Download or read book On the Face Stability of Shallow Tunnels in Sand written by Ansgar Kirsch and published by Logos Verlag Berlin GmbH. This book was released on 2009 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small scale model tests at single gravity. The evolution of the failure mechanism and the development of the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially loose sand did not show any development of a discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Only those by Vermeer/Ruse and Leca/Dormieux were able to predict the necessary support pressure on a 95 % confidence level. A three-dimensional finite element investigation of face stability served to assess the ability of two constitutive models, an elastoplastic Mohr-Coulomb and a hypoplastic model, to predict the necessary support pressure and the displacements at the tunnel face. The simulation of the small scale experiments revealed that the observed necessary support pressure and incremental displacements were predicted sufficiently well with both constitutive models.

Download or read book Limit Analysis and Soil Plasticity written by Wai-Fah Chen and published by Elsevier. This book was released on 2013-07-10 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geotechnical Engineering, Volume 7: Limit Analysis and Soil Plasticity covers the theory and applications of limit analysis as applied to soil mechanics. Organized into 12 chapters, the book presents an introduction to the modern development of theory of soil plasticity and includes rock-like material. The first four chapters of the book describe the technique of limit analysis, beginning with the historical review of the subject and the assumptions on which it is based, and then covering various aspects of available techniques of limit analysis. The subsequent chapters deal with the applications of limit analysis to what may be termed "classical soil mechanics problems that include bearing capacity of footings, lateral earth pressure problems, and stability of slopes. In many cases, comparisons of limit analysis solution and conventional limit equilibrium and slip-like solutions are also presented. Other chapters deal with the advances in bearing-capacity problem of concrete blocks or rock and present theoretical and experimental results of various concrete bearing problems. The concluding chapter examines elastic-plastic soil and elastic-plastic-fracture models for concrete materials. This book is an ideal resource text to geotechnical engineers and soil mechanics researchers.

Download or read book Mechanized Tunnelling in Urban Areas written by Vittorio Guglielmetti and published by CRC Press. This book was released on 2008-01-07 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internationally, the mechanized excavation of tunnels has intensified in the last two decades, as the number of tunnels being constructed for subways and railway underpasses increases. The subject of mechanized tunnelling in urban areas has not previously received the attention that it deserves, despite there being specific hazards associated with the construction of tunnels in metropolitan areas, including poor ground conditions, water tables higher than the level of tunnels, and subsidence leading to damage to the existing structures on the surface. The application of technologies for achieving the stability of the tunnel and for minimizing surface settlement is described in this book. Accurate characterization of the ground; rigorous assessment and management of risk from design to maintenance; the correct choice of a tunnel boring machine and a plan for the advancement of the tunnel; specific excavation procedures and real-time monitoring of excavation parameters are all discussed in this thorough work.

Download or read book Introduction to Tunnel Construction written by David Chapman and published by CRC Press. This book was released on 2017-11-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.

Download or read book Design and Construction of Tunnels written by Pietro Lunardi and published by Springer Science & Business Media. This book was released on 2008-02-20 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work illustrates how the Analysis of Controlled Deformation in Rocks and Soils (ADECO-RS) is used in the design and the construction of tunnels. This is a very new and effective way of tunnel construction. The ADECO-RS approach makes a clear distinction between the design and the construction stages and allows reliable forecasts of construction times and costs to be made. It uses the advance core (the core of ground ahead of the face) as a structural tool for the long and short term stabilisation of tunnels, after its rigidity has first been regulated using conservation techniques.

Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.

Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Giulia Viggiani and published by CRC Press. This book was released on 2012-09-05 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical Aspects of Underground Construction in Soft Ground comprises a collection of 118 papers, four reports on symposium themes, and four invited lectures presented at the seventh International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Rome, Italy, 16-18 May 2011.The symposium was organized by the

Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Klaas Jan Bakker and published by CRC Press. This book was released on 2013-05-23 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable source of reference on the current practices of analysis, design and construction of tunnels and underground structures in soft ground. This collection of reviewed papers covers a wide range of tunnelling practice, from deep excavations in Singapore to the construction of a new metro line in Barcelona. The international scope of the contributors makes this a truly comprehensive collection of work on the geotechnical aspects of soft ground excavation.

Download or read book Mechanised Shield Tunnelling written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanised shield tunnelling has developed considerably since the publication of the first edition of this book. Challenging tunnel projects under difficult conditions demand innovative solutions, which has led to constant further development and innovation in process technology, constructions operations and the machines and materials used. The book collects the latest state of technology in mechanised shield tunnelling. It describes the basics of mechanised tunnelling technology and the various types of machines and gives calculation methods and constructural advice. Further chapters cover excavation tools, muck handling, tunnel support, surveying and steering as well as workplace safety. There is also detailled information about contractual aspects and process controlling.

Download or read book Tunnel Engineering written by Michael Sakellariou and published by BoD – Books on Demand. This book was released on 2020-03-18 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of chapters covering a wide range of tunneling engineering topics. The scope was to present reviews of established methods and new approaches in construction practice and in digital technology tools like building information modeling. The book is divided in four sections dealing with geological aspects of tunneling, analysis and design, new challenges in tunnel construction, and tunneling in the digital era. Topics from site investigation and rock mass failure mechanisms, analysis and design approaches, and innovations in tunnel construction through digital tools are covered in 10 chapters. The references provided will be useful for further reading.

Download or read book Deformation and Progressive Failure in Geomechanics written by A. Asaoka and published by Elsevier. This book was released on 1997-10-23 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progressive failure has been a classical problem in the field of geotechnical engineering and has attracted considerable attention in connection with slope stability and foundation problems. It is associated with strain localization or shear banding and is also related to damage in material structures. As knowledge of the progressive failure mechanism increases, it is now necessary to establish effective communications between researchers and engineers. The International Symposium on Deformation and Progressive Failure in Geomechanics provided an opportunity for discussing recent advances in this area. A total of 136 papers were contributed from 22 countries. As well as these, the symposium proceedings also contain 8 interim technical reports on the subject by the members of the Asian Technical Committee of the International Society for Soil Mechanics and Foundation Engineering and the Japanese Geotechnical Society National Committee on Progressive Failure in Geo-structures.

Download or read book Centrifugal Model Testing of Shallow Tunnels in Sand written by Alberto De Donati and published by . This book was released on 1982 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Geotechnical Aspects of Underground Construction in Soft Ground 2nd Edition written by Mohammed Elshafie and published by CRC Press. This book was released on 2022-12-26 with total page 2036 pages. Available in PDF, EPUB and Kindle. Book excerpt: GEOTECHNICAL ASPECTS OF UNDERGROUND CONSTRUCTION IN SOFT GROUND comprises a collection of 112 contributions presented at the Tenth International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, held in Cambridge, United Kingdom, 27-29th June 2022. This 2nd edition also includes four general reports on the symposium themes which give an overview of the papers submitted to the symposium, covered in four technical sessions. The symposium is the latest in a series which began in New Delhi in 1994, and was followed by symposia in London (1996), Tokyo (1999), Toulouse (2002), Amsterdam (2005), Shanghai (2008), Rome (2011), Seoul (2014) and Sao Paulo (2017). This symposium was organised by the Geotechnical Research Group at the University of Cambridge, under the auspices of the Technical Committee TC204 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). Geotechnical Aspects of Underground Construction in Soft Ground includes contributions from more than 25 countries on the research, design and construction of underground works in soft ground. The contributions cover the following themes: Field case studies Sensing technologies and monitoring for underground construction in soft ground Physical and numerical modelling of tunnels and deep excavations in soft ground Seismic response of underground infrastructure in soft ground Design and application of ground improvement for underground construction Ground movements, interaction with existing structures and mitigation measures Similar to previous editions, GEOTECHNICAL ASPECTS OF UNDERGROUND CONSTRUCTION IN SOFT GROUND represents a valuable source of reference on the current practice of analysis, design, and construction of tunnels and deep excavations in soft ground. The book is particularly aimed at academics and professionals interested in geotechnical and underground engineering.

Download or read book Blindsight written by Peter Watts and published by Macmillan. This book was released on 2006-10-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hugo and Shirley Jackson award-winning Peter Watts stands on the cutting edge of hard SF with his acclaimed novel, Blindsight Two months since the stars fell... Two months of silence, while a world held its breath. Now some half-derelict space probe, sparking fitfully past Neptune's orbit, hears a whisper from the edge of the solar system: a faint signal sweeping the cosmos like a lighthouse beam. Whatever's out there isn't talking to us. It's talking to some distant star, perhaps. Or perhaps to something closer, something en route. So who do you send to force introductions with unknown and unknowable alien intellect that doesn't wish to be met? You send a linguist with multiple personalities, her brain surgically partitioned into separate, sentient processing cores. You send a biologist so radically interfaced with machinery that he sees x-rays and tastes ultrasound. You send a pacifist warrior in the faint hope she won't be needed. You send a monster to command them all, an extinct hominid predator once called vampire, recalled from the grave with the voodoo of recombinant genetics and the blood of sociopaths. And you send a synthesist—an informational topologist with half his mind gone—as an interface between here and there. Pray they can be trusted with the fate of a world. They may be more alien than the thing they've been sent to find. At the Publisher's request, this title is being sold without Digital Rights Management Software (DRM) applied.

Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.

Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 2054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.