Download or read book Optimal Flow Control in Manufacturing Systems written by O. Maimon and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified optimal control approach to a large class of problems arising in the field of production planning and scheduling. It introduces a leading optimal flow control paradigm which results in efficient solutions for planning and scheduling problems. This book also introduces the reader to analytical and numerical methods of the maximum principle, used here as a mathematical instrument in modeling and solving production planning and scheduling problems. The book examines control of production flows rather than sequencing of distinct jobs. Methodologically, this paradigm allows us to progress from initial assumptions about a manufacturing environment, through mathematical models and construction of numerical methods, up to practical applications which prove the relevance of the theory developed here to the real world. Given a manufacturing system, the goal is to control the production, subject to given constraints, in such a way that the demands are tracked as closely as possible. The book considers a wide variety of problems encountered in actual production planning and scheduling. Among the problems are production flow sequencing and timing, capacity expansion and deterioration, subcontracting and overtime. The last chapter is entirely devoted to applications of the theory to scheduling production flows in real-life manufacturing systems. The enclosed disk provides software implementations of the developed methods with easy, convenient user interface. We aimed this book at a student audience - final year undergraduates as weIl as master and Ph. D.

Download or read book Optimal Flow Control in Manufacturing Systems written by O. Maimon and published by Springer. This book was released on 2013-01-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a unified optimal control approach to a large class of problems arising in the field of production planning and scheduling. It introduces a leading optimal flow control paradigm which results in efficient solutions for planning and scheduling problems. This book also introduces the reader to analytical and numerical methods of the maximum principle, used here as a mathematical instrument in modeling and solving production planning and scheduling problems. The book examines control of production flows rather than sequencing of distinct jobs. Methodologically, this paradigm allows us to progress from initial assumptions about a manufacturing environment, through mathematical models and construction of numerical methods, up to practical applications which prove the relevance of the theory developed here to the real world. Given a manufacturing system, the goal is to control the production, subject to given constraints, in such a way that the demands are tracked as closely as possible. The book considers a wide variety of problems encountered in actual production planning and scheduling. Among the problems are production flow sequencing and timing, capacity expansion and deterioration, subcontracting and overtime. The last chapter is entirely devoted to applications of the theory to scheduling production flows in real-life manufacturing systems. The enclosed disk provides software implementations of the developed methods with easy, convenient user interface. We aimed this book at a student audience - final year undergraduates as weIl as master and Ph. D.

Download or read book Stochastic Processes Modeling and Simulation written by D N Shanbhag and published by Gulf Professional Publishing. This book was released on 2003-02-24 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: This sequel to volume 19 of Handbook on Statistics on Stochastic Processes: Modelling and Simulation is concerned mainly with the theme of reviewing and, in some cases, unifying with new ideas the different lines of research and developments in stochastic processes of applied flavour. This volume consists of 23 chapters addressing various topics in stochastic processes. These include, among others, those on manufacturing systems, random graphs, reliability, epidemic modelling, self-similar processes, empirical processes, time series models, extreme value therapy, applications of Markov chains, modelling with Monte Carlo techniques, and stochastic processes in subjects such as engineering, telecommunications, biology, astronomy and chemistry. particular with modelling, simulation techniques and numerical methods concerned with stochastic processes. The scope of the project involving this volume as well as volume 19 is already clarified in the preface of volume 19. The present volume completes the aim of the project and should serve as an aid to students, teachers, researchers and practitioners interested in applied stochastic processes.

Download or read book Average Cost Control of Stochastic Manufacturing Systems written by Suresh P. Sethi and published by Springer Science & Business Media. This book was released on 2006-03-22 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book articulates a new theory that shows that hierarchical decision making can in fact lead to a near optimization of system goals. The material in the book cuts across disciplines. It will appeal to graduate students and researchers in applied mathematics, operations management, operations research, and system and control theory.

Download or read book Mechatronics in Engineering Design and Product Development written by Dobrivojie Popovich and published by CRC Press. This book was released on 1998-09-30 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a systematic and comprehensive overview to the theory and applications of mechatronic processes, emphasizing the adaptation and incorporation of this important tool in fulfilling desired performance and quality requirements. The authors address the core technologies needed for the design and development of the mechatronic product

Download or read book Mathematics of Stochastic Manufacturing Systems written by George Yin and published by American Mathematical Soc.. This book was released on 1997-01-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, leading experts in mathematical manufacturing research and related fields review and update recent advances of mathematics in stochastic manufacturing systems and attempt to bridge the gap between theory and applications. The topics covered include scheduling and production planning, modeling of manufacturing systems, hierarchical control for large and complex systems, Markov chains, queueing networks, numerical methods for system approximations, singular perturbed systems, risk-sensitive control, stochastic optimization methods, discrete event systems, and statistical quality control.

Download or read book Integrated Models in Production Planning Inventory Quality and Maintenance written by M.A. Rahim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production planning, inventory management, quality control, and maintenance policy are critical components of the manufacturing system. The effective integration of these four components gives a manufacturing operation the competitive edge in today's global market place. Integrated Models in Production Planning, Inventory, Quality, and Maintenance provides, in one volume, the latest developments in the integration of production, quality, and maintenance models. Prominent researchers, who are actively engaged in these areas, have contributed the topical chapters focused on the most recent issues in the area. In Part I, Ben-Daya and Rahim provide an overview of the literature dealing with integrated models for production, quality, and maintenance. Directions for future research are outlined. Part II contains six chapters (chapters 2 to 6) dealing with integrated models for production and maintenance. Part III deals with integrated production/inventory and quality models in chapters 7-11. Part IV focuses on quality and maintenance integrated models and contains two chapters. Part V deals with warranty, manufacturing, and quality and contains two chapters. Part VI addresses issues related to quality and contains three chapters (chapters 16-18).

Download or read book Hierarchical Decision Making in Stochastic Manufacturing Systems written by Suresh P. Sethi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important methods in dealing with the optimization of large, complex systems is that of hierarchical decomposition. The idea is to reduce the overall complex problem into manageable approximate problems or subproblems, to solve these problems, and to construct a solution of the original problem from the solutions of these simpler prob lems. Development of such approaches for large complex systems has been identified as a particularly fruitful area by the Committee on the Next Decade in Operations Research (1988) [42] as well as by the Panel on Future Directions in Control Theory (1988) [65]. Most manufacturing firms are complex systems characterized by sev eral decision subsystems, such as finance, personnel, marketing, and op erations. They may have several plants and warehouses and a wide variety of machines and equipment devoted to producing a large number of different products. Moreover, they are subject to deterministic as well as stochastic discrete events, such as purchasing new equipment, hiring and layoff of personnel, and machine setups, failures, and repairs.

Download or read book Scheduling Control Based Theory and Polynomial Time Algorithms written by K. Kogan and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a first attempt to systematically collect, classify and solve various continuous-time scheduling problems. The classes of problems distinguish scheduling by the number of machines and products, production constraints and performance measures. Although such classes are usually considered to be a prerogative of only combinatorial scheduling literature, the scheduling methodology suggested in this book is based on two mathematical tools - optimal control and combinatorics. Generally considered as belonging to two totally different areas of research and application, these seemingly irreconcilable tools can be integrated in a unique solution approach with the advantages of both. This new approach provides the possibility of developing effective polynomial-time algorithms to solve the generic scheduling problems. This book is aimed at a student audience - final year undergraduates as well as master and Ph.D. students, primarily in Operations Research, Management, Industrial Engineering and Control Systems. Indeed, some of the material in the book has formed part of the content of undergraduate and graduate courses taught at the Industrial Engineering Department of Tel-Aviv University, the Logistics Department of Bar-Ilan University and the Technology Management Department of Rolon Center for Technological Education, Israel. The book is also useful for practicing engineers interested in planning, scheduling and optimization methods. Since the book addresses the theory and design of computer-based scheduling algorithms, applied mathematicians and computer software specialists engaged in developing scheduling software for industrial engineering and management problems will find that the methods developed here can be embedded very efficiently in large applications.

Download or read book Handbook of Maintenance Management and Engineering written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: To be able to compete successfully both at national and international levels, production systems and equipment must perform at levels not even thinkable a decade ago. Requirements for increased product quality, reduced throughput time and enhanced operating effectiveness within a rapidly changing customer demand environment continue to demand a high maintenance performance. In some cases, maintenance is required to increase operational effectiveness and revenues and customer satisfaction while reducing capital, operating and support costs. This may be the largest challenge facing production enterprises these days. For this, maintenance strategy is required to be aligned with the production logistics and also to keep updated with the current best practices. Maintenance has become a multidisciplinary activity and one may come across situations in which maintenance is the responsibility of people whose training is not engineering. This handbook aims to assist at different levels of understanding whether the manager is an engineer, a production manager, an experienced maintenance practitioner or a beginner. Topics selected to be included in this handbook cover a wide range of issues in the area of maintenance management and engineering to cater for all those interested in maintenance whether practitioners or researchers. This handbook is divided into 6 parts and contains 26 chapters covering a wide range of topics related to maintenance management and engineering.

Download or read book Information Control Problems in Manufacturing 2006 written by Alexandre Dolgui and published by Elsevier. This book was released on 2011-10-10 with total page 2480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information Control Problems in Manufacturing 2006 contains the Proceedings of the 12th IFAC Symposium on Information Control Problems in Manufacturing (INCOM'2006). This symposium took place in Saint Etienne, France, on May 17-19 2006. INCOM is a tri-annual event of symposia series organized by IFAC and it is promoted by the IFAC Technical Committee on Manufacturing Plant Control. The purpose of the symposium INCOM'2006 was to offer a forum to present the state-of-the-art in international research and development work, with special emphasis on the applications of optimisation methods, automation and IT technologies in the control of manufacturing plants and the entire supply chain within the enterprise. The symposium stressed the scientific challenges and issues, covering the whole product and processes life cycle, from the design through the manufacturing and maintenance, to the distribution and service. INCOM'2006 Technical Program also included a special event on Innovative Engineering Techniques in Healthcare Delivery. The application of engineering and IT methods in medicine is a rapidly growing field with many opportunities for innovation. The Proceedings are composed of 3 volumes: Volume 1 - Information Systems, Control & Interoperability Volume 2 - Industrial Engineering Volume 3 - Operational Research * 3-volume set, containing 362 carefully reviewed and selected papers * presenting the state-of-the-art in international research and development in Information Control problems in Manufacturing

Download or read book Control and Dynamic Systems V48 Manufacturing and Automation Systems Techniques and Technologies written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 48: Manufacturing and Automation Systems: Techniques and Technologies, Part 4 of 5 deals with techniques and technologies in manufacturing and automation systems. This book begins by discussing the advances of techniques for measuring the effectiveness of investments in automation and manufacturing systems. It then turns to graphical concurrent modeling language (GCML), a program used to model and analyze discrete manufacturing systems. This book also presents techniques for modeling solids; strategies for design optimization of machine products; design and control of industrial robots; and other optimization methodologies for manufacturing, robotic, and automation systems. This book will provide a uniquely significant reference for those who are interested in manufacturing, robotics, and automation systems.

Download or read book Algorithms for Scheduling Problems written by FrankWerner and published by MDPI. This book was released on 2018-08-24 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Algorithms for Scheduling Problems" that was published in Algorithms

Download or read book Stochastic Theory and Control written by Bozenna Pasik-Duncan and published by Springer. This book was released on 2003-07-01 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains almost all of the papers that were presented at the Workshop on Stochastic Theory and Control that was held at the Univ- sity of Kansas, 18–20 October 2001. This three-day event gathered a group of leading scholars in the ?eld of stochastic theory and control to discuss leading-edge topics of stochastic control, which include risk sensitive control, adaptive control, mathematics of ?nance, estimation, identi?cation, optimal control, nonlinear ?ltering, stochastic di?erential equations, stochastic p- tial di?erential equations, and stochastic theory and its applications. The workshop provided an opportunity for many stochastic control researchers to network and discuss cutting-edge technologies and applications, teaching and future directions of stochastic control. Furthermore, the workshop focused on promoting control theory, in particular stochastic control, and it promoted collaborative initiatives in stochastic theory and control and stochastic c- trol education. The lecture on “Adaptation of Real-Time Seizure Detection Algorithm” was videotaped by the PBS. Participants of the workshop have been involved in contributing to the documentary being ?lmed by PBS which highlights the extraordinary work on “Math, Medicine and the Mind: Discovering Tre- ments for Epilepsy” that examines the e?orts of the multidisciplinary team on which several of the participants of the workshop have been working for many years to solve one of the world’s most dramatic neurological conditions. Invited high school teachers of Math and Science were among the part- ipants of this professional meeting.

Download or read book Maintenance Modeling and Optimization written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production costs are being reduced by automation, robotics, computer-integrated manufacturing, cost reduction studies and more. These new technologies are expensive to buy, repair, and maintain. Hence, the demand on maintenance is growing and its costs are escalating. This new environment is compelling industrial maintenance organizations to make the transition from fixing broken machines to higher-level business units for securing production capacity. On the academic front, research in the area of maintenance management and engineering is receiving tremendous interest from researchers. Many papers have appeared in the literature dealing with the modeling and solution of maintenance problems using operations research (OR) and management science (MS) techniques. This area represents an opportunity for making significant contributions by the OR and MS communities. Maintenance, Modeling, and Optimization provides in one volume the latest developments in the area of maintenance modeling. Prominent scholars have contributed chapters covering a wide range of topics. We hope that this initial contribution will serve as a useful informative introduction to this field that may permit additional developments and useful directions for more research in this fast-growing area. The book is divided into six parts and contains seventeen chapters. Each chapter has been subject to review by at least two experts in the area of maintenance modeling and optimization. The first chapter provides an introduction to major maintenance modeling areas illustrated with some basic models. Part II contains five chapters dealing with maintenance planning and scheduling. Part III deals with preventive maintenance in six chapters. Part IV focuses on condition-based maintenance and contains two chapters. Part V deals with integrated production and maintenance models and contains two chapters. Part VI addresses issues related to maintenance and new technologies, and also deals with Just-in-Time (JIT) and Maintenance.

Download or read book Models and Methods in Economics and Management Science written by Fouad El Ouardighi and published by Springer Science & Business Media. This book was released on 2013-09-16 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this book, distinguished and notable contributors wish to honor Professor Charles S. Tapiero’s scientific achievements. Although it covers only a few of the directions Professor Tapiero has taken in his work, it presents important modern developments in theory and in diverse applications, as studied by his colleagues and followers, further advancing the topics Tapiero has been investigating. The book is divided into three parts featuring original contributions covering the following areas: general modeling and analysis; applications to marketing, economy and finance; and applications to operations and manufacturing. Professor Tapiero is among the most active researchers in control theory; in the late sixties, he started to enthusiastically promote optimal control theory along with differential games, successfully applying it to diverse problems ranging from classical operations research models to finance, risk and insurance, marketing, transportation and operations management, conflict management and game theory, engineering, regional and urban sciences, environmental economics, and organizational behavior. Over the years, Professor Tapiero has produced over 300 papers and communications and 14 books, which have had a major impact on modern theoretical and applied research. Notable among his numerous pioneering scientific contributions are the use of graph theory in the behavioral sciences, the modeling of advertising as a random walk, the resolution of stochastic zero-sum differential games, the modeling of quality control as a stochastic competitive game, and the development of impulsive control methods in management. Charles Tapiero’s creativity applies both in formulating original issues, modeling complex phenomena and solving complex mathematical problems.

Download or read book Optimization Models and Concepts in Production Management written by Bradimaarte and published by CRC Press. This book was released on 1995-04-13 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization techniques in production management are becoming increasingly important for efficient and competitive manufacturing. This book presents a collection of tutorial papers by outstanding researchers on the application of optimization concepts. Topics introduced include hierarchical production planning and large scale scheduling, optimal production control, exact and heuristic algorithms for production scheduling and stochastic modelling.