Download or read book Optimization of the Design of Open Pit Mining Systems written by Beverly Chew Duer and published by . This book was released on 1962 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design optimization in underground coal systems written by Virginia Polytechnic Institute and State University. Department of Mining and Minerals Engineering and published by . This book was released on 1976 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of the Haulage Cycle Model for Open Pit Mining Using a Discrete Event Simulator and a Context Based Alert System written by Pedro Pablo Vasquez Coronado and published by . This book was released on 2014 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The loading cycle in an Open Pit mine is a critical stage in the production process that needs to be controlled in detail for performance optimization. A comprehensive Alert System designed to notify supervisors of cycle times that are below the required performance standards is proposed. The system gives an alert message when one or several trucks are idle or the time of completing production tasks are over a predefined value. This alert is identified by the system and compared with pre-established Key Performance Indicators (KPIs) in order to determine corrective actions. The goal is to determine the strategies that help the production supervisor to optimize the haulage cycle model. A discrete-event simulator has been built in order to analyze different scenarios for route design and queue analysis. A methodology that utilizes different algorithms has been developed in order to identify the least productive times of the fleet. These results are displayed every time the simulation has finished. This research focuses on the optimization of haulage. However, the system is intended for implementation in subsequent stages of the production process, and the resulting improvement could impact mine planning and management as well. Topographic and drilling exploration data from a mine located hypothetically in the state of Arizona, were used to build a block model and to design an open pit; an Arena-based simulation was used to generate operating cycles that represent actual operations (As-Is model). Once the Alert System is implemented, adjustments were applied, and a new simulation was performed taking into consideration these adjustments (To-Be model), including comparative analysis and statistical results.
Download or read book Handbook of Operations Research in Natural Resources written by Andres Weintraub and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the first systematic handbook treatment of quantitative modeling natural resource problems, their allocated efficient use, and societal and economic impact. Andrés Weintraub is the very top person in Natural Resource research. He has selected co-editors who are at the top of the sub-fields in natural resources: agriculture, fisheries, forestry, and mining. The book covers these areas with contributions from researchers on, among others, modeling natural research problems, quantifying data, and developing algorithms.
Download or read book Design Optimization in Underground Coal Systems Modified FACESIM and COST SCHED programs written by and published by . This book was released on 1981 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Open Pit Mine Planning and Design Two Volume Set Second Edition written by William A. Hustrulid and published by CRC Press. This book was released on 2006-04-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outstanding textbook designed for courses in surface mine design, open pit design, geological excavation engineering and in advanced open pit mine planning and design. The step-by-step introduction to mine design and planning enables a fast-path approach to the matter by undergraduate and graduate students. The excellent, user-friendly software guides the student through the planning and design steps, and the drillhole data sets allows the student to practice the described principles in diverse mining properties case examples. The large number of illustrative examples and case studies, together with the exercises and the reference lists at the end of each chapter, provide the student with all the material needed to study effectively the theory and application methods of open pit mine planning and design. Volume 1 deals with the fundamental concepts involved in the planning and design of open pit mines. Subjects covered are mine planning, mining revenues and costs, orebody description, geometrical considerations, pit limits, production planning, mineral resources and ore reserves, and responsible mining. Volume 2 deals with CSMine, a user-friendly mine planning and design software that was developed specifically to illustrate the principles involved when applied in practice. It includes CSMine software, a CSMine tutorial, a user’s guide and various orebody case examples. Although intended as student course material, many practitioners have used it as a practical reference guide.
Download or read book Mathematical Optimization Models and Methods for Open pit Mining written by and published by . This book was released on 2011 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, we study the open-pit design problem, the open-pit mining scheduling problem, and the open-pit design problem with geological and price uncertainty. These problems give rise to (mixed) discrete optimization models that in real-life settings are large scale and computationally challenging.
Download or read book Design Optimization in Underground Coal Systems A theoretical yield pillar design technique using the finite element method of stress analysis written by and published by . This book was released on 1981 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Optimization in Underground Coal Systems Underground longwall ground control simulator written by and published by . This book was released on 1981 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Open Pit Slope Design written by John Read and published by CSIRO PUBLISHING. This book was released on 2009-11-09 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Open Pit Slope Design is a comprehensive account of the open pit slope design process. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on rock slope stability in open pit mines, this book provides an up-to-date compendium of knowledge of the slope design processes that should be followed and the tools that are available to aid slope design practitioners. This book links innovative mining geomechanics research into the strength of closely jointed rock masses with the most recent advances in numerical modelling, creating more effective ways for predicting rock slope stability and reliability in open pit mines. It sets out the key elements of slope design, the required levels of effort and the acceptance criteria that are needed to satisfy best practice with respect to pit slope investigation, design, implementation and performance monitoring. Guidelines for Open Pit Slope Design comprises 14 chapters that directly follow the life of mine sequence from project commencement through to closure. It includes: information on gathering all of the field data that is required to create a 3D model of the geotechnical conditions at a mine site; how data is collated and used to design the walls of the open pit; how the design is implemented; up-to-date procedures for wall control and performance assessment, including limits blasting, scaling, slope support and slope monitoring; and how formal risk management procedures can be applied to each stage of the process. This book will assist in meeting stakeholder requirements for pit slopes that are stable, in regards to safety, ore recovery and financial return, for the required life of the mine.
Download or read book GLOBAL OPTIMIZATION OF THE OPEN PIT MINING COMPLEX WITH INTEGRATED CUT OFF GRADE OPTIMIZATION UNDER UNCERTAINTY written by and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract : The mining complex refers to an integrated problem where the material is extracted from the mines; the extracted material is passed through a series of processing facilities connected with various material handling methods to generate a set of finished products, which can be sold to the customers. The optimization of the mining complex refers to the simultaneous optimization of the multiple mine production schedules, the destination of the materials, and the method of processing throughout the life of the project. The purpose of optimizing the mining complex is to deal with the effective management of resources and maximize cash flows to generate higher profits over the life of the project. The goal of this dissertation is to develop a global optimization methodology that integrates geological (supply) uncertainty and can manage the risk in the design, mining complex operations, and maximize the cash flows. In this study, a new production schedule approach is presented that integrates geological uncertainty and generate the extraction sequence for the mining complex problem. The extraction sequence is developed to maximize the net present value and provide a consistent quantity of the material to different destinations. To optimize the quantity of materials sent to different destinations, the destination policies are defined based on the cut-off grade optimization and block economic values. This allows to form the destination policies for the mined material into various processing streams and maximize the value of the operation. The production schedule and the destination policies are optimized within a unified solution approach for the mining complex problem. The work presented advances the field through the development of the new model that uses the combination of maximum flow, genetic algorithm, and Lane's method for the global optimization of the mining complex. The method simultaneously optimizes the production schedule and the cut-off grade while considering uncertainty. The performance advantages and limitations are analyzed and tested on real-world examples. The results show that the models reduce the production risks and increase the net present value of the mining operation.
Download or read book Optimization Techniques and their Applications to Mine Systems written by Amit Kumar Gorai and published by CRC Press. This book was released on 2022-09-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental and theoretical concepts of optimization algorithms in a systematic manner, along with their potential applications and implementation strategies in mining engineering. It explains basics of systems engineering, linear programming, and integer linear programming, transportation and assignment algorithms, network analysis, dynamic programming, queuing theory and their applications to mine systems. Reliability analysis of mine systems, inventory management in mines, and applications of non-linear optimization in mines are discussed as well. All the optimization algorithms are explained with suitable examples and numerical problems in each of the chapters. Features include: • Integrates operations research, reliability, and novel computerized technologies in single volume, with a modern vision of continuous improvement of mining systems. • Systematically reviews optimization methods and algorithms applied to mining systems including reliability analysis. • Gives out software-based solutions such as MATLAB®, AMPL, LINDO for the optimization problems. • All discussed algorithms are supported by examples in each chapter. • Includes case studies for performance improvement of the mine systems. This book is aimed primarily at professionals, graduate students, and researchers in mining engineering.
Download or read book Open Pit Mine Planning Design written by W. A. Hustrulid and published by Taylor & Francis Group. This book was released on 2006 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Underground Mining written by Virginia Polytechnic Institute and State University. Department of Mining and Minerals Engineering and published by . This book was released on 1964* with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization Techniques and their Applications to Mine Systems written by Amit Kumar Gorai and published by CRC Press. This book was released on 2022-09-30 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamental and theoretical concepts of optimization algorithms in a systematic manner, along with their potential applications and implementation strategies in mining engineering. It explains basics of systems engineering, linear programming, and integer linear programming, transportation and assignment algorithms, network analysis, dynamic programming, queuing theory and their applications to mine systems. Reliability analysis of mine systems, inventory management in mines, and applications of non-linear optimization in mines are discussed as well. All the optimization algorithms are explained with suitable examples and numerical problems in each of the chapters. Features include: • Integrates operations research, reliability, and novel computerized technologies in single volume, with a modern vision of continuous improvement of mining systems. • Systematically reviews optimization methods and algorithms applied to mining systems including reliability analysis. • Gives out software-based solutions such as MATLAB®, AMPL, LINDO for the optimization problems. • All discussed algorithms are supported by examples in each chapter. • Includes case studies for performance improvement of the mine systems. This book is aimed primarily at professionals, graduate students, and researchers in mining engineering.
Download or read book Advances in Spatio Temporal Analysis written by Xinming Tang and published by CRC Press. This book was released on 2007-08-23 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geographic Information Technology have raised the expectations of users. A static map is no longer enough; there is now demand for a dynamic representation. Time is of great importance when operating on real world geographical phenomena, especially when these are dynamic. Researchers in the field of Temporal Geographical Information Systems (TGIS) have been developing methods of incorporating time into geographical information systems. Spatio-temporal analysis embodies spatial modelling, spatio-temporal modelling and spatial reasoning and data mining. Advances in Spatio-Temporal Analysis contributes to the field of spatio-temporal analysis, presenting innovative ideas and examples that reflect current progress and achievements.
Download or read book Design Optimization in Underground Coal Systems written by and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
