Download or read book Optical Frequency Standards Hertz Level Working Standards and Their Absolute Frequency Measurement written by and published by . This book was released on 1994 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Promising optical frequency/wavelength standards in the visible based on neutral atoms and precise laser sources are studied. In particular we have developed high accuracy systems using diode-lasers with calcium atoms and also diode-pumped Yag-lasers with Iodine molecules. An actual frequency measurement of the Iodine transition at 532 nm is made with the frequency doubled Yag system. On the calcium transition at 657 nm in the red, optical Ramsey-fringes as narrow as 10 kHz have been observed with a high signal-to-noise ratio using diode lasers. High resolution multi-photon spectroscopy on laser cooled and trapped atoms (Na and Cs) have also been explored. In these pursuits, significant new diode-laser and frequency- measurement technology has been developed, including; highly stabilized diode and Yag lasers, the ability to coherently measure the frequency difference between two lasers to as high as approx. 700GHz, and the extension of the spectral coverage of diode laser sources to the blue (for laser cooling of calcium) and IR spectral regions by using nonlinear optical techniques. jg.
Download or read book Frequency Standards written by Fritz Riehle and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency. This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards from atomic clocks, to frequency stabilised lasers. The whole is rounded of with a discussion of topical applications in engineering, telecommunications, and metrology.
Download or read book Proceedings of the 6th Symposium on Frequency Standards and Metrology written by Patrick Gill and published by World Scientific. This book was released on 2002 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest research ideas with application to frequency standards (e.g. optical clocks) and assesses ideas from previous symposia which have undergone critical analysis.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frequency Standards And Metrology Proceedings Of The Fifth Symposium written by James Charles Bergquist and published by World Scientific. This book was released on 1996-05-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Frequency Standards and Metrology serves as an international forum for discussion of precision frequency standards throughout the electromagnetic spectrum and associated metrology. The symposium focuses on the fundamental aspects of the latest ideas, results and applications in relation to these frequency standards.
Download or read book Frequency Measurement and Control written by Andre N. Luiten and published by Springer Science & Business Media. This book was released on 2003-07-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text on precision frequency measurement and its key enabling techniques includes reviews written by some of the most experienced researchers in their respective fields. This text should prove useful to researchers just entering the field of frequency metrology and standards, or equally well to the experienced practitioner.
Download or read book Frequency Standards and Metrology written by Lute Maleki and published by World Scientific. This book was released on 2009 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on Frequency Standards and Metrology is an event held approximately every seven years, and is regarded as the premier conference in the field of advanced clocks and oscillators together with their applications in science and metrology. This series began with the first meeting at Universiteacute; Laval, Quebec Canada in 1971, and the last one was held in 2001 at the University of St. Andrews, Scotland. The 7th Symposium on Frequency Standards and Metrology is scheduled for October 5ndash;11, 2008 at the Asilomar Conference Grounds in Pacific Grove, California, USA. The Symposium is intended as a forum for bringing together international scientists and technologists engaged in the development of precise frequency standards and clocks, the study of their underlying physics, and their applications in metrology and tests of fundamental laws. The symposium has been traditionally held in a venue that promotes exchange of information on emerging ideas and latest achievements in the field, with a single-session approach which includes oral presentations by invitation, poster session(s) and keynote talks from internationally-recognized speakers. The program also includes social and other events aimed at promoting the exchange of technical and scientific information.
Download or read book Quantum Metrology written by Ernst O. Göbel and published by John Wiley & Sons. This book was released on 2015-06-10 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International System of Units (SI) is the world's most widely used system of measurement, used every day in commerce and science, and is the modern form of the metric system. It currently comprises the meter (m), the kilogram (kg), the second (s), the ampere (A), the kelvin (K), the candela (cd) and the mole (mol)). The system is changing though, units and unit definitions are modified through international agreements as the technology of measurement progresses, and as the precision of measurements improves. The SI is now being redefined based on constants of nature and their realization by quantum standards. Therefore, the underlying physics and technologies will receive increasing interest, and not only in the metrology community but in all fields of science. This book introduces and explains the applications of modern physics concepts to metrology, the science and the applications of measurements. A special focus is made on the use of quantum standards for the realization of the forthcoming new SI (the international system of units). The basic physical phenomena are introduced on a level which provides comprehensive information for the experienced reader but also provides a guide for a more intense study of these phenomena for students.
Download or read book The New International System of Units SI written by Ernst O. Göbel and published by John Wiley & Sons. This book was released on 2019-09-16 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International System of Units, the SI, provides the foundation for all measurements in science, engineering, economics, and society. The SI has been fundamentally revised in 2019. The new SI is a universal and highly stable unit system based on invariable constants of nature. Its implementation rests on quantum metrology and quantum standards, which base measurements on the manipulation and counting of single quantum objects, such as electrons, photons, ions, and flux quanta. This book explains and illustrates the new SI, its impact on measurements, and the quantum metrology and quantum technology behind it. The book is based on the book ?Quantum Metrology: Foundation of Units and Measurements? by the same authors. From the contents: -Measurement -The SI (Système International d?Unités) -Realization of the SI Second: Thermal Beam Cs Clock, Laser Cooling, and the Cs Fountain Clock -Flux Quanta, Josephson Effect, and the SI Volt -Quantum Hall Effect, the SI Ohm, and the SI Farad -Single-Charge Transfer Devices and the SI Ampere -The SI Kilogram, the Mole, and the Planck constant -The SI Kelvin and the Boltzmann Constant -Beyond the present SI: Optical Clocks and Quantum Radiometry -Outlook
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This forth volume covers laser applications in the medical, metrology and communications fields. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Laser Frequency Stabilization Standards Measurement and Applications written by John L. Hall and published by SPIE-International Society for Optical Engineering. This book was released on 2001 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics With Trapped Charged Particles Lectures From The Les Houches Winter School written by Richard C Thompson and published by World Scientific. This book was released on 2014-01-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of articles on Physics with Trapped Charged Particles by speakers at the Les Houches Winter School. The articles cover all types of physics with charged particles, and are aimed at introducing the basic issues at hand, as well as the latest developments in the field. It is appropriate for PhD students and early career researchers, or interested parties new to the area.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Aspects of Trapped Ion Mass Spectrometry Volume V written by Raymond E. March and published by CRC Press. This book was released on 2016-04-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in medical research, pharmaceutical and fine chemicals industries, biological and physical sciences, and security and environmental agencies, mass spectrometry techniques are continually under development. In Practical Aspects of Trapped Ion Mass Spectrometry: Volume V, Applications of Ion Trapping Devices, an international panel of aut
Download or read book Solid State Lasers and Applications written by Alphan Sennaroglu and published by CRC Press. This book was released on 2017-12-19 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the favorable characteristics of solid-state lasers, they have become the preferred candidates for a wide range of applications in science and technology, including spectroscopy, atmospheric monitoring, micromachining, and precision metrology. Presenting the most recent developments in the field, Solid-State Lasers and Applications focuses on the design and applications of solid-state laser systems. With contributions from leading international experts, the book explores the latest research results and applications of solid-state lasers as well as various laser systems. The beginning chapters discuss current developments and applications of new solid-state gain media in different wavelength regions, including cerium-doped lasers in the ultraviolet range, ytterbium lasers near 1μm, rare-earth ion-doped lasers in the eye-safe region, and tunable Cr2+:ZnSe lasers in the mid-infrared range. The remaining chapters study specific modes of operation of solid-state laser systems, such as pulsed microchip lasers, high-power neodymium lasers, ultrafast solid-state lasers, amplification of femtosecond pulses with optical parametric amplifiers, and noise characteristics of solid-state lasers. Solid-State Lasers and Applications covers the most important aspects of the field to provide current, comprehensive coverage of solid-state lasers.
Download or read book Femtosecond Optical Frequency Comb Principle Operation and Applications written by Jun Ye and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years, there has been a convergence between the fields of ultrafast science, nonlinear optics, optical frequency metrology, and precision laser spectroscopy. These fields have been developing largely independently since the birth of the laser, reaching remarkable levels of performance. On the ultrafast frontier, pulses of only a few cycles long have been produced, while in optical spectroscopy, the precision and resolution have reached one part in Although these two achievements appear to be completely disconnected, advances in nonlinear optics provided the essential link between them. The resulting convergence has enabled unprecedented advances in the control of the electric field of the pulses produced by femtosecond mode-locked lasers. The corresponding spectrum consists of a comb of sharp spectral lines with well-defined frequencies. These new techniques and capabilities are generally known as “femtosecond comb technology. ” They have had dramatic impact on the diverse fields of precision measurement and extreme nonlinear optical physics. The historical background for these developments is provided in the Foreword by two of the pioneers of laser spectroscopy, John Hall and Theodor Hänsch. Indeed the developments described in this book were foreshadowed by Hänsch’s early work in the 1970s when he used picosecond pulses to demonstrate the connection between the time and frequency domains in laser spectroscopy. This work complemented the advances in precision laser stabilization developed by Hall.
Download or read book Frequency Standards And Metrology Procs Of The 6th Symposium written by Patrick Gill and published by World Scientific. This book was released on 2002-05-24 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest research ideas with application to frequency standards (e.g. optical clocks) and assesses ideas from previous symposia which have undergone critical analysis.
