Download or read book Atmospheric Pressure Plasma written by Anton Nikiforov and published by BoD – Books on Demand. This book was released on 2019-04-24 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma as the fourth state of matter is an ionized gas consisting of both negative and positive ions, electrons, neutral atoms, radicals, and photons. In the last few decades, atmospheric-pressure plasmas have started to attract increasing attention from both scientists and industry due to a variety of potential applications. Because of increasing interest in the topic, the focus of this book is on providing engineers and scientists with a fundamental understanding of the physical and chemical properties of different atmospheric-pressure plasmas via plasma diagnostic techniques and their applications. The book has been organized into two parts. Part I focuses on the latest achievements in advanced diagnostics of different atmospheric-pressure plasmas. Part II deals with applications of different atmospheric-pressure plasmas.
Download or read book Plasma Diagnostics written by Orlando Auciello and published by Academic Press. This book was released on 2013-10-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Diagnostics, Volume 1: Discharge Parameters and Chemistry covers seven chapters on the important diagnostic techniques for plasmas and details their use in particular applications. The book discusses optical diagnostic techniques for low pressure plasmas and plasma processing; plasma diagnostics for electrical discharge light sources; as well as Langmuir probes. The text also describes the mass spectroscopy of plasmas, microwave diagnostics, paramagnetic resonance diagnostics, and diagnostics in thermal plasma processing. Electrical engineers, nuclear engineers, microwave engineers, chemists, and technical personnel in universities, industry, and national laboratories will find the book invaluable.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 1654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Plasma Spectroscopy written by Takashi Fujimoto and published by Clarendon Press. This book was released on 2004-06-17 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the characteristics of optical radiation, or a spectrum, emitted by various plasmas. In plasma, the same atomic species can produce quite different spectra, or colours, depending on the nature of the plasma. This book gives a theoretical framework by which a particular spectrum can be interpreted correctly and coherently. The uniqueness of the book lies in its comprehensive treatment of the intensity distribution of spectral lines and the population density distribution among the atomic levels in plasmas. It is intended to provide beginners with a good perspective of the field, laying out the physics in an extremely clear manner and starting from an elementary level. A useful feature of the book is the asterisked sections and chapters which can be skipped by readers who only wish to gain a quick and basic introduction to plasma spectroscopy. It will also be useful to researchers working actively in the field, acting as a guide for carrying out experiments and interpreting experimental observations.
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IGEC Transactions Volume 1 Energy Conversion and Management written by Jian Zhao and published by Springer Nature. This book was released on with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Plasma Technology written by Paul K. Chu and published by CRC Press. This book was released on 2013-07-15 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of pioneering scientists from around the world, Low Temperature Plasma Technology: Methods and Applications brings together recent technological advances and research in the rapidly growing field of low temperature plasmas. The book provides a comprehensive overview of related phenomena such as plasma bullets, plasma penetration into biofilms, discharge-mode transition of atmospheric pressure plasmas, and self-organization of microdischarges. It describes relevant technology and diagnostics, including nanosecond pulsed discharge, cavity ringdown spectroscopy, and laser-induced fluorescence measurement, and explores the increasing research on atmospheric pressure nonequilibrium plasma jets. The authors also discuss how low temperature plasmas are used in the synthesis of nanomaterials, environmental applications, the treatment of biomaterials, and plasma medicine. This book provides a balanced and thorough treatment of the core principles, novel technology and diagnostics, and state-of-the-art applications of low temperature plasmas. It is accessible to scientists and graduate students in low-pressure plasma physics, nanotechnology, plasma medicine, and materials science. The book is also suitable as an advanced reference for senior undergraduate students.
Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2001 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cold Plasma in Food and Agriculture written by NN Misra and published by Academic Press. This book was released on 2016-07-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold Plasma in Food and Agriculture: Fundamentals and Applications is an essential reference offering a broad perspective on a new, exciting, and growing field for the food industry. Written for researchers, industry personnel, and students interested in nonthermal food technology, this reference will lay the groundwork of plasma physics, chemistry, and technology, and their biological applications. Food scientists and food engineers interested in understanding the theory and application of nonthermal plasma for food will find this book valuable because it provides a roadmap for future developments in this emerging field. This reference is also useful for biologists, chemists, and physicists who wish to understand the fundamentals of plasma physics, chemistry, and technology and their biological interactions through applying novel plasma sources to food and other sensitive biomaterials. - Examines the topic of cold plasma technology for food applications - Demonstrates state-of-the-art developments in plasma technology and potential solutions to improve food safety and quality - Presents a solid introduction for readers on the topics of plasma physics and chemistry that are required to understand biological applications for foods - Serves as a roadmap for future developments for food scientists, food engineers, and biologists, chemists, and physicists working in this emerging field
Download or read book Spectroscopy and Optical Diagnostics for Gases written by Ronald K. Hanson and published by Springer. This book was released on 2015-10-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the science that governs the interaction of light and matter (in the gas phase). It provides readers with the basic knowledge to exploit the light-matter interaction to develop quantitative tools for gas analysis (i.e. optical diagnostics) and understand and interpret the results of spectroscopic measurements. The authors pair the basics of gas‐phase spectroscopy with coverage of key optical diagnostic techniques utilized by practicing engineers and scientists to measure fundamental flow‐field properties. The text is organized to cover three sub‐topics of gas‐phase spectroscopy: (1) spectral line positions, (2) spectral line strengths, and (3) spectral lineshapes by way of absorption, emission, and scattering interactions. The latter part of the book describes optical measurement techniques and equipment. Key subspecialties include laser induced fluorescence, tunable laser absorption spectroscopy, and wavelength modulation spectroscopy. It is ideal for students and practitioners across a range of applied sciences including mechanical, aerospace, chemical, and materials engineering.
Download or read book Review of the U S Department of Energy s Heavy Vehicle Technologies Program written by National Research Council and published by National Academies Press. This book was released on 2000-12-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: As national priorities have been focused both on reducing fuel consumption and improving air quality, attention has increased on reducing emissions from many types of vehicles, including light-duty, medium-duty, and heavy-duty diesel-powered vehicles. Meeting the recently promulgated (and proposed) emission standards and simultaneously increasing fuel economy will pose especially difficult challenges for diesel-powered vehicles and will require the development of new emission-reduction technologies. In response to a request from the director of OHVT, the National Research Council formed the Committee on Review of DOE's Office of Heavy Vehicle Technologies to conduct a broad, independent review of its research and development (R&D) activities.
Download or read book Plasma Kinetics in Atmospheric Gases written by M. Capitelli and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasis is placed on the analysis of translational, rotational, vibrational and electronically excited state kinetics, coupled to the electron Boltzmann equation.
Download or read book Non Thermal Plasma Techniques for Pollution Control written by Bernie M. Penetrante and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acid rain, global warming, ozone depletion, and smog are preeminent environmental problems facing the world today. Non-thermal plasma techniques offer an innovative approach to the solution of some of these problems. There are many types of non-thermal plasma devices that have been developed for environmental applications. The potential of these devices for the destruction of pollutants or toxic molecules has already been demonstrated in many contexts, such as nitrogen oxides (NOX) and sulfur dioxide (SO2) in flue gases, heavy metals and volatile organic compounds (VOCs) in industrial effluents, and chemical agents such as nerve gases. This book contains a comprehensive account of the latest developments in non-thermal plasma devices and their applications to the disposal of a wide variety of gaseous pollutants.
Download or read book Plasma Chemistry and Gas Conversion written by Nikolay Britun and published by BoD – Books on Demand. This book was released on 2018-12-19 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-temperature non-equilibrium gaseous discharges represent nearly ideal media for boosting plasma-based chemical reactions. In these discharges the energy of plasma electrons, after being received from the electromagnetic field, is transferred to the other degrees of freedom differently, ideally with only a small part going to the translational motion of heavy gas particles. This unique property enables the important application of non-equilibrium plasmas for greenhouse gas conversion. While the degree of discharge non-equilibrium often defines the energetic efficiency of conversion, other factors are also of a great importance, such as type of discharge, presence of plasma catalysis, etc. This book is focused on the recent achievements in optimization and understanding of non-equilibrium plasma for gas conversion via plasma modeling and experimental work.
Download or read book Non Thermal Plasma Technology for Polymeric Materials written by Sabu Thomas and published by Elsevier. This book was released on 2018-10-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering
