Download or read book Industrial Robotics written by and published by I-Tech. This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Camera Aided Robot Calibration written by Hangi Zhuang and published by CRC Press. This book was released on 2018-04-24 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot calibration is the process of enhancing the accuracy of a robot by modifying its control software. This book provides a comprehensive treatment of the theory and implementation of robot calibration using computer vision technology. It is the only book to cover the entire process of vision-based robot calibration, including kinematic modeling, camera calibration, pose measurement, error parameter identification, and compensation. The book starts with an overview of available techniques for robot calibration, with an emphasis on vision-based techniques. It then describes various robot-camera systems. Since cameras are used as major measuring devices, camera calibration techniques are reviewed. Camera-Aided Robot Calibration studies the properties of kinematic modeling techniques that are suitable for robot calibration. It summarizes the well-known Denavit-Hartenberg (D-H) modeling convention and indicates the drawbacks of the D-H model for robot calibration. The book develops the Complete and Parametrically Continuous (CPC) model and the modified CPC model, that overcome the D-H model singularities. The error models based on these robot kinematic modeling conventions are presented. No other book available addresses the important, practical issue of hand/eye calibration. This book summarizes current research developments and demonstrates the pros and cons of various approaches in this area. The book discusses in detail the final stage of robot calibration - accuracy compensation - using the identified kinematic error parameters. It offers accuracy compensation algorithms, including the intuitive task-point redefinition and inverse-Jacobian algorithms and more advanced algorithms based on optimal control theory, which are particularly attractive for highly redundant manipulators. Camera-Aided Robot Calibration defines performance indices that are designed for off-line, optimal selection of measurement configurations. It then describes three approaches: closed-form, gradient-based, and statistical optimization. The included case study presents experimental results that were obtained by calibrating common industrial robots. Different stages of operation are detailed, illustrating the applicability of the suggested techniques for robot calibration. Appendices provide readers with preliminary materials for easier comprehension of the subject matter. Camera-Aided Robot Calibration is a must-have reference for researchers and practicing engineers-the only one with all the information!
Download or read book Intelligent Autonomous Systems 16 written by Marcelo H. Ang Jr and published by Springer Nature. This book was released on 2022-04-07 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances and research achievements in the fields of autonomous robots and intelligent systems, presented at the IAS-16 conference, conducted virtually in Singapore, from 22 to 25 June 2021. IAS is a common platform for an exchange and sharing of ideas among the international scientific research and technical community on some of the main trends of robotics and autonomous systems: navigation, machine learning, computer vision, control, and robot design—as well as a wide range of applications. IAS-16 reflects the rise of machine learning and deep learning developments in the robotics field, as employed in a variety of applications and systems. All contributions were selected using a rigorous peer-reviewed process to ensure their scientific quality. Despite the challenge of organising a conference during a pandemic, the IAS biennial conference remains an essential venue for the robotics and autonomous systems community ever since its inception in 1986. Chapters 46 of this book is available open access under a CC BY 4.0 license at link.springer.com
Download or read book Robot Manipulators written by Marco Ceccarelli and published by BoD – Books on Demand. This book was released on 2008-09-01 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book we have grouped contributions in 28 chapters from several authors all around the world on the several aspects and challenges of research and applications of robots with the aim to show the recent advances and problems that still need to be considered for future improvements of robot success in worldwide frames. Each chapter addresses a specific area of modeling, design, and application of robots but with an eye to give an integrated view of what make a robot a unique modern system for many different uses and future potential applications. Main attention has been focused on design issues as thought challenging for improving capabilities and further possibilities of robots for new and old applications, as seen from today technologies and research programs. Thus, great attention has been addressed to control aspects that are strongly evolving also as function of the improvements in robot modeling, sensors, servo-power systems, and informatics. But even other aspects are considered as of fundamental challenge both in design and use of robots with improved performance and capabilities, like for example kinematic design, dynamics, vision integration.
Download or read book Advances in Service and Industrial Robotics written by Saïd Zeghloul and published by Springer Nature. This book was released on 2021-06-04 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 30th International Conference on Robotics in Alpe-Adria-Danube Region, RAAD 2021, held in Poitiers, France, 21–23 June 2021. It gathers contributions by researchers from several countries on all major areas of robotic research, development and innovation, as well as new applications and current trends. The topics covered include: novel designs and applications of robotic systems, intelligent cooperating and service robots, advanced robot control, human-robot interfaces, robot vision systems, mobile robots, humanoid and walking robots, bio-inspired and swarm robotic systems, aerial, underwater and spatial robots, robots for ambient assisted living, medical robots and bionic prostheses, cognitive robots, cloud robotics, ethical and social issues in robotics, etc. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.
Download or read book Cable Driven Parallel Robots written by Tobias Bruckmann and published by Springer Science & Business Media. This book was released on 2012-09-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering presentations to the First International Conference on Cable-Driven Parallel Robots, this book covers classification and definition, kinematics, workspace analysis, cable modeling, hardware/prototype development, control and calibration and more.
Download or read book Fundamentals of Manipulator Calibration written by Benjamin W. Mooring and published by Wiley-Interscience. This book was released on 1991-03-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the details of the calibration process step-by-step, covering systems modeling, measurement, identification, correction and performance evaluation. Calibration techniques are presented with an explanation of how they interact with each other as they are modified. Shows the reader how to determine if, in fact, a robot problem is a calibration problem and then how to analyze it.
Download or read book Machine Vision and Navigation written by Oleg Sergiyenko and published by Springer Nature. This book was released on 2019-09-30 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a variety of perspectives on vision-based applications. These contributions are focused on optoelectronic sensors, 3D & 2D machine vision technologies, robot navigation, control schemes, motion controllers, intelligent algorithms and vision systems. The authors focus on applications of unmanned aerial vehicles, autonomous and mobile robots, industrial inspection applications and structural health monitoring. Recent advanced research in measurement and others areas where 3D & 2D machine vision and machine control play an important role, as well as surveys and reviews about vision-based applications. These topics are of interest to readers from diverse areas, including electrical, electronics and computer engineering, technologists, students and non-specialist readers. • Presents current research in image and signal sensors, methods, and 3D & 2D technologies in vision-based theories and applications; • Discusses applications such as daily use devices including robotics, detection, tracking and stereoscopic vision systems, pose estimation, avoidance of objects, control and data exchange for navigation, and aerial imagery processing; • Includes research contributions in scientific, industrial, and civil applications.
Download or read book Camera Aided Robot Calibration written by Hangi Zhuang and published by CRC Press. This book was released on 2018-04-24 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot calibration is the process of enhancing the accuracy of a robot by modifying its control software. This book provides a comprehensive treatment of the theory and implementation of robot calibration using computer vision technology. It is the only book to cover the entire process of vision-based robot calibration, including kinematic modeling, camera calibration, pose measurement, error parameter identification, and compensation. The book starts with an overview of available techniques for robot calibration, with an emphasis on vision-based techniques. It then describes various robot-camera systems. Since cameras are used as major measuring devices, camera calibration techniques are reviewed. Camera-Aided Robot Calibration studies the properties of kinematic modeling techniques that are suitable for robot calibration. It summarizes the well-known Denavit-Hartenberg (D-H) modeling convention and indicates the drawbacks of the D-H model for robot calibration. The book develops the Complete and Parametrically Continuous (CPC) model and the modified CPC model, that overcome the D-H model singularities. The error models based on these robot kinematic modeling conventions are presented. No other book available addresses the important, practical issue of hand/eye calibration. This book summarizes current research developments and demonstrates the pros and cons of various approaches in this area. The book discusses in detail the final stage of robot calibration - accuracy compensation - using the identified kinematic error parameters. It offers accuracy compensation algorithms, including the intuitive task-point redefinition and inverse-Jacobian algorithms and more advanced algorithms based on optimal control theory, which are particularly attractive for highly redundant manipulators. Camera-Aided Robot Calibration defines performance indices that are designed for off-line, optimal selection of measurement configurations. It then describes three approaches: closed-form, gradient-based, and statistical optimization. The included case study presents experimental results that were obtained by calibrating common industrial robots. Different stages of operation are detailed, illustrating the applicability of the suggested techniques for robot calibration. Appendices provide readers with preliminary materials for easier comprehension of the subject matter. Camera-Aided Robot Calibration is a must-have reference for researchers and practicing engineers-the only one with all the information!
Download or read book Robotics Vision and Control written by Peter Corke and published by Springer. This book was released on 2011-09-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has maintained two open-source MATLAB Toolboxes for more than 10 years: one for robotics and one for vision. The key strength of the Toolboxes provide a set of tools that allow the user to work with real problems, not trivial examples. For the student the book makes the algorithms accessible, the Toolbox code can be read to gain understanding, and the examples illustrate how it can be used —instant gratification in just a couple of lines of MATLAB code. The code can also be the starting point for new work, for researchers or students, by writing programs based on Toolbox functions, or modifying the Toolbox code itself. The purpose of this book is to expand on the tutorial material provided with the toolboxes, add many more examples, and to weave this into a narrative that covers robotics and computer vision separately and together. The author shows how complex problems can be decomposed and solved using just a few simple lines of code, and hopefully to inspire up and coming researchers. The topics covered are guided by the real problems observed over many years as a practitioner of both robotics and computer vision. It is written in a light but informative style, it is easy to read and absorb, and includes a lot of Matlab examples and figures. The book is a real walk through the fundamentals of robot kinematics, dynamics and joint level control, then camera models, image processing, feature extraction and epipolar geometry, and bring it all together in a visual servo system. Additional material is provided at http://www.petercorke.com/RVC
Download or read book Advances in Engineering Research and Application written by Duy Cuong Nguyen and published by Springer Nature. This book was released on with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book British National Bibliography for Report Literature written by and published by . This book was released on 1999 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vision Based Identification and Force Control of Industrial Robots written by Abdullah Aamir Hayat and published by Springer Nature. This book was released on 2022-03-21 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on end-to-end robotic applications using vision and control algorithms, exposing its readers to design innovative solutions towards sensors-guided robotic bin-picking and assembly in an unstructured environment. The use of sensor fusion is demonstrated through a bin-picking task of texture-less cylindrical objects. The system identification techniques are also discussed for obtaining precise kinematic and dynamic parameters of an industrial robot which facilitates the control schemes to perform pick-and-place tasks autonomously without any interference from the user. The uniqueness of this book lies in a judicious balance between theory and technology within the context of industrial application. Therefore, it will be valuable to researchers working in the area of vision- and force control- based robotics, as well as beginners in this inter-disciplinary area, as it deals with the basics and technologically advanced research strategies.
Download or read book Computer Vision written by and published by Springer. This book was released on 2014-04-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference provides easy access to relevant information on all aspects of Computer Vision. An A-Z format of over 240 entries offers a diverse range of topics for those seeking entry into any aspect within the broad field of Computer Vision. Over 200 Authors from both industry and academia contributed to this volume. Each entry includes synonyms, a definition and discussion of the topic, and a robust bibliography. Extensive cross-references to other entries support efficient, user-friendly searches for immediate access to relevant information. Entries were peer-reviewed by a distinguished international advisory board, both scientifically and geographically diverse, ensuring balanced coverage. Over 3700 bibliographic references for further reading enable deeper exploration into any of the topics covered. The content of Computer Vision: A Reference Guide is expository and tutorial, making the book a practical resource for students who are considering entering the field, as well as professionals in other fields who need to access this vital information but may not have the time to work their way through an entire text on their topic of interest.
Download or read book Control Engineering in Robotics and Industrial Automation written by Muralindran Mariappan and published by Springer Nature. This book was released on 2021-08-12 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first research collection by the Malaysian Society for Automatic Control Engineers (MACE). Numerous applications of control engineering, sensor, and instrumentation technology in robotics, industrial automation, and other mechatronic systems are presented in this book. The book begins by introducing control engineering in robotics and industrial automation. It progresses through a series of chapters, discussing the application of control engineering in various areas such as: brake-by-wire technology; web scrubber systems; robot localization; and, autonomous navigation systems. Coverage of swarm robotics behaviors and applications of sensor technology in the field of music, biomedical technology, and structural analysis takes the book beyond its core of mechatronic systems and demonstrates a more diverse application of the ideas it presents. Each chapter provides comprehensive and detailed coverage of the main ideas, design methods, and practical needs of its chosen topic, making this book accessible and useful to researchers, engineers, postgraduates, and undergraduate students.
Download or read book Physics Based Vision Principles and Practice written by Lawrence B. Wolff and published by CRC Press. This book was released on 1993-01-02 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commentaries by the editors to this comprehensive anthology in the area of physics-based vision put the papers in perspective and guide the reader to a thorough understanding of the basics of the field. Paper Topics Include: - Intensity Reflection Models - Polarization and Refraction - Camera Calibration - Quantization and Sampling - Depth from Opt
Download or read book Visual Sensors written by Oscar Reinoso and published by MDPI. This book was released on 2020-03-27 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual sensors are able to capture a large quantity of information from the environment around them. A wide variety of visual systems can be found, from the classical monocular systems to omnidirectional, RGB-D, and more sophisticated 3D systems. Every configuration presents some specific characteristics that make them useful for solving different problems. Their range of applications is wide and varied, including robotics, industry, agriculture, quality control, visual inspection, surveillance, autonomous driving, and navigation aid systems. In this book, several problems that employ visual sensors are presented. Among them, we highlight visual SLAM, image retrieval, manipulation, calibration, object recognition, navigation, etc.
