Download or read book On the Problem of Obtaining High Temperatures at High Pressures written by A. F. Vereshchagin and published by . This book was released on 1955 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature and High Pressure Crystal Chemistry written by Robert M. Hazen and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 41 of Reviews in Mineralogy and Geochemistry introduces to the field of high-temperature and high-pressure crystal chemistry, both as a guide to the dramatically improved techniques and as a summary of the voluminous crystal chemical literature on minerals at high temperature and pressure. The three parts of the book introduces crystal chemical considerations of special relevance to non-ambient crystallographic studies, reviews the temperature- and pressure-variation of structures in major mineral groups and presents experimental techniques for high-temperature and high-pressure studies of single crystals and polycrystalline samples as well as special considerations relating to diffractometry on samples at non-ambient conditions.
Download or read book High Temperatures High Pressures written by and published by . This book was released on 1969 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international refereed journal devoted to the experimental and theoretical study of the thermophysical properties of matter.
Download or read book WADC Technical Report written by United States. Wright Air Development Division and published by . This book was released on 1961 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Log written by and published by . This book was released on 1938 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A High Pressure Cell Capable of Temperatures to 1700 C and Pressures to 20 000 Atmospheres written by L. B. Robinson and published by . This book was released on 1961 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Techniques for High Pressure and High Temperature written by G. C. Ulmer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the last two decades, the experimental technology for the study of high temperature solid-vapor and liquid-vapor equilibria has mushroomed so fast that· both academic and industrial research ers desirous of working in this field -- be they physical chemists, metallurgists, ceramists, petrologists, crystal chemists, or mem bers of any of the several branches of materials science -- find themselves in the situation that in order to learn the art of the latest techniques, a period of apprenticeship or residency needs be spent at an institution or laboratory currently engaged in this type of solid-vapor or liquid-vapor research. The tech niques for control of the vapor phase at total pressures of one atmosphere or greater have not been well defined in the literature. Therefore, the purpose of this volume will be to serve as a labora tory manual for the control, calibration, and measurement of high temperature-high pressure equilibria. The avowed aims of this treatment of experimental techniques are: (1) to give, in terms understandable at the graduate student level, the laboratory procedures necessary to the design and utilization of good experimental technique, (2) to list the limitations, dangers, and technical pitfalls inherent or intrinsic to the described techniques, (3) to give theory and specific data only where they are essential to the experimental design, (4) to give with each chapter references that are extensive enough to serve as a bibliography of the state-of-the-art of technique development within the last decade.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1988 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Railway Locomotives and Cars written by and published by . This book was released on 1927 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The genuine works of Flavius Josephus Containing four books of the Jewish war written by Flavius Josephus and published by . This book was released on 1921 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tubular String Characterization in High Temperature High Pressure Oil and Gas Wells written by Jiuping Xu and published by CRC Press. This book was released on 2018-10-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature, high oil pressure, oil and gas well completion testing have always been a technical challenge and basic theoretical research is one of the key factors needed to ensure a successful completion test. The completion test basic theory includes: a stress analysis of the completion string, completion string buckling behavior, and temperature and pressure distribution prediction. The completion string is the main bearing and power transmission component for oil and gas well operations and production, and it is required to take on a combination of loads, which result in completion string deformation. Because of these complex relationships, completion string stress analysis has become increasingly more complicated. This book discusses the characters of tubular strings in HTHP (High Temperature - High Pressure) oil and gas wells. These characters include the mechanical behavior of tubular strings and the temperature and pressure variation of tubular strings in different conditions. Mathematical models are established for different conditions and solution existence and uniqueness of some models is discussed, providing algorithms corresponding to the different models. Numerical experiments are presented to verify the validity of models and the feasibility of algorithms, and the impact of the parameters of models for oil and gas wells is also discussed. This book is written for production and testing engineers to provide them with the tools to deal more effectively with the numerical decisions they have to take and for researchers and technicians in petroleum and gas testing and production engineering. Finally, it is also intended to serve as a reference book for mathematicians, college teachers and students.
Download or read book Air Force Research Resum s written by and published by . This book was released on with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of High Pressure written by Murli H. Manghnani and published by Universities Press. This book was released on 2000 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: These books presents a wide spectrum of research and development activities in the field of High Pressure Science and Technology. These book provide comprehensive and interdisciplinary descriptions of recent research accomplishments in the biological, chemical, Earth, materrals, physical, physiological and related sciences.
Download or read book Technical News Bulletin of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1955 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Superconductivity X written by Kozo Osamura and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Superconductivity, which has been held annu ally since 1988, is a forum for presenting the most up-to-date information about a broad range of research and development in superconductivity, from funda mental aspects to applications. More than 10 years have passed since the discovery of oxide superconductors and since various developments of applications began. It may be said that the prospects for application of oxide superconductors recently have opened up. Great progress has been made toward practical use, for example, of the flywheel, which uses bulk materials, and the high-performance cryo-cooled magnet made of bismuth wire. These were the results of persistent efforts to develop materials from the viewpoint of materials science and engineering. Also important is the progress in comprehensive understanding of high temperature superconductivity. Unique electronic properties of cuprates such as the non-Fermi liquid normal state, spin-charge separation, spin gap, and d-wave symmetry were discussed at the symposium, as were the unique electromagnetic properties resulting from the low dimensionality of cuprates. In the field of new superconductors, many exotic materials have been discovered since 1986. A decade of work with cuprate superconductors is reviewed in this proceedings, and several of the newest materials are presented. These papers will be instructive for many researchers and for students who are to enter this field.
Download or read book Developments in Injection Moulding 3 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of polymer technology, injection moulding is the most important moulding process. Because of the size of that industry and the rate of development which it attracts, it is impossible to present, in a single reasonably sized volume, all of the developments that have taken place in recent years. The purpose of this book is therefore to present selected topics which contribute to, or exemplify, develop ments in this important area. Each year considerable development takes place in the area of machine and process control and these developments receive con siderable publicity in the trade press. Another area which advances at the same pace, but which seems to receive far less publicity, although it is equally important, is the area of mould design and manufacture. It is important because profitability is dependent upon the design, manufacture and operation of the mould. It is for this reason that several chapters relating to mould design have been included in this, the third volume in this series. The topics covered include advances in mould manufacture, the use of runnerless systems to aid productivity, and others showing how the applications of computers can greatly assist the moulder to obtain a more productive unit.
