Download or read book Surfaces and Interfaces of Electronic Materials written by Leonard J. Brillson and published by John Wiley & Sons. This book was released on 2012-06-26 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural properties of electronic materials, including semiconductors, insulators, nanostructures, and organics. The essential physics and chemistry underlying each technique is described in sufficient depth with references to the most authoritative sources for more exhaustive discussions, while numerous examples are provided throughout to illustrate the applications of each technique. With its general reading lists, extensive citations to the text, and problem sets appended to all chapters, this is ideal for students of electrical engineering, physics and materials science. It equally serves as a reference for physicists, material science and electrical and electronic engineers involved in surface and interface science, semiconductor processing, and device modeling and design. This is a coproduction of Wiley and IEEE * Free solutions manual available for lecturers at www.wiley-vch.de/supplements/
Download or read book Materials for Lithium Ion Batteries written by Christian Julien and published by Springer Science & Business Media. This book was released on 2000-10-31 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: A lithium-ion battery comprises essentially three components: two intercalation compounds as positive and negative electrodes, separated by an ionic-electronic electrolyte. Each component is discussed in sufficient detail to give the practising engineer an understanding of the subject, providing guidance on the selection of suitable materials in actual applications. Each topic covered is written by an expert, reflecting many years of experience in research and applications. Each topic is provided with an extensive list of references, allowing easy access to further information. Readership: Research students and engineers seeking an expert review. Graduate courses in electrical drives can also be designed around the book by selecting sections for discussion. The coverage and treatment make the book indispensable for the lithium battery community.
Download or read book Solid State Spectroscopy written by Hans Kuzmany and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introductory compilation of basic concepts, methods and applications in the field of spectroscopy. It discusses new radiation sources such as lasers and synchrotrons and describes the linear response together with the basic principles and the technical background for various scattering experiments.
Download or read book An Essential Guide to Electronic Material Surfaces and Interfaces written by Leonard J. Brillson and published by John Wiley & Sons. This book was released on 2016-08-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Essential Guide to Electronic Material Surfaces and Interfaces is a streamlined yet comprehensive introduction that covers the basic physical properties of electronic materials, the experimental techniques used to measure them, and the theoretical methods used to understand, predict, and design them. Starting with the fundamental electronic properties of semiconductors and electrical measurements of semiconductor interfaces, this text introduces students to the importance of characterizing and controlling macroscopic electrical properties by atomic-scale techniques. The chapters that follow present the full range of surface and interface techniques now being used to characterize electronic, optical, chemical, and structural properties of electronic materials, including semiconductors, insulators, nanostructures, and organics. The essential physics and chemistry underlying each technique is described in sufficient depth for students to master the fundamental principles, with numerous examples to illustrate the strengths and limitations for specific applications. As well as references to the most authoritative sources for broader discussions, the text includes internet links to additional examples, mathematical derivations, tables, and literature references for the advanced student, as well as professionals in these fields. This textbook fills a gap in the existing literature for an entry-level course that provides the physical properties, experimental techniques, and theoretical methods essential for students and professionals to understand and participate in solid-state electronics, physics, and materials science research. An Essential Guide to Electronic Material Surfaces and Interfaces is an introductory-to-intermediate level textbook suitable for students of physics, electrical engineering, materials science, and other disciplines. It is essential reading for any student or professional engaged in surface and interface research, semiconductor processing, or electronic device design.
Download or read book Compendium of Surface and Interface Analysis written by The Surface Science Society of Japan and published by Springer. This book was released on 2018-02-19 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concisely illustrates the techniques of major surface analysis and their applications to a few key examples. Surfaces play crucial roles in various interfacial processes, and their electronic/geometric structures rule the physical/chemical properties. In the last several decades, various techniques for surface analysis have been developed in conjunction with advances in optics, electronics, and quantum beams. This book provides a useful resource for a wide range of scientists and engineers from students to professionals in understanding the main points of each technique, such as principles, capabilities and requirements, at a glance. It is a contemporary encyclopedia for selecting the appropriate method depending on the reader's purpose.
Download or read book Polymeric and Self Assembled Hydrogels written by Xian Jun Loh and published by Royal Society of Chemistry. This book was released on 2013 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book to give a complete picture of current hydrogel research, covering all the major applications as well as the fundamental principles behind them.
Download or read book Metal semiconductor Contacts written by E. H. Rhoderick and published by Oxford University Press, USA. This book was released on 1988 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition brings a greatly expanded treatment of the physics of Schottky-barrier formation to its comprehensive discussion of modern semiconductor technology. Topics covered include the current/voltage relationship, the capacitance of rectifying contacts, and practical methods of fabricating contacts. Written for semiconductor technologists and physicists engaged in research on semiconductor interfaces, this text emphasizes practical implications wherever they are relevant to device technology.
Download or read book Molecular Beam Epitaxy written by John Wilfred Orton and published by . This book was released on 2015 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a history of Molecular Beam Epitaxy (MBE) as applied to the growth of semiconductor thin films (note that it does not cover the subject of metal thin films). It begins by examining the origins of MBE, first of all looking at the nature of molecular beams and considering their application to fundamental physics, to the development of nuclear magnetic resonance and to the invention of the microwave MASER. It shows how molecular beams of silane (SiH4) were used to study the nucleation of silicon films on a silicon substrate and how such studies were extended to compound semiconductors such as GaAs. From such surface studies in ultra-high vacuum the technique developed into a method of growing high quality single crystal films of a wide range of semiconductors. Comparing this with earlier evaporation methods of deposition and with other epitaxial deposition methods such as liquid phase and vapour phase epitaxy (LPE and VPE). The text describes the development of MBE machines from the early 'home-made' variety to that of commercial equipment and show how MBE was gradually refined to produce high quality films with atomic dimensions. This was much aided by the use of various in-situ surface analysis techniques, such as reflection high energy electron diffraction (RHEED) and mass spectrometry, a feature unique to MBE. It looks at various modified versions of the basic MBE process, then proceed to describe their application to the growth of so-called 'low-dimensional structures' (LDS) based on ultra-thin heterostructure films with thickness of order a few molecular monolayers. Further chapters cover the growth of a wide range of different compounds and describe their application to fundamental physics and to the fabrication of electronic and opto-electronic devices. The authors study the historical development of all these aspects and emphasise both the (often unexpected) manner of their discovery and development and the unique features which MBE brings to the growth of extremely complex structures with monolayer accuracy.
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book Zinc Oxide written by Claus F. Klingshirn and published by Springer Science & Business Media. This book was released on 2010-07-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a comprehensive review of the present state-of-the-art in ZnO R+D, including growth, doping, lattice dynamics, electric magnetic and optical properties. The emphasis is on the electric and optical properties, because this is the area where novel applications may be expected with highest promise. The book highlights not only the most recent results but gives both an overview of past research and of the present status -- not avoiding critical and controversial discussions of various aspects such as bank symmetries and laser processes. Intended to have long-lasting impact on ZnO R+D, this monograph addresses (post-)graduate students but also advanced scientists, who want to embark on ZnO research or are already involved, the present state of the art and assists them in avoiding duplication of old results (or mistakes).
Download or read book Gallium Oxide written by Masataka Higashiwaki and published by Springer Nature. This book was released on 2020-04-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the new wide-bandgap semiconductor gallium oxide (Ga2O3). Ga2O3 has been attracting much attention due to its excellent materials properties. It features an extremely large bandgap of greater than 4.5 eV and availability of large-size, high-quality native substrates produced from melt-grown bulk single crystals. Ga2O3 is thus a rising star among ultra-wide-bandgap semiconductors and represents a key emerging research field for the worldwide semiconductor community. Expert chapters cover physical properties, synthesis, and state-of-the-art applications, including materials properties, growth techniques of melt-grown bulk single crystals and epitaxial thin films, and many types of devices. The book is an essential resource for academic and industry readers who have an interest in, or plan to start, a new R&D project related to Ga2O3.
Download or read book Ohmic Contacts to Semiconductors written by Electrochemical Society and published by . This book was released on 1969 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics of Semiconductor Devices written by Simon M. Sze and published by John Wiley & Sons. This book was released on 2021-03-03 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of the most detailed and comprehensive single-volume reference on major semiconductor devices The Fourth Edition of Physics of Semiconductor Devices remains the standard reference work on the fundamental physics and operational characteristics of all major bipolar, unipolar, special microwave, and optoelectronic devices. This fully updated and expanded edition includes approximately 1,000 references to original research papers and review articles, more than 650 high-quality technical illustrations, and over two dozen tables of material parameters. Divided into five parts, the text first provides a summary of semiconductor properties, covering energy band, carrier concentration, and transport properties. The second part surveys the basic building blocks of semiconductor devices, including p-n junctions, metal-semiconductor contacts, and metal-insulator-semiconductor (MIS) capacitors. Part III examines bipolar transistors, MOSFETs (MOS field-effect transistors), and other field-effect transistors such as JFETs (junction field-effect-transistors) and MESFETs (metal-semiconductor field-effect transistors). Part IV focuses on negative-resistance and power devices. The book concludes with coverage of photonic devices and sensors, including light-emitting diodes (LEDs), solar cells, and various photodetectors and semiconductor sensors. This classic volume, the standard textbook and reference in the field of semiconductor devices: Provides the practical foundation necessary for understanding the devices currently in use and evaluating the performance and limitations of future devices Offers completely updated and revised information that reflects advances in device concepts, performance, and application Features discussions of topics of contemporary interest, such as applications of photonic devices that convert optical energy to electric energy Includes numerous problem sets, real-world examples, tables, figures, and illustrations; several useful appendices; and a detailed solutions manual for Instructor's only Explores new work on leading-edge technologies such as MODFETs, resonant-tunneling diodes, quantum-cascade lasers, single-electron transistors, real-space-transfer devices, and MOS-controlled thyristors Physics of Semiconductor Devices, Fourth Edition is an indispensable resource for design engineers, research scientists, industrial and electronics engineering managers, and graduate students in the field.
Download or read book Injection Phenomena written by Robert K. Willardson and published by . This book was released on 1966 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: SEMICONDUCTORS & amp; SEMIMETALS V6.
Download or read book Chemically Derived Graphene written by Jintao Zhang and published by Royal Society of Chemistry. This book was released on 2018-05-10 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing interest in graphene, due to its unique properties and potential applications, is sparking intense research into chemically derived graphene. This book provides a comprehensive overview of the recent and state-of-the-art research on chemically derived graphene materials for different applications. Starting with a brief introduction on chemically derived graphene, subsequent chapters look at various fascinating applications such as electrode materials for fuel cells, Li/Na-ion batteries, metal–air batteries and Li-S batteries, photocatalysts for degradation of pollutants and solar-to-fuels conversion, biosensing platforms, and anti-corrosion coatings. The emphasis throughout this book is on experimental studies and the unique aspects of chemically derived graphene in these fields, including novel functionalization methods, particular physicochemical properties and consequently enhanced performance. With contributions from key researchers, the book provides a detailed resource on the latest progress and the future directions of chemically derived graphene for students and researchers across materials science, chemistry, nanoengineering and related fields.
Download or read book Lecture Notes on Principles of Plasma Processing written by Francis F. Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma processing of semiconductors is an interdisciplinary field requiring knowledge of both plasma physics and chemical engineering. The two authors are experts in each of these fields, and their collaboration results in the merging of these fields with a common terminology. Basic plasma concepts are introduced painlessly to those who have studied undergraduate electromagnetics but have had no previous exposure to plasmas. Unnecessarily detailed derivations are omitted; yet the reader is led to understand in some depth those concepts, such as the structure of sheaths, that are important in the design and operation of plasma processing reactors. Physicists not accustomed to low-temperature plasmas are introduced to chemical kinetics, surface science, and molecular spectroscopy. The material has been condensed to suit a nine-week graduate course, but it is sufficient to bring the reader up to date on current problems such as copper interconnects, low-k and high-k dielectrics, and oxide damage. Students will appreciate the web-style layout with ample color illustrations opposite the text, with ample room for notes. This short book is ideal for new workers in the semiconductor industry who want to be brought up to speed with minimum effort. It is also suitable for Chemical Engineering students studying plasma processing of materials; Engineers, physicists, and technicians entering the semiconductor industry who want a quick overview of the use of plasmas in the industry.
Download or read book Electrochemical Immunosensors and Aptasensors written by Paolo Ugo and published by MDPI. This book was released on 2018-03-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Electrochemical Immunosensors and Aptasensors" that was published in Chemosensors
