Download or read book Optimization of Single level and Multi level Capacitated Lot sizing Problems for a Class of Repetitive Manufacturing Systems written by S. J. R. Royle and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi Level Lot Sizing and Scheduling written by Alf Kimms and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the outcome of my research in the field of multi levellot sizing and scheduling which started in May 1993 at the Christian-Albrechts-University of Kiel (Germany). During this time I discovered more and more interesting aspects ab out this subject and I had to learn that not every promising idea can be thoroughly evaluated by one person alone. Nevertheless, I am now in the position to present some results which are supposed to be useful for future endeavors. Since April 1995 the work was done with partial support from the research project no. Dr 170/4-1 from the "Deutsche For schungsgemeinschaft" (D FG). The remaining space in this preface shaH be dedicated to those who gave me valuable support: First, let me express my deep gratitude towards my thesis ad visor Prof. Dr. Andreas Drexl. He certainly is a very outstanding advisor. Without his steady suggestions, this work would not have come that far. Despite his scarce time capacities, he never rejected proof-reading draft versions of working papers, and he was always willing to discuss new ideas - the good as weH as the bad ones. He and Prof. Dr. Gerd Hansen refereed this thesis. I am in debted to both for their assessment. I am also owing something to Dr. Knut Haase. Since we al most never had the same opinion when discussing certain lot sizing aspects, his comments and criticism gave stimulating input.
Download or read book Multi Level Capacitated Lotsizing with Setup Carryover written by Lisbeth Buschkühl and published by Springer. This book was released on 2019-02-19 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lotsizing problems are found in every company, which produces various items on resources with scarce capacities. In general, the objective is to find production plans, which meet demand with the resources` given capacities and at minimal costs. However, there is a great variety of company-specific lotsizing problems due to the complexity of the underlying production processes. Both standard MRP-systems and modern Advanced Planning Systems fail to provide adequate solutions. Instead, they most often compute production plans, which are not feasible in practice. In this book new lotsizing models are presented for multi-stage production systems with general product structures, dynamic demand, setup times and lead times. They are extended to cover production on parallel machines. An iterative solution procedure is presented, which generates feasible production plans within seconds of computation time. Potential readership includes scholars of supply chain management and production planning, interested students in these areas as well as practitioners involved in production planning.
Download or read book Capacitated Lot Sizing Problems in Process Industries written by Ravi Ramya and published by Springer. This book was released on 2019-01-04 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the Capacitated Lot Sizing Problem (CLSP) in process industries. In almost all process industries, there are situations where products have short/long setup times, and the setup of the product and its subsequent production are carried over, across consecutive periods. The setup of a product is carried over across more than one successive period in the case of products having long setup times. A product having short setup has its setup time less than the capacity of the period in which it is setup. The setup is immediately followed by its production of the product and it may also be carried over, across successive time period(s). Many process industries require production of a product to occur immediately after its setup (without the presence of idle time between the setup and production of the product), and they also require the product to be continuously produced without any interruption. This book considers a single-machine, single-level and multiple-item CLSP problem. This book introduces the Capacitated Lot Sizing Problem with Production Carryover and Setup Crossover across periods (CLSP-PCSC). Mathematical models are proposed which are all encompassing that they can handle continuous manufacturing (as in process industries), and also situations where the setup costs and holding costs are product dependent and time independent/time dependent, with possible backorders, and with other appropriate adaptations. Comprehensive heuristics are proposed based on these mathematical models to solve the CLSP-PCSC. The performance of the proposed models and heuristics are evaluated using problem instances of various sizes. This book also covers mathematical models developed for the Capacitated Lot Sizing Problem with Production Carryover and Setup Crossover across periods, and with Sequence-Dependent Setup Times and Setup Costs (CLSP-SD-PCSC). These models allow the presence of backorders and also address real-life situations present in process industries such as production of a product starting immediately after its setup and its uninterrupted production carryover across periods, along with the presence of short/long setup times. Heuristics proposed for the CLSP-PCSC can be extended to address the CLSP problem with sequence dependent setup costs and setup times. All the models and heuristics proposed in this book address some real-life considerations present in process industries.
Download or read book Dynamic lot sizing problems with stochastic production output written by Michael Kirste and published by BoD – Books on Demand. This book was released on 2017-06-23 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the real world, production systems are affected by external and internal uncertainties. Stochastic demand - an external uncertainty - arises mainly due to forecast errors and unknown behavior of customers in future. Internal uncertainties occur in situations where random yield, random production capacity, or stochastic processing times affect the productivity of a manufacturing system. The resulting stochastic production output is especially present in industries with modern and complex technologies as the semiconductor industry. This thesis provides model formulations and solution methods for capacitated dynamic lot sizing problems with stochastic demand and stochastic production output that can be used by practitioners within Manufacturing Resource Planning Systems (MRP), Capacitated Production Planning Systems (CPPS), and Advanced Planning Systems (APS). In all models, backordered demand is controlled with service levels. Numerical studies compare the solution methods and give managerial implications in presence of stochastic production output. This book addresses practitioners, consultants, and developers as well as students, lecturers, and researchers with focus on lot sizing, production planning, and supply chain management.
Download or read book Fix and optimize Heuristic and MP based Approaches for Capacitated Lot Sizing Problem with Setup Carryover Setup Splitting and Backlogging written by Cheng-Lung Chen and published by . This book was released on 2015 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, a single-level, multi-item capacitated lot sizing problem with setup carryover, setup splitting and backlogging is investigated. This problem is typically used in the tactical and operational planning stage, determining the optimal production quantities and sequencing for all the products in the planning horizon. Although the capacitated lot sizing problems have been investigated with many different features from researchers, the simultaneous consideration of setup carryover and setup splitting is relatively new. This consideration is beneficial to reduce costs and produce feasible production schedule. Setup carryover allows the production setup to be continued between two adjacent periods without incurring extra setup costs and setup times. Setup splitting permits the setup to be partially finished in one period and continued in the next period, utilizing the capacity more efficiently and remove infeasibility of production schedule.The main approaches are that first the simple plant location formulation is adopted to reformulate the original model. Furthermore, an extended formulation by redefining the idle period constraints is developed to make the formulation tighter. Then for the purpose of evaluating the solution quality from heuristic, three types of valid inequalities are added to the model. A fix-and-optimize heuristic with two-stage product decomposition and period decomposition strategies is proposed to solve the formulation. This generic heuristic solves a small portion of binary variables and all the continuous variables rapidly in each subproblem. In addition, the case with demand backlogging is also incorporated to demonstrate that making additional assumptions to the basic formulation does not require to completely altering the heuristic.The contribution of this thesis includes several aspects: the computational results show the capability, flexibility and effectiveness of the approaches. The average optimality gap is 6% for data without backlogging and 8% for data with backlogging, respectively. In addition, when backlogging is not allowed, the performance of fix-and-optimize heuristic is stable regardless of period length. This gives advantage of using such approach to plan longer production schedule. Furthermore, the performance of the proposed solution approaches is analyzed so that later research on similar topics could compare the result with different solution strategies.
Download or read book Deterministic Lotsizing Models for Production Planning written by Marc Salomon and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with timing and sizing decisions for production lots, and more precisely, with mathematical models to support optimal tim ing and sizing decisions. These models are called lotsizing models. They are characterized by the fact that production lots are determined based on a trade-offbetween production costs and customer service. Production costs can be categorized as basic production costs, which consist of material costs, labour costs, machine startup costs and over head costs, and inventory related costs, which include costs of capital tied up in inventory, insurances and taxes. Customer service is the capability of the firm to deliver to their clients the products in the quantity they ordered at the agreed upon time and place. The costs of realizing a certain service level are usuaIly very dif ficult to convert into money. They include costs of expediting, loss of customer goodwill, and loss of sales revenues resulting from the short age situation.
Download or read book Optimization Methods for Multi level Lot sizing Problems written by Guillaume Goisque and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis we are interested in several multi-level lot-sizing problems taking into account production capacities. We first study a 2-level in series lot-sizing problem with identical and stationary capacities at both levels, for which we propose an exact dynamic algorithm running in polynomial time under some hypothesis. Next chapter extends this result on two main lines: we consider the multi-level in series lot-sizing problem with batch deliveries and with a number of level which is part of the input. We provide a very efficient exact algorithm for this problem, which is polynomial in the number of levels and in the number of periods, based on an original decomposition into induced connected components. Then, we consider more general versions of this problem, for which we provide NP-hardness results when batch sizes or capacities are level-dependent. We propose 2-approximation algorithms for these problems, based on the sandwiching of the objective function by two affine functions. Finally, we study a single-level lot-sizing problem in a system composed of identical machines working in parallel. The originality of this study is to consider a periodic energy limitation. At each period it must be decided how many machines to switch on or off and the volume to be produced and stored. Complexity results are provided, showing that this problem is NP-hard, even under some restrictive assumptions, and an exact dynamic algorithm running in polynomial time is proposed for the case of stationary energy parameters.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1993 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Computational Combinatorial Optimization written by Michael Jünger and published by Springer. This book was released on 2003-06-30 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial contains written versions of seven lectures on Computational Combinatorial Optimization given by leading members of the optimization community. The lectures introduce modern combinatorial optimization techniques, with an emphasis on branch and cut algorithms and Lagrangian relaxation approaches. Polyhedral combinatorics as the mathematical backbone of successful algorithms are covered from many perspectives, in particular, polyhedral projection and lifting techniques and the importance of modeling are extensively discussed. Applications to prominent combinatorial optimization problems, e.g., in production and transport planning, are treated in many places; in particular, the book contains a state-of-the-art account of the most successful techniques for solving the traveling salesman problem to optimality.
Download or read book Design and Modeling of Mechanical Systems V written by Lassaad Walha and published by Springer Nature. This book was released on 2022-08-19 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 9th International Congress on Design and Modeling of Mechanical Systems (CMSM’2021), held on December 20-22, 2021, in Hammamet, Tunisia. It reports on research findings, advanced methods and industrial applications relating to mechanical systems, materials and structures, and machining. It covers vibration analysis, CFD modeling and simulation, intelligent monitoring and control, including applications related to industry 4.0 and additive manufacturing. Continuing on the tradition of the previous editions, and with a good balance of theory and practice, the book offers a timely snapshot, and a useful resource for both researchers and professionals in the field of design and modeling of mechanical systems.
Download or read book Production Planning by Mixed Integer Programming written by Yves Pochet and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides a comprehensive modeling, reformulation and optimization approach for solving production planning and supply chain planning problems, covering topics from a basic introduction to planning systems, mixed integer programming (MIP) models and algorithms through the advanced description of mathematical results in polyhedral combinatorics required to solve these problems. Based on twenty years worth of research in which the authors have played a significant role, the book addresses real life industrial production planning problems (involving complex production structures with multiple production stages) using MIP modeling and reformulation approach. The book provides an introduction to MIP modeling and to planning systems, a unique collection of reformulation results, and an easy to use problem-solving library. This approach is demonstrated through a series of real life case studies, exercises and detailed illustrations. Review by Jakub Marecek (Computer Journal) The emphasis put on mixed integer rounding and mixing sets, heuristics in-built in general purpose integer programming solvers, as well as on decompositions and heuristics using integer programming should be praised... There is no doubt that this volume offers the present best introduction to integer programming formulations of lotsizing problems, encountered in production planning. (2007)
Download or read book Stochastic Dynamic Lot Sizing in Supply Chains written by Timo Jannis Hilger and published by BoD – Books on Demand. This book was released on 2015-10-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companies frequently operate in an uncertain environment and many real life production planning problems imply volatility and stochastics of the customer demands. Thereby, the determination of the lot-sizes and the production periods significantly affects the profitability of a manufacturing company and the service offered to the customers. This thesis provides practice-oriented formulations and variants of dynamic lot-sizing problems in presence of restricted production resources and demand uncertainty. The demand fulfillment is regulated by service level constraints. Additionally, integrated production and remanufacturing planning under demand and return uncertainty in closed-loop supply chains is addressed. This book offers introductions to these problems and presents approximation models that can be applied under uncertainty. Comprehensive numerical studies provide managerial implications. The book is written for practitioners interested in supply chain management and production as well as for lecturers and students in business studies with a focus on supply chain management and operations management.
Download or read book Formal Methods in Manufacturing written by Javier Campos and published by CRC Press. This book was released on 2018-09-03 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Illustrated with real-life manufacturing examples, Formal Methods in Manufacturing provides state-of-the-art solutions to common problems in manufacturing systems. Assuming some knowledge of discrete event systems theory, the book first delivers a detailed introduction to the most important formalisms used for the modeling, analysis, and control of manufacturing systems (including Petri nets, automata, and max-plus algebra), explaining the advantages of each formal method. It then employs the different formalisms to solve specific problems taken from today’s industrial world, such as modeling and simulation, supervisory control (including deadlock prevention) in a distributed and/or decentralized environment, performance evaluation (including scheduling and optimization), fault diagnosis and diagnosability analysis, and reconfiguration. Containing chapters written by leading experts in their respective fields, Formal Methods in Manufacturing helps researchers and application engineers handle fundamental principles and deal with typical quality goals in the design and operation of manufacturing systems.
Download or read book Two level Capacitated Lot Sizing in Production Control to Guarantee Availability Considering Multidimensional Restrictions written by Daniel Brodkorb and published by . This book was released on 2011 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Capacitated Multi Item Multi Echelon Lot Sizing with Setup Carry Over Under Uncertain Demand written by Manuel Schlenkrich and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study focuses on the lot sizing problem with setup carry-over in multi-item multi-echelon capacitated production systems under uncertain customer demand. We investigate budget-uncertainty robust optimization and scenario-based stochastic programming, to address the uncertainty in customer demand. Three modeling strategies are proposed within the stochastic programming framework, exploring different decision stages for setup carry-over and production quantities. In our examination of the robust model, we explore different robustness parameters, specifically the uncertainty budget and the variation interval. Extensive numerical experiments are conducted to compare the average and worst case performance of the models on out-of-sample scenarios. We fit conditional inference trees to the evaluation results and predict the suitability of robust and stochastic approaches for the test instances based on their problem characteristics. The findings provide valuable managerial insights, enabling decision makers to estimate the most appropriate modeling approach for their lot sizing problem at hand. Moreover they highlight the importance of choosing appropriate robustness parameters for robust optimization models and emphasize the value of flexibility in carry-over and quantity decisions. Lastly, we analyze the production plans obtained by lot sizing models with different levels of flexibility according to their solution structures and investigate the resulting changes in setup patterns.
Download or read book Solution of the Multi Level Capacitated Lot Sizing Problem by Simulated Annealing written by Gerrit Klempert and published by . This book was released on 2000 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
