Download or read book On the Analysis of Plates and Shells by the Perturbation Technique written by R. B. Matthiesen and published by . This book was released on 1963 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Plates and Shells written by Eduard Ventsel and published by CRC Press. This book was released on 2001-08-24 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting recent principles of thin plate and shell theories, this book emphasizes novel analytical and numerical methods for solving linear and nonlinear plate and shell dilemmas, new theories for the design and analysis of thin plate-shell structures, and real-world numerical solutions, mechanics, and plate and shell models for engineering applications. It includes computer processes for finite difference, finite element, boundary element, and boundary collocation methods as well as other variational and numerical methods. It also contains end-of-chapter examples and problem/solution sets, a catalog of solutions for cylindrical and spherical shells, and tables of the most commonly used plates and shells.
Download or read book A Two Step Perturbation Method in Nonlinear Analysis of Beams Plates and Shells written by Hui-Shen Shen and published by John Wiley & Sons. This book was released on 2013-07-03 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability to predict the nonlinear response of beams, plates and shells when subjected to thermal and mechanical loads is of prime interest to structural analysis. In fact, many structures are subjected to high load levels that may result in nonlinear load-deflection relationships due to large deformations. One of the important problems deserving special attention is the study of their nonlinear response to large deflection, postbuckling and nonlinear vibration. A two-step perturbation method is firstly proposed by Shen and Zhang (1988) for postbuckling analysis of isotropic plates. This approach gives parametrical analytical expressions of the variables in the postbuckling range and has been generalized to other plate postbuckling situations. This approach is then successfully used in solving many nonlinear bending, postbuckling, and nonlinear vibration problems of composite laminated plates and shells, in particular for some difficult tasks, for example, shear deformable plates with four free edges resting on elastic foundations, contact postbuckling of laminated plates and shells, nonlinear vibration of anisotropic cylindrical shells. This approach may be found its more extensive applications in nonlinear analysis of nano-scale structures. Concentrates on three types of nonlinear analyses: vibration, bending and postbuckling Presents not only the theoretical aspect of the techniques, but also engineering applications of the method A Two-Step Perturbation Method in Nonlinear Analysis of Beams, Plates and Shells is an original and unique technique devoted entirely to solve geometrically nonlinear problems of beams, plates and shells. It is ideal for academics, researchers and postgraduates in mechanical engineering, civil engineering and aeronautical engineering.
Download or read book Plate and Shell Structures written by Maria Radwańska and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and Shell Structures: Selected Analytical and Finite Element Solutions Maria Radwañska, Anna Stankiewicz, Adam Wosatko, Jerzy Pamin Cracow University of Technology, Poland Comprehensively covers the fundamental theory and analytical and numerical solutions for different types of plate and shell structures Plate and Shell Structures: Selected Analytical and Finite Element Solutions not only provides the theoretical formulation of fundamental problems of mechanics of plates and shells, but also several examples of analytical and numerical solutions for different types of shell structures. The book contains advanced aspects related to stability analysis and a brief description of modern finite element formulations for plates and shells, including the discussion of mixed/hybrid models and locking phenomena. Key features: 52 example problems solved and illustrated by more than 200 figures, including 30 plots of finite element simulation results. Contents based on many years of research and teaching the mechanics of plates and shells to students of civil engineering and professional engineers. Provides the basis of an intermediate-level course on computational mechanics of shell structures. The book is essential reading for engineering students, university teachers, practitioners and researchers interested in the mechanics of plates and shells, as well as developers testing new simulation software.
Download or read book Theories of Plates and Shells written by Reinhold Kienzler and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and shell theories experienced a renaissance in recent years. The potentials of smart materials, the challenges of adaptive structures, the demands of thin-film technologies and more on the one hand and the availability of newly developed mathematical tools, the tremendous increase in computer facilities and the improvement of commercial software packages on the other caused a reanimation of the scientific interest. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected. The aim was to discuss the common roots of different plate and shell approaches, to review the current state of the art, and to develop future lines of research. Contributions were written by scientists with civil and mechanical engineering as well as mathematical and physical background.
Download or read book Perturbation Analysis of Some Axisymmetric Problems in Plates and Shells written by James Raymond Stafford and published by . This book was released on 1967 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory of Plates and Shells written by Christian Mittelstedt and published by Springer Nature. This book was released on 2023-06-18 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of plates and shells and is divided into four sections. After briefly introducing the basics of elasticity theory and the energy methods of elastostatics in the first section, the second section is devoted to the statics of disk structures. In addition to isotropic disks in Cartesian and polar coordinates, approximation methods and anisotropic disks are also discussed. The following third section deals with plate structures, covering plates in Cartesian and polar coordinates, and also discussing approximation methods and higher-order plate theories. Other chapters in this section discuss plate buckling as well as geometric nonlinear analysis and laminated plates. The fourth and final section of this book is devoted to shells, i.e., curved thin structures, following the common division into membrane theory on the one hand and bending theory on the other hand. This book is intended for students at universities, but also for engineers in practice and researchers in engineering science.
Download or read book Analysis of Shells and Plates written by Phillip L. Gould and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study ofthree-dimensional continua has been a traditional part of graduate education in solid mechanics for some time. With rational simplifications to the three-dimensional theory of elasticity, the engineering theories of medium-thin plates and of thin shells may be derived and applied to a large class of engi neering structures distinguished by a characteristically small dimension in one direction. Often, these theories are developed somewhat independently due to their distinctive geometrical and load-resistance characteristics. On the other hand, the two systems share a common basis and might be unified under the classification of Surface Structures after the German term Fliichentragwerke. This common basis is fully exploited in this book. A substantial portion of many traditional approaches to this subject has been devoted to constructing classical and approximate solutions to the governing equations of the system in order to proceed with applications. Within the context of analytical, as opposed to numerical, approaches, the limited general ity of many such solutions has been a formidable obstacle to applications involving complex geometry, material properties, and/or loading. It is now relatively routine to obtain computer-based solutions to quite complicated situations. However, the choice of the proper problem to solve through the selection of the mathematical model remains a human rather than a machine task and requires a basis in the theory of the subject.
Download or read book Finite Element Methods for Plate and Shell Structures Formulations and algorithms written by Thomas J. R. Hughes and published by . This book was released on 1986 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plates and Shells written by Michel Fortin and published by American Mathematical Soc.. This book was released on 1999-06-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features the proceedings from the Summer Seminar of the Canadian Mathematical Society held at Universite Laval. The purpose of the seminar was to gather both mathematicians and engineers interested in the theory or application of plates and shells, or more generally, in the modelisation of thin structures. From this, it was hoped that a better understanding of the problem would emerge for both groups of professionals. New aspects from the mathematical point of view and new applications posing new challenges are reported. This volume offers a snapshot of the state of the art of this rapidly evolving topic.
Download or read book Shell Theory written by F.I. Niordson and published by Elsevier. This book was released on 2012-12-02 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This account of the theory of plates and shells is written primarily as a textbook for graduate students in mechanical and civil engineering.The unified treatment of shells of arbitrary shape is accomplished by tensor analysis. This useful tool is introduced in the first chapter, and no knowledge of advanced mathematical methods is required. The general theory developed in the first eight chapters is applied in the remaining part to thin elastic plates and shells with special emphasis on engineering methods and engineering applications. A number of detailed examples illustrate the theory.
Download or read book A Theory of Latticed Plates and Shells written by G. I. Pshenichnov and published by World Scientific. This book was released on 1993 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the theory of latticed shells as continual systems and describes its applications. It analyses the problems of statics, stability and dynamics. Generally, a classical rod deformation theory is applied. However, in some instances, more precise theories which particularly consider geometrical and physical nonlinearity are employed. A new effective method for solving general boundary value problems and its application for numerical and analytical solutions of mathematical physics and reticulated shell theory problems is described. A new method of solving the shell theory's nonlinear problems, substantially simplifying the existing algorithms is given. Questions of optimum design are discussed. Some of the findings are generalized and extended to edged and composite systems. The results of the solutions of a wide range of pressing problems are presented.
Download or read book Plates Laminates and Shells written by T. Lewi?ski and published by World Scientific. This book was released on 2000 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a systematic and comprehensive presentation of the results concerning effective behavior of elastic and plastic plates with periodic or quasiperiodic structure. One of the chapters covers the hitherto available results concerning the averaging problems in the linear and nonlinear shell models.A unified approach to the problems studied is based on modern variational and asymptotic methods, including the methods of variational inequalities as well as homogenization techniques. Duality arguments are also exploited. A significant part of the book deals with problems important for engineering practice, such as: statical analysis of highly nonhomogeneous plates and shells for which common discretization techniques fail to be efficient, assessing stiffness reduction of cracked 0n/900m]s laminates, and assessing ultimate loads for perfectly plastic plates and shells composed of repeated segments. When possible, the homogenization formulas are cast in closed form expressions. The formulas presented in this manner are then used in constructing regularized formulations of the fundamental optimization problems for plates and shells, since the regularization concepts are based on introducing the composite regions for which microstructural properties play the role of new design variables.
Download or read book Stresses in Plates and Shells written by A. C. Ugural and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1999 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text provides comprehensive coverage of both plates and shells, and a unique blend of modern analytical and computer-oriented numerical methods in presenting stress analysis in a realistic setting. It is distinguished by its broad range of exceptional visual interpretations of the solutions, applications, and means by which loads are resisted in beams, plates, and shells. Combining the current-numerical, mechanics of materials, and theory of elasticity methods of analysis, Stresses in Plates and Shells, Second Edition, offers an in-depth and complete coverage of the subject for students and practicing engineers.
Download or read book Theory and Design of Plate Shell Structures written by Maan H. Jawad and published by Springer. This book was released on 1994 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to integrate the theory, design, and stability analysis of plates and shells in one comprehensive volume. With authoritative accounts of diverse aspects of plates and shells, this volume facilitates the study and design of structures that incorporate both plate and shell components.
Download or read book Theory and Analysis of Elastic Plates and Shells written by J. N. Reddy and published by CRC Press. This book was released on 2006-11-20 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because plates and shells are common structural elements in aerospace, automotive, and civil engineering structures, engineers must understand the behavior of such structures through the study of theory and analysis. Compiling this information into a single volume, Theory and Analysis of Elastic Plates and Shells, Second Edition presents a complete
Download or read book Plates and Shells written by Ansel C. Ugural and published by CRC Press. This book was released on 2017-10-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noted for its practical, accessible approach to senior and graduate-level engineering mechanics, Plates and Shells: Theory and Analysis is a long-time bestselling text on the subjects of elasticity and stress analysis. Many new examples and applications are included to review and support key foundational concepts. Advanced methods are discussed and analyzed, accompanied by illustrations. Problems are carefully arranged from the basic to the more challenging level. Computer/numerical approaches (Finite Difference, Finite Element, MATLAB) are introduced, and MATLAB code for selected illustrative problems and a case study is included.
