Download or read book Organic Additives and Ceramic Processing written by Daniel J. Shanefield and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Additives and Ceramic Processing: With Applications in Powder Metallurgy, Ink, and Paint describes the major manufacturing processes, such as slip casting, tape casting, injection molding, etc. The book covers each subject, including the ceramic processes, organic chemical structures, polymers, colloid science and others, starting from fundamental principles, with many literature references for further reading. After the fundamentals, detailed case studies from industrial applications are described for the optimization of solvents, dispersants, binders, plasticizers, lubricants and some minor additives. A wide range of information is covered, beginning with fundamental equations for students, and extending to advanced applications for development workers and factory problem solvers. Shanefield undertook this ambitious task only because of the previous lack of resources that address the growing need for detailed information on organic additives for ceramics. Suitable for use as a textbook and as a reference source for working ceramists and chemists who wish to supply the ceramics industry with additives.
Download or read book Organic Additives and Ceramic Processing Second Edition written by Daniel J. Shanefield and published by Springer. This book was released on 2020-12-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.
Download or read book Organic Additives and Ceramic Processing Second Edition written by Daniel J. Shanefield and published by Springer. This book was released on 1996-09-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is intended to be used as a textbook for teaching pur poses and also as a reference source for working engineers. Therefore, a wide range of subject matter must be covered, starting with funda mental explanations for students, and extending to advanced applica tions for development workers and factory problem-solvers. Such an ambitious task is being attempted only because of the present lack of resources which might otherwise fill the need. The author planned the book for use as the primary text in an un dergraduate course in processing, which he teaches at Rutgers University. However, the book could also be used as a supplementary text for more general courses in related subjects. Powder metallurgy, printing inks, and paints involve many of the same organic additives as ceramic processing. These specialized fields of technology are usually covered somewhat by very general college courses in metallurgy, materials science, and chemical engineering, but there appears to be a need for more specific training in the area of the organic additives used in those fields. The formulators, for lack of confidence and better understanding, often rely on simple waxes or acrylates, when a higher level of technological knowledge could provide improved results. It is intended that this book will be useful as a supplementary source of information for those fields also, both as a self-teaching tool and for college coursework.
Download or read book The Effects of Organic Additives on Ceramic Body Processing written by K. E. Burnfield and published by . This book was released on 1990 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book Handbook of Advanced Ceramics written by David McKinney and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.
Download or read book Ceramic Processing written by M. N. Rahaman and published by . This book was released on 2017 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Handbook of Organic Additives for Use in Ceramic Body Formulation written by Ted Morse and published by . This book was released on 1979 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.
Download or read book Surface and Colloid Chemistry in Advanced Ceramics Processing written by Robert J. Pugh and published by CRC Press. This book was released on 2017-07-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes the importance of surface and colloid chemistry in the manufacture of high-performance ceramics. Examines processing-property relationships, powderproductionandcharacte6zation,the dispersion properties of powders in liquids, the rheology of concentrated suspensions, and the surface and colloid chemistry aspects of the most widely used forming methods.
Download or read book Extrusion in Ceramics written by Frank Händle and published by Springer Science & Business Media. This book was released on 2009-08-12 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frank Handle ̈ 1.1 What to Expect For some time now, I have been toying around with the idea of writing a book about “Ceramic Extrusion”, because to my amazement I have been unable to locate a single existing, comprehensive rundown on the subject – much in contrast to, say, plastic extrusion and despite the fact that there are some outstanding contributions to be found about certain, individual topics, such as those in textbooks by Reed [1], Krause [2], Bender/Handle ̈ [3] et al. By way of analogy to Woody Allen’s wonderfully ironic movie entitled “Eve- thing You Always Wanted to Know about Sex”, I originally intended to call this book “Everything You Always Wanted to Know about Ceramic Extrusion”, but - ter giving it some extra thought, I eventually decided on a somewhat soberer title. Nevertheless, my companion writers and I have done our best – considering our target group and their motives – not to revert to the kind of jargon that people use when they think the less understandable it sounds, the more scienti c it appears. This book addresses all those who are looking for a lot or a little general or selective information about ceramic extrusion and its sundry aspects. We realize that most of our readers will not be perusing this book just for fun or out of intellectual curiosity, but because they hope to get some use out of it for their own endeavours.
Download or read book Ceramic Processing written by Debasish Sarkar and published by CRC Press. This book was released on 2019-06-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive account on the manufacturing techniques to synchronize the desired properties of both traditional and advanced ceramics. Offers exclusive and up to date information on industrial ceramic processing equipment and approaches and discusses actual industrial practices taking a product-oriented approach It should serve as a text to answer the processing of ceramics and achieve targeted product in industrial environment.
Download or read book Advances in Microwave and Radio Frequency Processing written by M. Willert-Porada and published by Springer Science & Business Media. This book was released on 2006-02-09 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prometheus brought fire to mankind Arthur R. von Hippel “Dielectrics and Waves”, 1954 Our contribution? There are only few areas of research and development of a comparable scientific and technological extension as microwave and high frequency processing. “Pr- essing” means not only application of radiation of 300 MHz to 300 GHz f- quency to synthesis, heating or ionisation of matter but also generation, transm- sion and detection of microwave and radio frequency radiation. Microwave and high frequency sources positioned in the orbit are the foun- tion of modern satellite telecommunication systems, gyrotron tubes being pr- ently developed in different countries all over the world will most probably be the major devices to open up a new era of energy supply to mankind be means of - sion plasma. Although initiated by military purposes during the Second World War (RADAR, Radio Detection and Ranging), microwave and high frequency utilisation has spread over almost every important aspect of normal day life since than, from individual mobile phones and kitchen microwave ovens to industrial food processing, production of composites as sustainable building materials, green chemistry, medical applications and finally infrastructure installations like GPS and Galileo, to name only few examples. These different areas of microwave and high frequency radiation application can not be unified within one group of scientists and technologists. There are s- eral distinguished communities active e.g., in the area of telecommunication s- tems, strong microwaves for fusion plasma or plasma based materials processing.
Download or read book Ceramic Membranes written by Vitaly Gitis and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein wichtiges Lehrwerk für ein zunehmend wichtiges Fachgebiet: gelungene Einführung, prägnante Darstellung der Grundlagen der Membranseparation, Überblick über Charakterisierungstechniken für keramische Membranen, industrielle Anwendungen und deren Wirtschaftlichkeit.
Download or read book Ceramics Science and Technology Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.
