Download or read book On Chip Inductance in High Speed Integrated Circuits written by Yehea I. Ismail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The appropriate interconnect model has changed several times over the past two decades due to the application of aggressive technology scaling. New, more accurate interconnect models are required to manage the changing physical characteristics of integrated circuits. Currently, RC models are used to analyze high resistance nets while capacitive models are used for less resistive interconnect. However, on-chip inductance is becoming more important with integrated circuits operating at higher frequencies, since the inductive impedance is proportional to the frequency. The operating frequencies of integrated circuits have increased dramatically over the past decade and are expected to maintain the same rate of increase over the next decade, approaching 10 GHz by the year 2012. Also, wide wires are frequently encountered in important global nets, such as clock distribution networks and in upper metal layers, and performance requirements are pushing the introduction of new materials for low resistance interconnect, such as copper interconnect already used in many commercial CMOS technologies. On-Chip Inductance in High Speed Integrated Circuits deals with the design and analysis of integrated circuits with a specific focus on on-chip inductance effects. It has been described throughout this book that inductance can have a tangible effect on current high speed integrated circuits. For example, neglecting inductance and using an RC interconnect model in a production 0.25 mum CMOS technology can cause large errors (over 35%) in estimates of the propagation delay of on-chip interconnect. It has also been shown that including inductance in the repeater insertion design process as compared to using an RC model improves the overall repeater solution in terms of area, power, and delay with average savings of 40.8%, 15.6%, and 6.7%, respectively. On-Chip Inductance in High Speed Integrated Circuits is full of design and analysis techniques for RLC interconnect. These techniques are compared to techniques traditionally used for RC interconnect design to emphasize the effect of inductance. emOn-Chip Inductance in High Speed Integrated Circuits will be of interest to researchers in the area of high frequency interconnect, noise, and high performance integrated circuit design.

Download or read book Power Distribution Networks in High Speed Integrated Circuits written by Andrey Mezhiba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributing power in high speed, high complexity integrated circuits has become a challenging task as power levels exceeding tens of watts have become commonplace while the power supply is plunging toward one volt. This book is dedicated to this important subject. The primary purpose of this monograph is to provide insight and intuition into the behavior and design of power distribution systems for high speed, high complexity integrated circuits.

Download or read book VHSIC Very High Speed Integrated Circuits written by Arpad Barna and published by John Wiley & Sons. This book was released on 1981 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High speed Integrated Circuit Technology written by Mark J. W. Rodwell and published by World Scientific. This book was released on 2001 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the state of the art of very high speed digital integrated circuits. Commercial applications are in fiber optic transmission systems operating at 10, 40, and 100 Gb/s, while the military application is ADCs and DACs for microwave radar. The book contains detailed descriptions of the design, fabrication, and performance of wideband Si/SiGe-, GaAs-, and InP-based bipolar transistors. The analysis, design, and performance of high speed CMOS, silicon bipolar, and III-V digital ICs are presented in detail, with emphasis on application in optical fiber transmission and mixed signal ICs. The underlying physics and circuit design of rapid single flux quantum (RSFQ) superconducting logic circuits are reviewed, and there is extensive coverage of recent integrated circuit results in this technology. Contents: Preface (M J W Rodwell); High-Speed and High-Data-Bandwidth Transmitter and Receiver for Multi-Channel Serial Data Communication with CMOS Technology (M Fukaishi et al.); High-Performance Si and SiGe Bipolar Technologies and Circuits (M Wurzer et al.); Self-Aligned Si BJT/SiGe HBT Technology and Its Application to High-Speed Circuits (K Washio); Small-Scale InGaP/GaAs Heterojunction Bipolar Transistors for High-Speed and Low-Power Integrated-Circuit Applications (T Oka et al.); Prospects of InP-Based IC Technologies for 100-Gbit/S-Class Lightwave Communications Systems (T Enoki et al.); Scaling of InGaAs/InAlAs HBTs for High Speed Mixed-Signal and mm-Wave ICs (M J W Rodwell); Progress Toward 100 GHz Logic in InP HBT IC Technology (C H Fields et al.); Cantilevered Base InP DHBT for High Speed Digital Applications (A L Gutierrez-Aitken et al.); RSFQ Technology: Physics and Devices (P Bunyk et al.); RSFQ Technology: Circuits and Systems (D K Brock). Readership: Researchers, industrialists and academics in electrical and electronic engineering.

Download or read book Integrated Circuit and System Design Power and Timing Modeling Optimization and Simulation written by Nadine Azemard and published by Springer. This book was released on 2007-08-21 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features the refereed proceedings of the 17th International Workshop on Power and Timing Modeling, Optimization and Simulation. Papers cover high level design, low power design techniques, low power analog circuits, statistical static timing analysis, power modeling and optimization, low power routing optimization, security and asynchronous design, low power applications, modeling and optimization, and more.

Download or read book Integrated Circuit and System Design written by Enrico Macii and published by Springer. This book was released on 2004-08-24 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: WelcometotheproceedingsofPATMOS2004,thefourteenthinaseriesofint- national workshops. PATMOS 2004 was organized by the University of Patras with technical co-sponsorship from the IEEE Circuits and Systems Society. Over the years, the PATMOS meeting has evolved into an important - ropean event, where industry and academia meet to discuss power and timing aspects in modern integrated circuit and system design. PATMOS provides a forum for researchers to discuss and investigate the emerging challenges in - sign methodologies and tools required to develop the upcoming generations of integrated circuits and systems. We realized this vision this year by providing a technical program that contained state-of-the-art technical contributions, a keynote speech, three invited talks and two embedded tutorials. The technical program focused on timing, performance and power consumption, as well as architectural aspects, with particular emphasis on modelling, design, charac- rization, analysis and optimization in the nanometer era. This year a record 152 contributions were received to be considered for p- sible presentation at PATMOS. Despite the choice for an intense three-day m- ting, only 51 lecture papers and 34 poster papers could be accommodated in the single-track technical program. The Technical Program Committee, with the - sistance of additional expert reviewers, selected the 85 papers to be presented at PATMOS and organized them into 13 technical sessions. As was the case with the PATMOS workshops, the review process was anonymous, full papers were required, and several reviews were received per manuscript.

Download or read book Electromagnetics for High Speed Analog and Digital Communication Circuits written by Ali M. Niknejad and published by Cambridge University Press. This book was released on 2007-02-22 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern communications technology demands smaller, faster and more efficient circuits. This book reviews the fundamentals of electromagnetism in passive and active circuit elements, highlighting various effects and potential problems in designing a new circuit. The author begins with a review of the basics - the origin of resistance, capacitance, and inductance - then progresses to more advanced topics such as passive device design and layout, resonant circuits, impedance matching, high-speed switching circuits, and parasitic coupling and isolation techniques. Using examples and applications in RF and microwave systems, the author describes transmission lines, transformers, and distributed circuits. State-of-the-art developments in Si based broadband analog, RF, microwave, and mm-wave circuits are reviewed. With up-to-date results, techniques, practical examples, illustrations and worked examples, this book will be valuable to advanced undergraduate and graduate students of electrical engineering, and practitioners in the IC design industry. Further resources for this title are available at www.cambridge.org/9780521853507.

Download or read book High speed Circuit Board Signal Integrity written by Stephen C. Thierauf and published by Artech House. This book was released on 2004 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This leading-edge circuit design resource offers the knowledge needed to quickly pinpoint transmission problems that can compromise circuit design. Discusses both design and debug issues at gigabit per second data rates.

Download or read book Handbook of Algorithms for Physical Design Automation written by Charles J. Alpert and published by CRC Press. This book was released on 2008-11-12 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical design flow of any project depends upon the size of the design, the technology, the number of designers, the clock frequency, and the time to do the design. As technology advances and design-styles change, physical design flows are constantly reinvented as traditional phases are removed and new ones are added to accommodate changes in technology. Handbook of Algorithms for Physical Design Automation provides a detailed overview of VLSI physical design automation, emphasizing state-of-the-art techniques, trends and improvements that have emerged during the previous decade. After a brief introduction to the modern physical design problem, basic algorithmic techniques, and partitioning, the book discusses significant advances in floorplanning representations and describes recent formulations of the floorplanning problem. The text also addresses issues of placement, net layout and optimization, routing multiple signal nets, manufacturability, physical synthesis, special nets, and designing for specialized technologies. It includes a personal perspective from Ralph Otten as he looks back on the major technical milestones in the history of physical design automation. Although several books on this topic are currently available, most are either too broad or out of date. Alternatively, proceedings and journal articles are valuable resources for researchers in this area, but the material is widely dispersed in the literature. This handbook pulls together a broad variety of perspectives on the most challenging problems in the field, and focuses on emerging problems and research results.

Download or read book Ultra High Speed CMOS Circuits written by Sam Gharavi and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the CMOS-based millimeter wave circuits and devices and presents methods and design techniques to use CMOS technology for circuits operating beyond 100 GHz. Coverage includes a detailed description of both active and passive devices, including modeling techniques and performance optimization. Various mm-wave circuit blocks are discussed, emphasizing their design distinctions from low-frequency design methodologies. This book also covers a device-oriented circuit design technique that is essential for ultra high speed circuits and gives some examples of device/circuit co-design that can be used for mm-wave technology.

Download or read book Signal Integrity Effects in Custom IC and ASIC Designs written by Raminderpal Singh and published by John Wiley & Sons. This book was released on 2001-12-12 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...offers a tutorial guide to IC designers who want to move to the next level of chip design by unlocking the secrets of signal integrity." —Jake Buurma, Senior Vice President, Worldwide Research & Development, Cadence Design Systems, Inc. Covers signal integrity effects in high performance Radio Frequency (RF) IC Brings together research papers from the past few years that address the broad range of issues faced by IC designers and CAD managers now and in the future A Wiley-IEEE Press publication

Download or read book Proceedings of the Midwest Symposium on Circuits and Systems written by and published by . This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Distribution Networks with On Chip Decoupling Capacitors written by Mikhail Popovich and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insight into the behavior and design of power distribution systems for high speed, high complexity integrated circuits. Also presented are criteria for estimating minimum required on-chip decoupling capacitance. Techniques and algorithms for computer-aided design of on-chip power distribution networks are also described; however, the emphasis is on developing circuit intuition and understanding the principles that govern the design and operation of power distribution systems.

Download or read book High Performance Integrated Circuit Design written by Emre Salman and published by McGraw Hill Professional. This book was released on 2012-08-21 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest techniques for designing robust, high performance integrated circuits in nanoscale technologies Focusing on a new technological paradigm, this practical guide describes the interconnect-centric design methodologies that are now the major focus of nanoscale integrated circuits (ICs). High Performance Integrated Circuit Design begins by discussing the dominant role of on-chip interconnects and provides an overview of technology scaling. The book goes on to cover data signaling, power management, synchronization, and substrate-aware design. Specific design constraints and methodologies unique to each type of interconnect are addressed. This comprehensive volume also explains the design of specialized circuits such as tapered buffers and repeaters for data signaling, voltage regulators for power management, and phase-locked loops for synchronization. This is an invaluable resource for students, researchers, and engineers working in the area of high performance ICs. Coverage includes: Technology scaling Interconnect modeling and extraction Signal propagation and delay analysis Interconnect coupling noise Global signaling Power generation Power distribution networks CAD of power networks Techniques to reduce power supply noise Power dissipation Synchronization theory and tradeoffs Synchronous system characteristics On-chip clock generation and distribution Substrate noise in mixed-signal ICs Techniques to reduce substrate noise

Download or read book On Chip Power Delivery and Management written by Inna P. Vaisband and published by Springer. This book was released on 2016-04-26 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methods for distributing power in high speed, high complexity integrated circuits with power levels exceeding many tens of watts and power supplies below a volt. It provides a broad and cohesive treatment of power delivery and management systems and related design problems, including both circuit network models and design techniques for on-chip decoupling capacitors, providing insight and intuition into the behavior and design of on-chip power distribution systems. Organized into subareas to provide a more intuitive flow to the reader, this fourth edition adds more than a hundred pages of new content, including inductance models for interdigitated structures, design strategies for multi-layer power grids, advanced methods for efficient power grid design and analysis, and methodologies for simultaneously placing on-chip multiple power supplies and decoupling capacitors. The emphasis of this additional material is on managing the complexity of on-chip power distribution networks.

Download or read book GaAs Microelectronics written by Norman G. Einspruch and published by Academic Press. This book was released on 2014-12-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Electronics Microstructure Science, Volume 11: GaAs Microelectronics presents the important aspects of GaAs (Gallium Arsenide) IC technology development ranging from materials preparation and IC fabrication to wafer evaluation and chip packaging. The volume is comprised of eleven chapters. Chapter 1 traces the historical development of GaAs technology for high-speed and high-frequency applications. This chapter summarizes the important properties of GaAs that serve to make this material and its related compounds technologically important. Chapter 2 covers GaAs substrate growth, ion implantation and annealing, and materials characterization, technologies that are essential for IC development. Chapters 3-6 describe the various IC technologies that are currently under development. These include microwave and digital MESFET ICs, the most mature technologies, and bipolar and field-effect heterostructure transistor ICs. The high-speed capability of GaAs ICs introduces new problems, on-wafer testing and packaging. These topics are discussed in Chapters 7 and 8. Applications for GaAs ICs are covered in Chapters 9 and 10. The first of these chapters is concerned with high speed computer applications; the second addresses military applications. The book concludes with a chapter on radiation effects in GaAs ICs. Scientists, engineers, researchers, device designers, and systems architects will find the book useful.

Download or read book Interconnect Technologies for Integrated Circuits and Flexible Electronics written by Yash Agrawal and published by Springer Nature. This book was released on 2023-10-17 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed book provides a thorough understanding of the basics along with detailed state-of-the-art emerging interconnect technologies for integrated circuit design and flexible electronics. It focuses on the investigation of advanced on-chip interconnects which match the current as well as future technology requirements. The contents focus on different aspects of interconnects such as material, physical characteristics, parasitic extraction, design, structure, modeling, machine learning, and neural network-based models for interconnects, signaling schemes, varying signal integrity performance analysis, variability, reliability aspects, associated electronic design automation tools. The book also explores interconnect technologies for flexible electronic systems. It also highlights the integration of sensors with stretchable interconnects to demonstrate the concept of a stretchable sensing network for wearable and flexible applications. This book is a useful guide for those working in academia and industry to understand the fundamentals and application of interconnect technologies.