Download or read book Optimal and Robust Control of Robot Manipulators written by Michael Thomas Grabbe and published by . This book was released on 1992 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Torque Optimization for Robust Control of Robot Manipulators written by Mark W. Spong and published by . This book was released on 1984 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Control of Robots written by Adriano A. G. Siqueira and published by Springer Science & Business Media. This book was released on 2011-08-14 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control of Robots bridges the gap between robust control theory and applications, with a special focus on robotic manipulators. It is divided into three parts: robust control of regular, fully-actuated robotic manipulators; robust post-failure control of robotic manipulators; and robust control of cooperative robotic manipulators. In each chapter the mathematical concepts are illustrated with experimental results obtained with a two-manipulator system. They are presented in enough detail to allow readers to implement the concepts in their own systems, or in Control Environment for Robots, a MATLAB®-based simulation program freely available from the authors. The target audience for Robust Control of Robots includes researchers, practicing engineers, and graduate students interested in implementing robust and fault tolerant control methodologies to robotic manipulators.

Download or read book Robust Control and Adaptive Robust Control of Robot Manipulators written by Gangbing Song and published by . This book was released on 1995 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Tracking Control of Robot Manipulators written by Zhihua Qu and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the latest research in the field, Robust Tracking Control of Robot Manipulators is the first book to provide systematic methods for stabilizing unwanted flexible, uncertain, and unmodeled dynamics. The authors present a thorough comparison of state-of-the-art and classical designs of all controls: linear or nonlinear (simple or complicated), conventional or robust, adaptive or learning. Focusing on control design and performance analysis, this book will help you to apply advanced controls effectively and to establish equivalent and different robustness. This book will be invaluable as a guide to researchers and practicing engineers in the field of robot control, automation, and robotic engineering. It will also serve as a useful reference for control of robot manipulators and mechanical-electrical systems.

Download or read book Incremental Optimal Control for Robot Manipulators A Robust and Optimal Control Framework written by Yongchao Wang and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Robot Manipulators written by Frank L. Lewis and published by MacMillan Publishing Company. This book was released on 1993 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Control of Robot Manipulators During Non contact and Contact Tasks written by Lilong Cai and published by . This book was released on 1990 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kinematics and Robust Control of Robot Manipulators written by Tesfay Meressi and published by . This book was released on 1993 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Studies of Flexible Robotic Manipulators written by Fei-Yue Wang and published by World Scientific. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators. Sample Chapter(s). Chapter 1: Flexible-link Manipulators: Modeling, Nonlinear Control and Observer (235 KB). Contents: Flexible-Link Manipulators: Modeling, Nonlinear Control and Observer (M A Arteaga & B Siciliano); Energy-Based Control of Flexible Link Robots (S S Ge); Trajectory Planning and Compliant Control for Two Manipulators to Deform Flexible Materials (O Al-Jarrah et al.); Force Control of Flexible Manipulators (F Matsuno); Experimental Study on the Control of Flexible Link Robots (D Wang); Sensor Output Feedback Control of Flexible Robot Arms (Z-H Luo); On GA Based Robust Control of Flexible Manipulators (Z-Q Xiao & L-L Cui); Analysis of Poles and Zeros for Tapered Link Designs (D L Girvin & W J Book); Optimum Shape Design of Flexible Manipulators with Tip Loads (J L Russell & Y-Q Gao); Mechatronic Design of Flexible Manipulators (P-X Zhou & Z-Q Xiao); A Comprehensive Study of Dynamic Behaviors of Flexible Robotic Links: Modeling and Analysis (Y-Q Gao & F-Y Wang). Readership: Researchers, lecturers and graduate students in robotics & automated systems, electrical & electronic engineering, and industrial engineering

Download or read book Robot Manipulator Control written by Frank L. Lewis and published by CRC Press. This book was released on 2003-12-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot Manipulator Control offers a complete survey of control systems for serial-link robot arms and acknowledges how robotic device performance hinges upon a well-developed control system. Containing over 750 essential equations, this thoroughly up-to-date Second Edition, the book explicates theoretical and mathematical requisites for controls design and summarizes current techniques in computer simulation and implementation of controllers. It also addresses procedures and issues in computed-torque, robust, adaptive, neural network, and force control. New chapters relay practical information on commercial robot manipulators and devices and cutting-edge methods in neural network control.

Download or read book Robust Control Systems with Genetic Algorithms written by Mo Jamshidi and published by CRC Press. This book was released on 2018-10-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, new paradigms have emerged to replace-or augment-the traditional, mathematically based approaches to optimization. The most powerful of these are genetic algorithms (GA), inspired by natural selection, and genetic programming, an extension of GAs based on the optimization of symbolic codes. Robust Control Systems with Genetic Algorithms builds a bridge between genetic algorithms and the design of robust control systems. After laying a foundation in the basics of GAs and genetic programming, it demonstrates the power of these new tools for developing optimal robust controllers for linear control systems, optimal disturbance rejection controllers, and predictive and variable structure control. It also explores the application of hybrid approaches: how to enhance genetic algorithms and programming with fuzzy logic to design intelligent control systems. The authors consider a variety of applications, such as the optimal control of robotic manipulators, flexible links and jet engines, and illustrate a multi-objective, genetic algorithm approach to the design of robust controllers with a gasification plant case study. The authors are all masters in the field and clearly show the effectiveness of GA techniques. Their presentation is your first opportunity to fully explore this cutting-edge approach to robust optimal control system design and exploit its methods for your own applications.

Download or read book Adaptive Control of Mechanical Manipulators written by John J. Craig and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Control Design An Optimal Control Approach written by Feng Lin and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and accessible guide to the three main approaches to robust control design and its applications Optimal control is a mathematical field that is concerned with control policies that can be deduced using optimization algorithms. The optimal control approach to robust control design differs from conventional direct approaches to robust control that are more commonly discussed by firstly translating the robust control problem into its optimal control counterpart, and then solving the optimal control problem. Robust Control Design: An Optimal Control Approach offers a complete presentation of this approach to robust control design, presenting modern control theory in an concise manner. The other two major approaches to robust control design, the H_infinite approach and the Kharitonov approach, are also covered and described in the simplest terms possible, in order to provide a complete overview of the area. It includes up-to-date research, and offers both theoretical and practical applications that include flexible structures, robotics, and automotive and aircraft control. Robust Control Design: An Optimal Control Approach will be of interest to those needing an introductory textbook on robust control theory, design and applications as well as graduate and postgraduate students involved in systems and control research. Practitioners will also find the applications presented useful when solving practical problems in the engineering field.

Download or read book Robust Control of Robot Manipulators microform Theory and Experiments written by Guangjun Liu and published by National Library of Canada = Bibliothèque nationale du Canada. This book was released on 1996 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robot Manipulators written by Agustin Jimenez and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research advances in robot manipulators. It offers a complete survey to the kinematic and dynamic modelling, simulation, computer vision, software engineering, optimization and design of control algorithms applied for robotic systems. It is devoted for a large scale of applications, such as manufacturing, manipulation, medicine and automation. Several control methods are included such as optimal, adaptive, robust, force, fuzzy and neural network control strategies. The trajectory planning is discussed in details for point-to-point and path motions control. The results in obtained in this book are expected to be of great interest for researchers, engineers, scientists and students, in engineering studies and industrial sectors related to robot modelling, design, control, and application. The book also details theoretical, mathematical and practical requirements for mathematicians and control engineers. It surveys recent techniques in modelling, computer simulation and implementation of advanced and intelligent controllers.

Download or read book Robust Control of Flexible Joint Robot Manipulators written by John York Hung and published by . This book was released on 1989 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of robot manipulator controller design in the presence of joint flexibility is addressed. The specific goal is to design a controller that yields good tracking performance in spite of parametric uncertainty. Feedback linearization, robust observers, singular perturbation technique, and adaptive control are different approaches that are theoretically analyzed. Experimental results on a single-link, flexible joint arm are also presented. Although each controller has its advantages and drawbacks, all of the design methods yield improved performance when compared to controller designs based upon rigid joint models.