intelligent Oilfield, Reservoir Dynamic Analysis, Oil and Gas Reservoir Surveillance and Management, Oil and Gas Reservoir Evaluation and Modeling, Drilling and Production Operation, Enhancement of Recovery, Oil and Gas Reservoir Exploration. The conference not only provided a platform to exchange experiences, but also promoted the advancement of scientific research in oil & gas exploration and production. The book is chiefly intended for industry experts, professors, researchers, senior engineers, and enterprise managers.
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 1979 with total page 1706 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Journal of Fluid Control written by and published by . This book was released on 1987 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Trends in Computer Science and Mechanical Automation Vol 1 written by Shawn X. Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-03-30 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd International Conference on Computer Science and Mechanical Automation carried on the success from last year and received overwhelming support from the research community as evidenced by the number of high quality submissions. The conference accepted articles through rigorous peer review process. We are grateful to the contributions of all the authors. For those who have papers appear in this collection, we thank you for your great effort that makes this conference a success and the volume of this proceeding worth reading. For those whose papers were not accepted, we assure you that your support is very much appreciated. The papers in this proceeding represent a broad spectrum of research topics and reveal some cutting-edge developments. Chapter 1 and 2 contain articles in the areas of computer science and information technology. The articles in Chapter 1 focus on algorithm and system development in big data, data mining, machine learning, cloud computing, security, robotics, Internet of Things, and computer science education. The articles in Chapter 2 cover image processing, speech recognition, sound event recognition, music classification, collaborative learning, e-government, as well as a variety of emerging new areas of applications. Some of these papers are especially eye-opening and worth reading. Chapter 3 and 4 contain papers in the areas of sensors, instrument and measurement. The articles in Chapter 3 cover mostly navigation systems, unmanned air vehicles, satellites, geographic information systems, and all kinds of sensors that are related to location, position, and other geographic information. The articles in Chapter 4 are about sensors and instruments that are used in areas like temperature and humidity monitoring, medical instruments, biometric sensors, and other sensors for security applications. Some of these papers are concerned about highly critical systems such as nuclear environmental monitoring and object tracking for satellite videos. Chapter 5 and 6 contain papers in the areas of mechatronics and electrical engineering. The articles in Chapter 5 cover mostly mechanical design for a variety of equipment, such as space release devices, box girder, shovel loading machines, suspension cables, grinding and polishing machines, gantry milling machines, clip type passive manipulator, hot runner systems, water hydraulic pump/motor, and turbofan engines. The articles in Chapter 6 focus on mechanical and automation devices in power systems as well as automobiles and motorcycles. This collection of research papers showcases the incredible accomplishments of the authors. In the meantime, they once again prove that the International Conference on Computer Science and Mechanical Automation is a highly valuable platform for the research community to share ideas and knowledge. Organization of an international conference is a huge endeavor that demands teamwork. We very much appreciate everyone who is involved in the organization, especially the reviewers. We are looking forward to another successful conference next year.
Download or read book Index of Conference Proceedings Received written by British Library. Lending Division and published by . This book was released on 1988-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paperbound Books in Print written by and published by . This book was released on 1992 with total page 1624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index of Conference Proceedings written by and published by . This book was released on 1995 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Reliable Systems Engineering ICoRSE 2023 written by Daniela Doina Cioboată and published by Springer Nature. This book was released on 2023-09-04 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises state-of-the-art research results in the field of mechatronics and other closely related areas and that will be presented on occasion of the third “International Conference of Reliable Systems Engineering (ICoRSE 2023)” that will take place in Bucharest, Romania, between 07–08 September 2023. The first two ICoRSE editions brought together professors, Ph.D. students, and researchers in Europe, North America, and Asia, in countries such as: England, Albania, Austria, Bulgaria, Canada, Czech Republic, Germany, France, Italy, Portugal, Turkey, Ukraine, Uzbekistan, and Vietnam. In this year’s edition of the conference, we have benefitted from the inclusion in the scientific committee of the conference of professors in all of these countries, and we cover a wide variety of topics, such as: theoretical and applied mechanics; cyber-physical systems, robotics, smart bio-medical and bio-mechatronic systems, new and intelligent materials and structures, modelling and simulation in mechanics and mechatronics, smart mechatronic production and control system, optics, control systems, big data modelling, micro- and nanotechnology, automation, manufacturing optimization, and other. Since the book ́s chapters represent contributions of scholars who work in both state-funded institutions and in the business environment, they reflect a clear picture of the novelties attained in the leading-edge sciences that are in the scope of the conference. It is our belief that the book is useful to both students and researchers in all areas of engineering, who will each find at least one topic worthy of their interest in this work.
Download or read book Proceedings of the ASME JSME Joint Fluids Engineering Conference written by and published by . This book was released on 2003 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Industry 4 0 Technologies and Applications written by Nikolaos Papakostas and published by MDPI. This book was released on 2020-11-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industry 4.0 paradigm has led to the creation of new opportunities for taking advantage of a set of diverse technologies in the manufacturing domain. This book touches on a series of advanced technologies and research fields, including Internet of Things, Augmented and Virtual Reality, Machine Learning, Advanced Robotics, Additive Manufacturing, System and Process Simulation, Computer-Aided Design/Engineering/Manufacturing/Process Planning Systems as well as Product Lifecycle Management Platforms. The topics covered span a series of diverse areas related to a) product design and development, b) manufacturing systems and operations, c) process engineering, and d) Industry 4.0 technologies review and realization.
Download or read book Fluid structure Interaction 1996 written by C. Y. Wang and published by . This book was released on 1996 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some 30 papers (from a symposium of the July 1996 conference) discuss fluid-structure interaction and structural mechanics; sloshing and fluid-structure interaction; and transient thermal hydraulics, heat transfer, and coupled vessel-piping structural response. No index. Annotation c. by Book News,
Download or read book Paper Technology and Industry written by and published by . This book was released on 1987 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum Review written by and published by . This book was released on 1996 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt:
