Download or read book Optical Manufacturing and Testing written by and published by . This book was released on 1999 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.
Download or read book Contemporary Methods of Optical Manufacturing and Testing written by Gregory M. Sanger and published by . This book was released on 1983 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optics Manufacturing written by Christoph Gerhard and published by CRC Press. This book was released on 2017-12-14 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical components are essential key elements in modern engineering and everyday life. The education of skilled personnel and specialists in the fields of theoretical and practical optics manufacturing is of essential importance for next-generation technologies. Against this background, this book provides the basis for the education and advanced training of precision and ophthalmic optics technicians, craftsmen, and foremen, and it is an extensive reference work for students, academics, optical designers or shop managers, and production engineers. It not only covers particularly used and applied machines, working materials, testing procedures, and machining steps for classical optics manufacturing, but it also addresses the production and specification of optical glasses as well as unconventional production techniques and novel approaches. Optics Manufacturing: Components and Systems furthermore covers the basics of light propagation and provides an overview on optical materials and components; presents an introduction and explanation of the necessary considerations and procedures for the initial definition of manufacturing tolerances and the relevant industrial standards for optics manufacturing; and addresses the production of micro optics, the assembly of opto-mechanical setups and possible manufacturing errors, and the impact of the resulting inaccuracies. In order to allow fast and clear access to the most essential information, each chapter ends with a short summary of the most important aspects, including an explanation of relevant equations, symbols, and abbreviations. For further reading, extensive lists of references are also provided. Finally, exercises on the covered basic principles of optics, approaches, and techniques of optics manufacturing—including their corresponding detailed solutions—are found in the appendix.
Download or read book Form Profiling of Optics Using the Geometry Measuring Machine and the M 48 CMM at NIST written by and published by DIANE Publishing. This book was released on with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Harnessing Light written by National Research Council and published by National Academies Press. This book was released on 1998-09-25 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical science and engineering affect almost every aspect of our lives. Millions of miles of optical fiber carry voice and data signals around the world. Lasers are used in surgery of the retina, kidneys, and heart. New high-efficiency light sources promise dramatic reductions in electricity consumption. Night-vision equipment and satellite surveillance are changing how wars are fought. Industry uses optical methods in everything from the production of computer chips to the construction of tunnels. Harnessing Light surveys this multitude of applications, as well as the status of the optics industry and of research and education in optics, and identifies actions that could enhance the field's contributions to society and facilitate its continued technical development.
Download or read book Micro and Precision Manufacturing written by Kapil Gupta and published by Springer. This book was released on 2017-10-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details on various micro and precision manufacturing and finishing operations performed by conventional and advanced processes, including micro-manufacturing of micro-tools and precision finishing of engineered components. It describes the process mechanism, principles and parameters while performing micro-fabrication and precision finishing operations. The text provides the readers with knowledge of micro and precision manufacturing and encourages them to explore the future venues in this field.
Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by Taylor & Francis. This book was released on 2016-04-19 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today's high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods
Download or read book Handbook of Optical Systems Volume 5 written by Bernd D¿rband and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: The state-of-the-art full-colored handbook gives a comprehensive introduction to the principles and the practice of calculation, layout, and understanding of optical systems and lens design. Written by reputed industrial experts in the field, this text introduces the user to the basic properties of optical systems, aberration theory, classification and characterization of systems, advanced simulation models, measuring of system quality and manufacturing issues. In this Volume Volume 5 topics comprise the methods of measuring the properties of optical systems. The different fundamental techniques, such as propagation measurement and polarimetry, are introduced and discussed in detail and clarity. The presentation allows the reader, after having devised an optical system, to perform the measurements best suited to ascertain that the system fulfills the specific needs and requirements. The following chapters provide a survey on materials, coatings and surfaces of optical components, and combine this with a treatment of light and radiation. The book thus serves as a one-stop reference for metrology of optical systems. Other Volumes Volume 1: Fundamentals of Technical Optics Volume 2: Physical Image Formation Volume 3: Aberration Theory and Correction of Optical Systems Volume 4: Survey of Optical Instruments
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1995 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optics Inspections and Tests written by Michael Hausner and published by SPIE-International Society for Optical Engineering. This book was released on 2016-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book instructs inspectors and designers of optical elements and assemblies with the primary means of inspection and testing, as well as the relevant tools and instruments"--
Download or read book Field Guide to Optical Fabrication written by Ray Williamson and published by SPIE-International Society for Optical Engineering. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides optical designers, shop managers, opticians, and purchasers a concise reference explaining what the designer needs to know before making final choices and how to specify the components before they are ordered. It presents how conventional fabrication proceeds for representative components, alternative and emerging methods to optical fabrication, product evaluation, and the calculations used.
Download or read book Optical Shop Testing written by Daniel Malacara and published by John Wiley & Sons. This book was released on 2007-08-03 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this third edition is to bring together in a single book descriptions of all tests carried out in the optical shop that are applicable to optical components and systems. This book is intended for the specialist as well as the non-specialist engaged in optical shop testing. There is currently a great deal of research being done in optical engineering. Making this new edition very timely.
Download or read book Micromanufacturing Processes written by V.K. Jain and published by CRC Press. This book was released on 2016-04-19 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools,
Download or read book Materials Science and Technology of Optical Fabrication written by Tayyab I. Suratwala and published by John Wiley & Sons. This book was released on 2018-10-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamental science of grinding and polishing by examining the chemical and mechanical interactions over many scale lengths Manufacturing next generation optics has been, and will continue to be, enablers for enhancing the performance of advanced laser, imaging, and spectroscopy systems. This book reexamines the age-old field of optical fabrication from a materials-science perspective, specifically the multiple, complex interactions between the workpiece (optic), slurry, and lap. It also describes novel characterization and fabrication techniques to improve and better understand the optical fabrication process, ultimately leading to higher quality optics with higher yield. Materials Science and Technology of Optical Fabrication is divided into two major parts. The first part describes the phenomena and corresponding process parameters affecting both the grinding and polishing processes during optical fabrication. It then relates them to the critical resulting properties of the optic (surface quality, surface figure, surface roughness, and material removal rate). The second part of the book covers a number of related topics including: developed forensic tools used to increase yield of optics with respect to surface quality (scratch/dig) and fracture loss; novel characterization and fabrication techniques used to understand/quantify the fundamental phenomena described in the first part of the book; novel and recent optical fabrication processes and their connection with the fundamental interactions; and finally, special techniques utilized to fabricate optics with high damage resistance. Focuses on the fundamentals of grinding and polishing, from a materials science viewpoint, by studying the chemical and mechanical interactions/phenomena over many scale lengths between the workpiece, slurry, and lap Explains how these phenomena affect the major characteristics of the optic workpiece—namely surface figure, surface quality, surface roughness, and material removal rate Describes methods to improve the major characteristics of the workpiece as well as improve process yield, such as through fractography and scratch forensics Covers novel characterization and fabrication techniques used to understand and quantify the fundamental phenomena of various aspects of the workpiece or fabrication process Details novel and recent optical fabrication processes and their connection with the fundamental interactions Materials Science and Technology of Optical Fabrication is an excellent guidebook for process engineers, fabrication engineers, manufacturing engineers, optical scientists, and opticians in the optical fabrication industry. It will also be helpful for students studying material science and applied optics/photonics.
Download or read book Reflecting Telescope Optics II written by Raymond N. Wilson and published by Springer Science & Business Media. This book was released on 2001-07-17 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by the designer of the worlds largest telescope, the VLT in Chile, covers the essential modern developments in telescope optics. In the last twenty years, modern technology has revolutionized not only manufacturing and test procedures but also the entire area of quality specification. In addition to these topics, the book also covers the alignment of telescope optics, atmospheric optics, adaptive optics, reflective coatings, and ancillary equipment. Richly illustrated, this work covers important modern techniques, which makes it one of the most complete references on telescope optics.
Download or read book Optical Fabrication Testing written by and published by . This book was released on 2002 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
