Download or read book On the Simulation of Premixed Combustion Taking Into Account Variable Mixtures written by Martin Freitag and published by . This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Modeling and Simulation of Turbulent Mixing and Reaction written by Daniel Livescu and published by Springer Nature. This book was released on 2020-02-19 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent research advances in the area of turbulent flows from both industry and academia for applications in the area of Aerospace and Mechanical engineering. Contributions include modeling, simulations and experiments meant for researchers, professionals and students in the area.
Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
Download or read book Advanced Turbulent Combustion Modeling for Gas Turbine Application written by Andrea Donini and published by Andrea Donini. This book was released on with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the increasing presence of renewable energy sources, fossil fuels will remain the primary supply of the world's energy needs for the upcoming future. Modern gas-turbine based systems represent one of the most efficient large-scale power generation technology currently available. Alongside this, gas-turbine power plants operate with very low emissions, have flexible operational characteristics and are able to utilize a broad range of fuels. It is expected that gas-turbine based plants will play an important role as an effective means of converting combustion energy in the future as well, because of the vast potential energy savings. The numerical approach to the design of complex systems such as gas-turbines has gained a continuous growth of interest in the last few decades. This because simulations are foreseen to provide a tremendous increase in the combustor efficiency, fuel-flexibility and quality over the next future. In this dissertation, an advanced turbulent combustion technique is implemented and progressively developed for the simulation of all the features that are typically observed in stationary gas-turbine combustion, including hydrogen as a fuel. The developed turbulent combustion model retains most of the accuracy of a detailed simulation while drastically reducing its computational time. As a result of this work, the advancement of power generation plants can be accelerated, paving the way for future developments of alternative fuel usage in a cleaner and more efficient combustion.
Download or read book Development of a Partially Premixed Combustion Model for a Diesel Engine Using Multiple Injection Strategies written by Rene Thygesen and published by Logos Verlag Berlin GmbH. This book was released on 2012 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to fulfil future emissions legislations, new combustion systems are to be investigated. One way of improving exhaust emissions is the application of multiple injection strategies and conventional or partially premixed combustion conditions to a Diesel engine. The application of numerical techniques as CFD supports and improves the quality of engine developments. Unfortunately, current spray and combustion models are not accurate enough to simulate multiple injection systems, being in this way a topic of research. The goal of this study was the development of a novel simulation method for the investigation of Diesel engines operated with multiple injection strategies and different combustion modes. The first part of this work focused in improving the spray modelling. The inform ation of 3D CFD simulations of the injector nozzle was introduced in the spray simulation as boundary conditions developing coupling subroutines for this issue. The atomisation modelling was also improved using validated presumed droplet size distributions. Moreover, to avoid the simulation of the injector nozzle for every investigated operating point, a novel interpolating tool was developed in order to create spray boundary conditions based on few 3D CFD simulations of the nozzle under certain initial and boundary conditions. The second part of this thesis dealt with the combustion modelling of Diesel engines. For this issue, a laminar flamelet approach called Representative Interactive Flamelet model (RIF) was selected and implemented. Afterwards, an extended combustion model based on RIF was developed in order to take into account multiple injection strategies. Finally, this new model was validated with a wide range of operating points: applying multiple injection strategies under conventional and partially premixed combustion conditions.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Simulation of Turbulent Flows with and without Combustion with Emphasis on the Impact of Coherent Structures on the Turbulent Mixing written by Cunha Galeazzo, Flavio Cesar and published by KIT Scientific Publishing. This book was released on 2016-10-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of turbulent mixing in complex turbulent flows is a challenging task. The effective mixing of entrained fluids to a molecular level is a vital part of the dynamics of turbulent flows, especially when combustion is involved. The work has shown the limitations of the steady-state simulations and acknowledged the need of applying high-fidelity unsteady methods for the calculation of flows with pronounced unsteadiness promoted by large-scale coherent structures or other sources.
Download or read book Hydrogen for Clean Energy Production Combustion Fundamentals and Applications written by Medhat A. Nemitallah and published by Springer Nature. This book was released on with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Invariant Manifolds for Physical and Chemical Kinetics written by Alexander N. Gorban and published by Springer Science & Business Media. This book was released on 2005-02-01 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: By bringing together various ideas and methods for extracting the slow manifolds, the authors show that it is possible to establish a more macroscopic description in nonequilibrium systems. The book treats slowness as stability. A unifying geometrical viewpoint of the thermodynamics of slow and fast motion enables the development of reduction techniques, both analytical and numerical. Examples considered in the book range from the Boltzmann kinetic equation and hydrodynamics to the Fokker-Planck equations of polymer dynamics and models of chemical kinetics describing oxidation reactions. Special chapters are devoted to model reduction in classical statistical dynamics, natural selection, and exact solutions for slow hydrodynamic manifolds. The book will be a major reference source for both theoretical and applied model reduction. Intended primarily as a postgraduate-level text in nonequilibrium kinetics and model reduction, it will also be valuable to PhD students and researchers in applied mathematics, physics and various fields of engineering.
Download or read book Complex Effects in Large Eddy Simulations written by Stavros Kassinos and published by Springer Science & Business Media. This book was released on 2007-07-16 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Large Eddy Simulations is reaching a level of maturity that brings this approach to the mainstream of engineering computations, while it opens opportunities and challenges. The main objective of this volume is to bring together leading experts in presenting the state-of-the-art and emerging approaches for treating complex effects in LES. A common theme throughout is the role of LES in the context of multiscale modeling and simulation.
Download or read book Issues in Energy Conversion Transmission and Systems 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Energy Conversion, Transmission, and Systems: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Energy Conversion, Transmission, and Systems. The editors have built Issues in Energy Conversion, Transmission, and Systems: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Energy Conversion, Transmission, and Systems in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Energy Conversion, Transmission, and Systems: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Turbulent Mixing and Combustion written by Andrew Pollard and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goals of the Symposium were to draw together researchers in turbulence and combustion so as to highlight advances and challenge the boundaries to our understanding of turbulent mixing and combus tion from both experimental and simulation perspectives; to facilitate cross-fertilization between leaders in these two fields. These goals were noted to be important given that turbulence itself is viewed as the last great problem in classical physics and the addition of chemical reaction amplifies the difficulties enormously. The papers that have been included here reflect the richness of our subject. Turbulence is rich and complex in its own right. And, its inner structure, hidden in the morass of scales, large and small, can dominate transport. Earlier IUTAM Symposia have considered this field, Eddy Structure Identification in Free Turbulent Flows, Bonnet and Glauser (eds) 1992 and Simulation and Identification of Organized Structures in Flows, Sorensen, Hopfinger and Aubry (eds) 1997. The combustion community is well served by its specialized events, most notable is the bi annual International Combustion Symposium, held under the auspices of the Combustion Institute. Mixing is often considered somewhere in between these two. This broad landscape was addressed in this Sym posium in a somewhat temporal linear fashion of increasing complexity. The lectures considered the many challenges posed by adding one ele ment to the base formed by others: turbulence and turbulent mixing in the absence of combustion through to turbulent mixing dominated by chemistry and combustion.
Download or read book Catalysis for Renewables written by Gabriele Centi and published by John Wiley & Sons. This book was released on 2008-01-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its focus on catalysis and addressing two very hot and timely topics with significant implications for our future lives, this will be a white book in the field. The authority behind this practical work is the IDECAT Network of Excellence, and the authors here outline how the use of catalysis will promote the more extensive use of renewable feedstocks in chemical and energy production. They present the latest applications, their applicability and results, making this a ready reference for researchers and engineers working in catalysis, chemistry, and industrial processes wishing to analyze options, outlooks and opportunities in the field.
