Download or read book On Radiation induced Segregation and the Compositional Dependence of Swelling in Fe Ni Cr Alloys written by W. G. Wolfer and published by . This book was released on 1982 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Radiation induced Segregation and the Compositional Dependence of Swelling in Fe Ni Cr Alloys written by W. G. Wolfer and published by . This book was released on 1982 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microsegregation Observed in Fe 35 5Ni 7 5Cr Irradiated in EBR II written by HR. Brager and published by . This book was released on 1985 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: In another recent study of the compositional dependence of swelling in annealed iron-nickel-chromium alloys, it was found that some annealed alloys densified during irradiation. No precipitate phases were observed to form, however. At 593°C, one alloy, Fe-35.5Ni-7.5Cr, which was particularly resistant to swelling, increased in density 0.9% at 7.6 x 1022 neutrons (n)/cm2 (E > 0.1 MeV).
Download or read book Spinodal like Decomposition and Swelling Induced by Ion Irradiation in Simple Fe Ni and Fe Ni Cr Alloys written by RA. Dodd and published by . This book was released on 1987 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: A previously published correlation between the compositional dependence of neutron-induced swelling at high temperatures in Fe-Ni-Cr alloys and the development of compositional micro-oscillations has also been found in this study of swelling induced by 5-MeV Ni+ ion irradiation. The tendency toward decomposition is strongest in the 35 to 45% nickel range and diminishes in the range of 60 to 75% nickel. Chromium appears to play no role other than as a surrogate for iron. The scale of the micro-oscillation appears to be more sensitive to temperature than displacement rate. One consequence of this decomposition is the occasional formation of precipitate phases upon cooling after irradiation. In Fe-35Ni, cellular martensite is found to form after irradiation at 625, 675, and 725°C. In Fe-60Ni-15Cr irradiated at 625°C an ordered phase that may be Ni3(Fe,Cr) is sometimes formed. The fortuitous formation of these phases allows the visualization of the size and spacing of the compositional modulations.
Download or read book Effects of Radiation on Materials written by H. R. Brager and published by ASTM International. This book was released on 1982 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Radiation on Materials written by and published by ASTM International. This book was released on 1981 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.
Download or read book Modeling of Radiation induced Segregation in Austenitic Fe Cr Ni Alloys written by Todd Randall Allen and published by . This book was released on 1997 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation induced Segregation in Complex Alloys written by and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiation-induced segregation (RIS) of alloying elements to the surface during 3 MeV 58Ni ion bombardment was investigated in alloys of Fe-200Cr-12Ni (at. %) containing controlled additions of Si and Mo. The segregation profiles, determined by Auger electron spectroscopy, show that Ni and Si are enriched, while Cr and Mo are depleted at the irradiated surfaces. The data indicates that the RIS of Ni and Cr are affected by the presence of Mo and Si in the alloy. However, no obvious trends are observed as a function of the minor solute element concentration. The temperature dependence of the RIS of the alloying elements was also investigated. A maximum of segregation at approx. 500°C is observed for Si followed by a minimum and then a sharp increase in segregation at temperatures above 600°C. The temperature dependence of segregation for Cr, Ni and Mo shows continous increase with temperature in the temperature regime investigated. The void swelling data on these alloys is also presented as a function of temperature and composition. Additions of Si reduce the swelling by affecting both the nucleation and the growth of the voids. The peak swelling temperature for all the alloys containing minor solutes are found to be lower (approx. 50°C) than that of the base alloy (peak swelling temperature approx. 660°C).
Download or read book Effects of Radiation on Materials written by Roger E. Stoller and published by ASTM International. This book was released on 1992 with total page 1315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium held in Nashville, Tennessee, June 1990. Almost two-thirds of these 91 papers are authored by researchers outside of the US (including information on research in the former USSR, Japan, and Europe). Topics include: current commercial power reactor systems; microstructural characterization
Download or read book Radiation induced Changes in Microstructure written by F. A. Garner and published by ASTM International. This book was released on 1987 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling the Effect of Irradiation and Post irradiation Annealing on Grain Boundary Composition in Austenitic Fe Cr Ni Alloys written by and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many irradiation effects in Fe-Cr-Ni alloys such as radiation-induced segregation, radiation-enhanced diffusion, and void swelling are known to vary with bulk alloy composition. The development of microstructural and microchemical changes during irradiation and during post-irradiation annealing is determined by the rate of diffusion of point defects and alloying elements. To accurately predict the changes in grain boundary chemistry due to radiation-induced segregation and post-irradiation annealing, the composition dependence of diffusion parameters, such as the migration energy, must be known. A model has been developed which calculates migration diffusivity. The advantages of this calculational method are that a single set of input parameters can be used for a wide range of bulk alloy compositions, and the effects of local order can easily be incorporated into the calculations. A description of the model is presented, and model calculations are compared to segregation measurements from seven different iron-chromium-nickel alloys, irradiated with protons to doses from 0.1 to 3.0 dpa at temperatures between 200 C and 600 C. Results show that segregation trends can be modeled using a single set of input parameters with the difference between model calculation and measurement being less than 5 at%, but usually less than 2 at%. Additionally, model predictions are compared to grain boundary composition measurements of neutron irradiated 304 stainless steel following annealing. For the limited annealing data available, model calculations correctly predict the magnitude and time scale for recovery of the grain boundary composition.
Download or read book The Complex Action of Major Solutes on Radiation Induced Swelling of Fe Cr Ni Austenitic Alloys written by and published by . This book was released on 1992 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The radiation-induced swelling of simple Fe-Cr-Ni austenitic alloys is sensitive to solute additions. It is shown in this paper that three of the most common solute elements (P, Si, Mo) exert a very complex and often non-monotonic influence on swelling with increasing solute level. The complexity of this influence and its dependence on other variables appears to be the result of a closely balanced competition between two or more roles played by each solute in its interaction with both vacancies and interstitials. This competition yields a variety of different swelling behaviors in response to changes in solute or solvent composition, displacement rate, and irradiation temperature.
Download or read book Evaluation of Radiation Induced Segregation in Fe Ni Cr Alloys written by Carlos Daniel Flores and published by . This book was released on 1994 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASTM Special Technical Publication written by and published by . This book was released on 1982 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Complex Action of Major Solutes on Radiation Induced Swelling of Fe Cr Ni Austenitic Alloys written by FA. Garner and published by . This book was released on 1994 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The radiation-induced swelling of simple Fe-Cr-Ni austenitic alloys is known to be very sensitive to solute additions. It is shown in this paper that three of the most common solute elements (P,Si,Mo) exert a very complex and often non-monotonic influence on swelling with increasing solute level. The complexity of this influence and its dependence on other variables appears to be the result of a closely balanced competition between two or more roles played by each solute in its interaction with both vacancies and interstitials. This competition yields a variety of different swelling behaviors in response to changes in solute or solvent composition, displacement rate, and irradiation temperature.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
