Download or read book Outline of spallation neutron source engineering written by Noboru Watanabe and published by . This book was released on 2001 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AN OVERVIEW OF THE SNS ACCELERATOR MECHANICAL ENGINEERING written by C. PEARSON and published by . This book was released on 2006 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Spallation Neutron Source (SNS*) is an accelerator-based neutron source currently nearing completion at Oak Ridge National Laboratory. When completed in 2006, the SNS will provide a 1 GeV, 1.44 MW proton beam to a liquid mercury target for neutron production. SNS is a collaborative effort between six U.S. Department of Energy national laboratories and offered a unique opportunity for the mechanical engineers to work with their peers from across the country. This paper presents an overview of the overall success of the collaboration concentrating on the accelerator ring mechanical engineering along with some discussion regarding the relative merits of such a collaborative approach. Also presented are a status of the mechanical engineering installation and a review of the associated installation costs.
Download or read book Mechanical Engineering of the Linac for the Spallation Neutron Source written by and published by . This book was released on 1999 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The linac for the Spallation Neutron Source (SNS) Project will accelerate an average current of 1 mA of H− ions from 20 MeV to 1GeV for injection into an accumulator ring. The linac will be an intense source of H− ions and as such requires advanced design techniques to meet project technical goals as well as to minimize costs. The DTL, CCDTL and CCL are 466m long and operate at 805 MHz with a maximum H− input current of 28 mA and 7% rf duty factor. The Drift Tube Linac is a copper-plated steel structure using permanent magnetic quadrupoles. The Coupled-Cavity portions are brazed copper structures and use electromagnetic quads. RF losses in the copper are 80 MW, with total rf power supplied by 52 klystrons. Additionally, the linac is to be upgraded to the 2- and 4-MW beam power levels with no increase in duty factor. The authors give an overview of the linac mechanical engineering effort and discuss the special challenges and status of the effort.
Download or read book Overview of Target Systems for the Spallation Neutron Source written by and published by . This book was released on 1997 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose and requirements of target systems as well as the technologies that are being utilized to design and build a state-of-the-art neutron spallation source, the Spallation Neutron Source (SNS), are discussed. Emphasis is given to the technology issues that present the greatest scientific challenges. The present facility configuration, ongoing analysis, and the planned hardware research and development program are also described.
Download or read book Outline Design of the European Spallation Neutron Source written by Ian Gardner and published by . This book was released on 1995 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Overview of the Target Systems for the Spallation Neutron Source written by and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technologies that are being utilized to design and build the target systems for a state-of-the-art accelerator- based neutron source, the Spallation Neutron Source (SNS), are discussed. Emphasis is given to the technology issues that present the greatest challenges. The present facility configuration, ongoing analysis, and planned research and development program are also described.
Download or read book Overview of the National Spallation Neutron Source with Emphasis on the Target Station written by and published by . This book was released on 1997 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technologies that are being utilized to design and build a state-of-the-art neutron spallation source, the National Spallation Neutron Source (NSNS), are discussed. Emphasis is given to the technology issues that present the greatest scientific challenges. The present facility configuration, ongoing analysis and the planned hardware research and development program are also described.
Download or read book Construction and Operation of the Spallation Neutron Source TN NY IL NM written by and published by . This book was released on 1999 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The National Spallation Neutron Source Target Station written by and published by . This book was released on 1997 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technologies that are being utilized to design and build a state-of-the-art neutron spallation source, the National Spallation Neutron Source (NSNS), are discussed. Emphasis is given to the technology issues that present the greatest scientific challenges. The present facility configuration, ongoing analysis and the planned hardware research and development program are also described.
Download or read book Outline Design of Rings for a European Spallation Neutron Source written by and published by . This book was released on 1994 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Program Summary Department of Materials Sciences and Engineering Lawrence Berkeley National Laboratory written by and published by DIANE Publishing. This book was released on with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Spallation Research written by Detlef Filges and published by Wiley-VCH. This book was released on 2010-02-01 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed and comprehensive reference to spallation -- from the foundations to the latest applications is the only work of its kind and is written by two internationally renowned researchers. Clearly divided into three parts, it begins with the basic principles, while the second part describes the proton-nucleus and proton-matter experiments so-called thin and thick target experiments in terms of secondary particle production as hadrons, pions, muons, photons, electrons, light and intermediate masses, isotope production, heating and energy deposition and materials damage. Many of the experiments are associated with studies, investigations and the construction of spallation neutron sources since 1975 with emphasis on the most recent developments. The final part on technology and applications describes the various engineering problems associated with high intensity neutron spallation sources, ATW's, the needed accelerator systems, material and neutron issues, and high energy neutron source shielding aspects. A must-have for engineers and physicists working in or entering this field.
Download or read book An Overview of an Accelerator based Neutron Spallation Source written by and published by . This book was released on 1996 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the feasibility study of a 1-MW pulsed spallation source is presented. The machine delivers 1 MW of proton beam power to spallation targets where slow neutrons are produced. The slow neutrons can be used for isotope production, materials irradiation, and neutron scattering research. The neutron source facility is based on a rapid cycling synchrotron (RCS) and consists of a 400-MeV linac, a 30-Hz RCS that accelerates the 400-MeV beam to 2 GeV, and two neutron-generating target stations. The RCS accelerates an average proton beam current of 0.5 mA, corresponding to 1.04 x 1014 protons per pulse. This intensity is about two times higher than that of existing machines. A key feature of this accelerator system design is that beam losses are minimized from injection to extraction, reducing activation to levels consistent with hands-on maintenance.
Download or read book Research Program Summary Department of Materials Sciences and Engineering Ames Laboratory written by and published by DIANE Publishing. This book was released on with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF Linear Accelerators written by Thomas P. Wangler and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses einschlägige Lehrbuch, entwickelt auf der Grundlage der Ausbildung an der US Particle Accelerator School, schließt eine Lücke in der verfügbaren Literatur zum Thema Hochfrequenz-Linearbeschleuniger, kurz RF-Linac. Nach einer Erläuterung der naturwissenschaftlichen Grundlagen und der neuesten technologischen Eckdaten stellt diese zweite Auflage neueste RF-Linacs, spezialisierte Systeme, Systeme mit Supraleitern und verschiedene Spezialverfahren vor. Übungsaufgaben an den Kapitelenden erleichtern das Einprägen und das Nacharbeiten von Vorlesungen.
Download or read book Proposal for a spallation neutron facility written by and published by . This book was released on 1976 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Slow Neutron Scattering written by J. M. Carpenter and published by Cambridge University Press. This book was released on 2015-09-24 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and up-to-date introduction to the fundamental theory and applications of slow-neutron scattering.
