Download or read book Optimal Design of Flexible Manufacturing Systems written by Ulrich A.W. Tetzlaff and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible manufacturing systems are complex production systems with considerable high investment costs. This book intends to show the reader how the design of such a system can be optimized. Thereby it addresses the academic world in management science and industrial engineering as well as system planners in industry. First the design problems are analysed in detail and a planning concept is presented. Afterwards possible tools for the design process are described, as there are: mathematical programming, queueing networks, computer simulation, perturbation analysis, petri nets, group technology, and knowledge based systems. The major part of the book, however, concerns the description of existing optimization models based on mathematical programming. Each model is explained and discussed in detail and for new models, developed by the author, numerical examples are given. Finally some distinct guidelines are presented which help the system planners to select the appropriate model for their planning problems.

Download or read book Optimal Design of Flexible Manufacturing Systems written by U. Tetzlaff and published by . This book was released on 1990-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems written by Horst Tempelmeier and published by John Wiley & Sons. This book was released on 1993-10-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now, this comprehensive and systematic overview of both the design models and quantitative solution methods for FMS support, configuration, and operation rectifies that problem. Students, production managers/planners, and FMS installation planners can now find everything they need in one authoritative and up-to-date source.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Computer Integrated Manufacturing Iccim 91 Manufacturing Enterprises Of The 21st Century Proceedings Of The International Conference written by B S Lim and published by World Scientific. This book was released on 1991-10-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 21st century, computer integrated manufacturing (CIM) systems will not only be the economic development tools but will also be the essential means of achieving a higher level of flexibility, cohesiveness and performance. CIM systems are beginning to settle into our society and industries, with greater emphasis on the integration of economic, cultural and social aspects together with design, planning, factory automation and artificial intelligent systems.This volume of proceedings brings together 10 keynote and invited speaker addresses, and over 180 papers by practitioners from 28 countries. It documents current research and in-depth studies on the fundamental aspects of advanced CIM systems and their practical applications. The papers fall into 3 main sections: CIM Related Issues; Industrial AI Applications Aspects; and Concurrent Engineering, Advanced Design, Simulation and Flexible Manufacturing Systems.

Download or read book Manufacturing and Service Enterprise with Risks written by Masayuki Matsui and published by Springer Science & Business Media. This book was released on 2008-10-09 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject for this book is my life work on the enterprise modeling and integration by a stochastic/queuing form, and the book plan was conceived before my stay in the USA in 1996–97 as a visiting scholar. The rst title was “Stochastic Management and Design of Manufacturing Systems.” The rst version was attempted in 2001; however, this version was inappropriate and was not revised till now. It is 40 years since I attempted a stochastic approach to manufacturing and management due to the limitations of statistical approaches. The century in which industrial engineering and management rose to the forefront was one in which a static/statistical approach was applied to the development of classical models and general/average theory. This book presents a stochastic management approach to the manufacturing and service enterprise with risks by a game/strategic view, and is based on many papers in production/queueing studies that have appeared in famous journals. The book’s objective is to discuss and show the goals and constraints on manufacturing and service enterprises, and to provide a strategic/collaborative solution for management with risks in heterogeneity. This book mainly focuses on the three manufacturing classes: continuous, poi- wise, and exible stream types under risks. These manufacturing streams are rst studied using the respective stochastic processes, and are characterized and dev- oped as a queueing/strategic control problem of look-ahead/buffer, selection/swit- over, and arrangement/routings. Moreover, the behaviors of some design/control variables are shown and useful theories for design are established.

Download or read book Algorithmic Approach of Design Optimization in Flexible Manufacturing Systems written by Youngsoo Lee and published by . This book was released on 1986 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Queueing Theory in Manufacturing Systems Analysis and Design written by H.T. Papadopolous and published by Springer Science & Business Media. This book was released on 1993-09-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of the book is to acquaint the reader with the use of queueing theory in the analysis of manufacturing systems.

Download or read book Flexible Manufacturing Systems Recent Developments written by A. Raouf and published by Elsevier. This book was released on 1995-02-09 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) involve substituting machines capable of performing a wide and redefinable variety of tasks for machines dedicated to the performance of specific tasks. FMS can also be programmed to handle new products, thus extending the machines' life cycles. Thus they represent a change from "standardized goods produced by customized machines" to "customized goods produced by standardized machines". This volume contains new and updated material in this field, and will be of great interest to researchers, managers and students concerned with problems related to flexible manufacturing systems.

Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.

Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.

Download or read book Design and Management of Manufacturing Systems written by Arkadiusz Gola and published by MDPI. This book was released on 2021-09-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the design and management of manufacturing systems have been explored in the literature for many years now, they still remain topical problems in the current scientific research. The changing market trends, globalization, the constant pressure to reduce production costs, and technical and technological progress make it necessary to search for new manufacturing methods and ways of organizing them, and to modify manufacturing system design paradigms. This book presents current research in different areas connected with the design and management of manufacturing systems and covers such subject areas as: methods supporting the design of manufacturing systems, methods of improving maintenance processes in companies, the design and improvement of manufacturing processes, the control of production processes in modern manufacturing systems production methods and techniques used in modern manufacturing systems and environmental aspects of production and their impact on the design and management of manufacturing systems. The wide range of research findings reported in this book confirms that the design of manufacturing systems is a complex problem and that the achievement of goals set for modern manufacturing systems requires interdisciplinary knowledge and the simultaneous design of the product, process and system, as well as the knowledge of modern manufacturing and organizational methods and techniques.

Download or read book Designing Innovations in Industrial Logistics Modelling written by A. Kusiak and published by CRC Press. This book was released on 2021-05-31 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Innovations in Industrial Logistics Modelling describes practical methods for approaching the task of designing industrial logistics systems. It surveys the development of logistics models and their application in manufacturing to designing, planning, and implementing the movement of supplies, equipment, and products. This text/reference book discusses the combination of operation and production research to obtain solutions for designing and integrating advanced logistics systems. It provides the reader with a set of prescriptive and descriptive models and methods that have been developed exclusively for the purpose of designing, managing, and optimizing the architecture of such advanced systems. The design and application of new tools and methods is presented in such a way that emphasizes the competitiveness of manufacturing industries, and case studies are presented in a manner that demonstrates successful models and methods in advanced industrial logistics systems. In addition, Designing Innovations in Industrial Logistics Modelling explains the various formal tools and methodologies employed in evaluating new programs and covers program management and dynamic evaluation techniques.

Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.

Download or read book Handbook of Expert Systems Applications in Manufacturing Structures and rules written by A. Mital and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at both researchers and practitioners, and provides a collection of expert systems in manufacturing and production engineering along with their knowledge base and rules. We believe that inclusion of the knowledge base and associated rules is essential if practitioners are to derive full benefit from these expert systems. This unique book is the result of our belief and the efforts of our distinguished colleagues who subscribe to this philosophy. A total of 15 different expert systems are included in this book. These expert systems are preceded by an introductory chapter written by Kuo, Preface XVll Mital and Anand. The expert system rules are included on a floppy disk in ASCII and can be easily accessed. These rules and the description of the expert system's structure should assist the users in customizing these systems. Overall, the expert systems included in this volume cover a fairly wide variety of manufacturing and production engineering topics.

Download or read book Proceedings of the 5th International Conference on Flexible Manufacturing Systems written by Keith Rathmill and published by Springer. This book was released on 2013-11-27 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Production Management Systems written by E. Eloranta and published by Elsevier. This book was released on 2012-12-02 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided into four sections: invited papers, principles, systems and techniques. The invited papers form an extensive overview of the state-of-the-art of production management. The themes range from the everlasting hunt for better productivity to the implications of CIM architectures (particularly CIM-OSA) for production management. The other three sections of the book look at the various problems affecting production management. One of the characteristics of modern production management is the need for better principles, systems and techniques for interorganizational production management. Another topic of crucial relevance is the necessity to master not only repetitive manufacturing but also one-of-a-kind product manufacturing. From the managerial point of view, the forecast-based make-to-stock principles have proven insufficient, with market forces demanding fast and reliable deliveries of customer-oriented products. The goals of production management have been re-evaluated as a result.