Download or read book On Standardized Model Integration written by Robert Hällqvist and published by Linköping University Electronic Press. This book was released on 2019-12-20 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing modern aircraft is not an easy task. Today, it is not enough to optimize aircraft sub-systems at a sub-system level. Instead, a holistic approach is taken whereby the constituent sub-systems need to be designed for the best joint performance. The State-of-the-Art (SotA) in simulating and exchanging simulation models is moving forward at a fast pace. As such, the feasible use of simulation models has increased and additional benefits can be exploited, such as analysing coupled sub-systems in simulators. Furthermore, if aircraft sub-system simulation models are to be utilized to their fullest extent, opensource tooling and the use of open standards, interoperability between domain specific modeling tools, alongside robust and automated processes for model Verification and Validation (V&V) are required. The financial and safety related risks associated with aircraft development and operation require well founded design and operational decisions. If those decisions are to be founded upon information provided by models and simulators, then the credibility of that information needs to be assessed and communicated. Today, the large number of sensors available in modern aircraft enable model validation and credibility assessment on a different scale than what has been possible up to this point. This thesis aims to identify and address challenges to allow for automated, independent, and objective methods of integrating sub-system models into simulators while assessing and conveying the constituent models aggregated credibility. The results of the work include a proposed method for presenting the individual models’ aggregated credibility in a simulator. As the communicated credibility of simulators here relies on the credibility of each included model, the assembly procedure itself cannot introduce unknown discrepancies with respect to the System of Interest (SoI). Available methods for the accurate simulation of coupled models are therefore exploited and tailored to the applications of aircraft development under consideration. Finally, a framework for automated model validation is outlined, supporting on-line simulator credibility assessment according to the presented proposed method.

Download or read book Digital Twins in Industrial Production and Smart Manufacturing written by Rajesh Kumar Dhanaraj and published by John Wiley & Sons. This book was released on 2024-10-22 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference exploring the benefits and implementation of digital twins in industrial production and manufacturing Digital Twins in Industrial Production and Smart Manufacturing provides an overview of digital twin theoretical concepts, techniques, and recent trends used to meet the requirements and challenges of industrial production and smart manufacturing. The text describes how to achieve industrial excellence through virtual factory simulation and digital modeling innovations for next-generation manufacturing system design. The contributing authors address the many possible technical advantages of major Industry 5.0 technological advancements, using illustrations to aid readers in practical implementation of concepts, along with existing scenarios, potential research gaps, adoption difficulties, case studies, and future research objectives. The text also presents many applications and use cases of Industry 5.0 and digital twins in a variety of industries, including the aerospace industry, pharmaceutical manufacturing and biotech, augmented reality, virtual reality, edge computing and blockchain-based Internet of Things (IoT), cobots, intelligent logistics and supply chain management, and more. Edited by a group of highly qualified academics with significant experience in the field, Digital Twins in Industrial Production and Smart Manufacturing covers additional topics such as: Hyper-automation technology, including specialized workflow procedures and particular sectors of solicitations linked to hyper-automation Digital twins in the context of smart cities, with attempts to draw comparisons with the use of digital twins in industrial IoT Virtual factories based on digital twins and corresponding architecture to facilitate modeling, simulation, and assessment of manufacturing systems Cognitive, interactive, and standardization aspects of digital twins, and the proper implementation of digital twin technology for safety critical systems Digital Twins in Industrial Production and Smart Manufacturing is a must-have reference for researchers, scholars, and professionals in fields related to digital twins in industrial production and manufacturing. It is also suitable as a hands-on resource for students interested in the fields of digital twins and smart manufacturing.

Download or read book Advances in Italian Mechanism Science written by Giuseppe Carbone and published by Springer. This book was released on 2018-10-29 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Proceedings of the Second International Conference of IFToMM ITALY, held in Cassino, Italy, in 2018. The main topics of the workshop include: Computational Kinematics, Dynamics of Machinery, Gearing and Transmissions, Multibody Dynamics, Mechatronics, Mechanism Design, Tribology, Vibration, Industrial and non-Industrial Applications.

Download or read book Modelling and Graphics in Science and Technology written by Jose Teixeira and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphics and Modelling are key technologies to support visualisation and product development tasks. Based on the recent developments in the areas of (scientific) visualisation, interaction techniques, distributed systems, and product design, in dustrial and applied research have improved the possibilities for further approaches and issues and for exchanging experiences. A workshop on Graphics and Model ling in Science & Technology was held in Coimbra, Portugal in June 1994, and the programme committee selected 19 papers for presentation. The workshop had a good international participation. Due to the extensive scientific contacts between Portuguese and German researchers, the workshop included the third Luso-German Computer Graphics Meeting. This book reflects the results of the workshop. The papers were updated after the workshop presentations to reflect the discussions during the meeting. Correspond ing to the different topics addresses in the workshop, the book is divided into the following six sections. CAD Models and Architectures Short overviews of the Reference Architecture for CAD and the Integration Con cept for CAD applications are given in this section. The integration ability of the international standard STEP is analysed, as well as STEP's integration approaches for product data sharing and product data exchange.

Download or read book A U S Carbon Cycle Science Plan written by Carbon and Climate Working Group (U.S.) and published by . This book was released on 1999 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fiscal Year 2001 Climate Change Budget Authorization Request written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 2001 with total page 1630 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Enterprise Interoperability II written by Ricardo Jardim-Gonçalves and published by Springer Science & Business Media. This book was released on 2007-08-29 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a concise reference to the state-of-the-art in software interoperability. Composed of over 90 papers, Enterprise Interoperability II ranges from academic research through case studies to industrial and administrative experience of interoperability. The international nature of the authorship continues to broaden. Many of the papers have examples and illustrations calculated to deepen understanding and generate new ideas.

Download or read book U S Civilian Uplift in Afghanistan Is Progressing But Implementation Continues written by John Brummet and published by DIANE Publishing. This book was released on 2011-04 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Civilian uplift's purpose is to increase the amount of civilian resources, incl. personnel, available to implement efforts to enhance Afghanistan governance capacity, improve rule of law, and initiate sustainable economic growth. The strategy also focuses on advancing these efforts at the field level. It is essential for agencies to ensure that these civilians have the support needed to achieve U.S. strategic goals in Kabul and at the field level. This report identifies: (1) the types and number of personnel provided to implement the civilian uplift and the extent to which the life and operational support needs of these personnel have been met; and (2) areas of concern raised during the initial stages of the uplift. Illus. A print on demand report.

Download or read book New Horizons for a Data Driven Economy written by José María Cavanillas and published by Springer. This book was released on 2016-04-04 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book readers will find technological discussions on the existing and emerging technologies across the different stages of the big data value chain. They will learn about legal aspects of big data, the social impact, and about education needs and requirements. And they will discover the business perspective and how big data technology can be exploited to deliver value within different sectors of the economy. The book is structured in four parts: Part I “The Big Data Opportunity” explores the value potential of big data with a particular focus on the European context. It also describes the legal, business and social dimensions that need to be addressed, and briefly introduces the European Commission’s BIG project. Part II “The Big Data Value Chain” details the complete big data lifecycle from a technical point of view, ranging from data acquisition, analysis, curation and storage, to data usage and exploitation. Next, Part III “Usage and Exploitation of Big Data” illustrates the value creation possibilities of big data applications in various sectors, including industry, healthcare, finance, energy, media and public services. Finally, Part IV “A Roadmap for Big Data Research” identifies and prioritizes the cross-sectorial requirements for big data research, and outlines the most urgent and challenging technological, economic, political and societal issues for big data in Europe. This compendium summarizes more than two years of work performed by a leading group of major European research centers and industries in the context of the BIG project. It brings together research findings, forecasts and estimates related to this challenging technological context that is becoming the major axis of the new digitally transformed business environment.

Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Download or read book Economics and Cognitive Science written by Paul Bourgine and published by Elsevier. This book was released on 2014-06-28 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economics, dealing with mental processes of decision makers is part of cognitive science; conversely, cognitive science, faced with constraints on information processing, is part of economics. In July 1990, the Cecoia 2 conference was organised in Paris to further explore the connections between the two. The papers presented in this volume illustrate this truly interdisciplinary research intertwining social and cognitive sciences. Three main topics are represented: agent's mental representation when facing complex uncertainty; agent's computational constraints leading to bounded rationality; agent's learning and evolution in an imperfectly known environment.

Download or read book Encyclopedia of Software Engineering Three Volume Set Print written by Phillip A. Laplante and published by CRC Press. This book was released on 2010-11-22 with total page 1441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software engineering requires specialized knowledge of a broad spectrum of topics, including the construction of software and the platforms, applications, and environments in which the software operates as well as an understanding of the people who build and use the software. Offering an authoritative perspective, the two volumes of the Encyclopedia of Software Engineering cover the entire multidisciplinary scope of this important field. More than 200 expert contributors and reviewers from industry and academia across 21 countries provide easy-to-read entries that cover software requirements, design, construction, testing, maintenance, configuration management, quality control, and software engineering management tools and methods. Editor Phillip A. Laplante uses the most universally recognized definition of the areas of relevance to software engineering, the Software Engineering Body of Knowledge (SWEBOK®), as a template for organizing the material. Also available in an electronic format, this encyclopedia supplies software engineering students, IT professionals, researchers, managers, and scholars with unrivaled coverage of the topics that encompass this ever-changing field. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Handbook of Research on Developments in E Health and Telemedicine Technological and Social Perspectives written by Cruz-Cunha, Maria Manuela and published by IGI Global. This book was released on 2009-12-31 with total page 1486 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provide a comprehensive coverage of the latest and most relevant knowledge, developments, solutions, and practical applications, related to e-Health, this new field of knowledge able to transform the way we live and deliver services, both from the technological and social perspectives"--Provided by publisher.

Download or read book Proceedings of the 4th International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Laszlo Monostori and published by Springer. This book was released on 2019-04-30 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 4th International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2019), held in Belgrade, Serbia, on 3–6 June 2019. The event marks the latest in a series of high-level conferences that bring together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including: design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and highlighting recent advances in manufacturing engineering and technologies, the book supports the transfer of vital knowledge to the next generation of academics and practitioners. Further, it will appeal to anyone working or conducting research in this rapidly evolving field.

Download or read book CORP 2012 Proceedings Tagungsband written by Manfred Schrenk and published by Lulu.com. This book was released on 2012 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: RE-MIXING THE CITY - Towards Sustainability and Resilience? There is nothing permanent except change. (Heraclitus) Cities worldwide are facing rapid social, economic, environmental, technological and cultural changes such as: rapid urbanisation, aging of society, security issues, housing emergency, new solutions on mobility, integration of immigrants, food and water shortage, etc. Especially in times of economic crisis and demographic changes in cities, it is necessary to think about how to best handle what we have, and therefore "RE-MIXING THE CITY" is a challenge to manage and re-combine the elements which make our modern cities in order to better respond to change.

Download or read book Models and Integrations written by Dante Cicchetti and published by University Rochester Press. This book was released on 1991 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the third consecutive set of annual proceedingsof the Rochester Symposium on Developmental Psychopathology. Contributions come from scholars who focus on model description, presentation of empirical data, and discussion of the implications of their work for developmental psychopathology. This integration of knowledge from diverse areas is combined with an exploration of how this knowledge can be put to use in a developmental perspective. DANTE CICCHETTI is Director of Mt Hope Family Centre, Rochester, a clinical and research facility serving high-risk populations of children and families; he is also Professor of Psychology and Psychiatry, University of Rochester. SHEREE L. TOTH is Associate Directorof Mt Hope Family Centre.The contributors are: OVERTON, HOROWITZ, ACHENBACH, ANGOLD, COSTELLO, LOEBER, PENNINGTON, OZONOFF, BENES, WALKER, DAVIS, GOTTLIEB, DAWSON, CROCKENBERG, COVEY, LIEBERMAN, SELMAN, SCHULTZ, YEATES.