Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook Biological Waste Water Treatment Design and Optimisation of Activated Sludge Systems written by and published by Webshop Wastewater Handbook. This book was released on 2007 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its conception almost a century ago, the activated sludge system has emerged as the dominant waste water treatment technology, with tens of thousands of implementations worldwide. The pivotal role played by the activated sludge system was originally due to its high efficiency in COD- and suspended solids removal, while more recently new processes for the removal of the macro-nutrients nitrogen and phosphorus have easily been accommodated.

Download or read book Activated Sludge Wastewater Treatment written by Eric Wahlberg and published by . This book was released on 1918-12-17 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a milestone in the evolution of wastewater treatment operations. It explains the science of treatment framed within an ethics where wastewater personnel are seen as protectors of public health, preservers of the environment, and stewards of public monies. Written by a former plant operator with a Ph.D., the book presents the fundamental science behind the unit processes in wastewater treatment plants, including biological nutrient removal. In so doing, it challenges longstanding operational doctrines enshrined by habit and tradition, such as being careful not to remove too many influent organics in a primary clarifier for fear of starving the microorganisms in the aeration basin, or using the MLSS concentration to control effluent quality, or cutting the growth rate of microorganisms in anticipation of their slower growth rate in winter. Dispelling much of the prevailing that's-the-way-we've-always-done-it dogma is achieved through an elegant and understandable presentation of the biology, chemistry, and physics that explain the phenomena of wastewater treatment. At the same time, the book is intensely practical. It offers detailed and data-based process control solutions to stabilize plant performance, maintain consistent effluent quality, and reduce energy costs. Powerful, easily implemented statistical techniques are given to unlock the meaning of plant performance data and make informed process control decisions. The book's approach is learning-focused, including numerous examples of a failsafe, foolproof arithmetical method that enables operations professionals to define, set up, and solve problems.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1988 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Anaerobic Digestion Model No 1 ADM1 written by IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes and published by IWA Publishing. This book was released on 2002-02-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Download or read book Optimizing Water Treatment Plant Performance Using the Composite Correction Program written by and published by . This book was released on 1998 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerobic Granular Sludge written by S. Bathe and published by IWA Publishing. This book was released on 2005-03-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerobic Granular Sludge has recently received growing attention by researchers and technology developers, worldwide. Laboratory studies and preliminary field tests led to the conclusion that granular activated sludge can be readily established and profitably used in activated sludge plants, provided 'correct' process conditions are chosen. But what makes process conditions 'correct'? And what makes granules different from activated sludge flocs? Answers to these question are offered in Aerobic Granular Sludge. Major topics covered in this book include: Reasons and mechanism of aerobic granule formation Structure of the microbial population of aerobic granules Role, composition and physical properties of EPS Diffuse limitation and microbial activity within granules Physio-chemical characteristics Operation and application of granule reactors Scale-up aspects of granular sludge reactors, and case studies Aerobic Granular Sludge provides up-to-date information about a rapidly emerging new technology of biological treatment.

Download or read book Activated Sludge 100 Years and Counting written by David Jenkins and published by IWA Publishing. This book was released on 2014-05-31 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge - 100 Years and Counting covers the current status of all aspects of the activated sludge process and looks forward to its further development in the future. It celebrates 100 years of the Activated Sludge process, from the time that the early developers presented the seminal works that led to its eventual worldwide adoption. The book assembles contributions from renowned world leaders in activated sludge research, development, technology and application. The objective of the book is to summarise the knowledge of all aspects of the activated sludge process and to present and discuss anticipated future developments. The book comprises invited papers that were delivered at the conference "Activated Sludge...100 Years and Counting!", held in Essen, Germany, June 12th to 14th, 2014. Activated Sludge - 100 Years and Counting is of interest to researchers, engineers, designers, operations specialists, and governmental agencies from a wide range of disciplines associated with all aspects of the activated sludge process. Authors: David Jenkins, University of California at Berkeley, USA, Jiri Wanner, Institute of Chemical Technology, Prague, Czech Republic.

Download or read book Wastewater Treatment Plant Design Handbook written by Water Environment Federation and published by . This book was released on 2012 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prepared by the 'Wastewater Treatment Plant Design Handbook' Task Force of the 'Water Environment Federation' --p. [iii]

Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

Download or read book Water and Wastewater Treatment written by Joanne E. Drinan and published by CRC Press. This book was released on 2012-07-20 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lauded for its engaging, highly readable style, the best-selling first edition became the premier guide for nonengineers involved in water and wastewater treatment operations. Water and Wastewater Treatment: A Guide for the Nonengineering Professional, Second Edition continues to provide a simple, nonmathematical account of the unit processes used to treat both drinking water and wastewater. Completely revised and expanded, this second edition adds new material on technological advances, regulatory requirements, and other current issues facing the water and wastewater industries. Using step-by-step, jargon-free language, the authors present all the basic unit processes involved in drinking water and wastewater treatment. They describe each unit process, the function of the process in water or wastewater treatment, and the basic equipment used in each process. They also explain how the processes fit together within a drinking water or wastewater treatment system and discuss the fundamental concepts that constitute water and wastewater treatment processes as a whole. Avoiding mathematics, chemistry, and biology, the book includes numerous illustrations for easy comprehension of concepts and processes. It also contains chapter summaries and an extensive glossary of terms and abbreviations for quick reference.

Download or read book Stochastic Global Optimization Methods and Applications to Chemical Biochemical Pharmaceutical and Environmental Processes written by Ch. Venkateswarlu and published by Elsevier. This book was released on 2019-11-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic global optimization methods and applications to chemical, biochemical, pharmaceutical and environmental processes presents various algorithms that include the genetic algorithm, simulated annealing, differential evolution, ant colony optimization, tabu search, particle swarm optimization, artificial bee colony optimization, and cuckoo search algorithm. The design and analysis of these algorithms is studied by applying them to solve various base case and complex optimization problems concerning chemical, biochemical, pharmaceutical, and environmental engineering processes. Design and implementation of various classical and advanced optimization strategies to solve a wide variety of optimization problems makes this book beneficial to graduate students, researchers, and practicing engineers working in multiple domains. This book mainly focuses on stochastic, evolutionary, and artificial intelligence optimization algorithms with a special emphasis on their design, analysis, and implementation to solve complex optimization problems and includes a number of real applications concerning chemical, biochemical, pharmaceutical, and environmental engineering processes. - Presents various classical, stochastic, evolutionary, and artificial intelligence optimization algorithms for the benefit of the audience in different domains - Outlines design, analysis, and implementation of optimization strategies to solve complex optimization problems of different domains - Highlights numerous real applications concerning chemical, biochemical, pharmaceutical, and environmental engineering processes

Download or read book Anaerobic Sewage Treatment written by Jeroen van der Lubbe and published by IWA Publishing. This book was released on 2019-08-15 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anaerobic Sewage Treatment: Optimization of Process and Physical Design of Anaerobic and Complementary Processes focuses on process design and deals with start-up procedures and steady state performance of UASB reactors, as well as the influence of operation on reactor performance.

Download or read book Optimization of Urban Wastewater Systems using Model Based Design and Control written by Carlos Alberto Velez Quintero and published by CRC Press. This book was released on 2020-11-25 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A considerable amount of scientific evidence has been collected leading to the conclusion that urban wastewater components should be designed as one integrated system, in order to protect the receiving waters cost-effectively. Moreover, there is a need to optimize the design and operation of the sewerage network and wastewater treatment plant (WwTP) considering the dynamic interactions between them and the receiving waters. This book introduces a method called Model Based Design and Control (MoDeCo) for the optimum design and control of urban wastewater components. The book presents a detailed description of the integration of modelling tools for the sewer, the wastewater treatment plants and the rivers. The complex modelling structure used for the integrated model challenge previous applications of integrated modelling approaches presented in scientific literature. The combination of modelling tools and multi-objective evolutionary algorithms demonstrated in this book represent an excellent tool for designers and managers of urban wastewater infrastructure. This book also presents two alternatives to solve the computing demand of the optimization of integrated systems in practical applications: the use of surrogate modelling tools and the use of cloud computer infrastructure for parallel computing.