Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2007-01-15 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship-shaped offshore units are some of the more economical systems for the development of offshore oil and gas, and are often preferred in marginal fields. These systems are especially attractive to develop oil and gas fields in deep and ultra-deep water areas and remote locations away from existing pipeline infrastructures. Recently, the ship-shaped offshore units have been applied to near shore oil and gas terminals. This 2007 text is an ideal reference on the technologies for design, building and operation of ship-shaped offshore units, within inevitable space requirements. The book includes a range of topics, from the initial contracting strategy to decommissioning and the removal of the units concerned. Coverage includes both fundamental theory and principles of the individual technologies. This book will be useful to students who will be approaching the subject for the first time as well as designers working on the engineering for ship-shaped offshore installations.
Download or read book Ship Shaped Offshore Installations written by Jeom Kee Paik and published by Cambridge University Press. This book was released on 2022-02-17 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the safe engineering of ship-shaped offshore installations with this fully updated second edition.
Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2019-11-06 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Structures: Design, Construction and Maintenance, Second Edition covers all types of offshore structures and platforms employed worldwide. As the ultimate reference for selecting, operating and maintaining offshore structures, this book provides a roadmap for designing structures which will stand up even in the harshest environments. Subsea pipeline design and installation is also covered in this edition, as is the selection of the proper type of offshore structure, the design procedure for the fixed offshore structure, nonlinear analysis (Push over) as a new technique to design and assess the existing structure, and more. With this book in hand, engineers will have the most up-to-date methods for performing a structural lifecycle analysis, implementing maintenance plans for topsides and jackets and using non-destructive testing. - Provides a one-stop guide to offshore structure design and analysis - Presents easy-to-understand methods for structural lifecycle analysis - Contains expert advice for designing offshore platforms for all types of environments
Download or read book Offshore Oil and Gas Installations Security written by Mikhail Kashubsky and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5.6.3 Capabilities and tactics
Download or read book Mooring System Engineering for Offshore Structures written by Kai-Tung Ma and published by Gulf Professional Publishing. This book was released on 2019-06-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mooring system is a vital component of various floating facilities in the oil, gas, and renewables industries. However, there is a lack of comprehensive technical books dedicated to the subject. Mooring System Engineering for Offshore Structures is the first book delivering in-depth knowledge on all aspects of mooring systems, from design and analysis to installation, operation, maintenance and integrity management. The book gives beginners a solid look at the fundamentals involved during mooring designs with coverage on current standards and codes, mooring analysis and theories behind the analysis techniques. Advanced engineers can stay up-to-date through operation, integrity management, and practical examples provided. This book is recommended for students majoring in naval architecture, marine or ocean engineering, and allied disciplines in civil or mechanical engineering. Engineers and researchers in the offshore industry will benefit from the knowledge presented to understand the various types of mooring systems, their design, analysis, and operations. - Understand the various types of mooring systems and the theories behind mooring analysis - Gain practical experience and lessons learned from worldwide case studies - Combine engineering fundamentals with practical applications to solve today's offshore challenges
Download or read book Offshore Installations Emergency Evacuation written by United States. Congress. House. Committee on Merchant Marine and Fisheries. Subcommittee on Panama Canal/Outer Continental Shelf and published by . This book was released on 1985 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Wind written by Kurt Thomsen and published by Academic Press. This book was released on 2014-07-10 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Wind is the first-ever roadmap to successful offshore wind installation. It provides a ready reference for wind project managers, teaching them how to deal with complications on-site, as well as for financers, who can utilize the text as an easy guide to asking the pivotal questions of petitioning wind project developers. These developers' planning stages will be improved by the book's expert advice on how to avoid wasting money by scoping out and mitigating potential problems up-front. Wind turbine manufacturers will benefit from insights into design optimization to support cheaper installation and hauling, thereby incurring lower project costs, and helping developers establish a quicker route to profitability. The book sheds light not just on how to solve a particular installation difficulty, but delves into why the problem may best be solved in that way. - Enables all stakeholders to realize cheaper, faster, and safer offshore wind projects - Explains the different approaches to executing on- and offshore projects, highlighting theeconomic impacts of the various financial and operational choices - Provides practical, proven advice on how tough challenges can be overcome,using real-life examples from the author's experiences to illustrate key issues
Download or read book Offshore Pipelines written by Boyun Guo and published by Elsevier. This book was released on 2005-04-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.
Download or read book Offshore Safety Management written by Ian Sutton and published by William Andrew. This book was released on 2011-10-11 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2010 was a defining year for the offshore oil and gas industry in the United States. On April 20, 2010, the Deepwater Horizon (DWH) floating drilling rig suffered a catastrophic explosion and fire. Eleven men died in the explosion — 17 others were injured. The fire, which burned for a day and a half, eventually sent the entire rig to the bottom of the sea. The extent of the spill was enormous, and the environmental damage is still being evaluated. Following DWH the Bureau of Ocean Energy Management, Regulations and Enforcement (BOEMRE) issued many new regulations. One of them is the Safety and Environmental System (SEMS) rule, which is based on the American Petroleum Institute's SEMP recommended practice. Companies have to be in full compliance with its extensive requirements by November 15, 2011.
Download or read book Handbook of Offshore Oil and Gas Operations written by James G. Speight and published by Elsevier. This book was released on 2014-10-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. - Quickly become familiar with the oil and gas offshore industry, including deepwater operations - Understand the full spectrum of the business, including environmental impacts and future challenges - Gain knowledge and exposure on critical standards and real-world case studies
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Risk Assessment and Management for Ships and Offshore Structures written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2024-04-04 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volatile, uncertain, complex, and ambiguous (VUCA) nature of environmental and operational conditions is still the major cause of marine accidents, with knock-on effects in terms of casualties, property damage, and marine pollution. Recognized as the most effective approach to navigate VUCA environments, risk-based assessment methods provide a solution to address challenges associated with health, safety, and environmental protection in extreme conditions and when accidents involving engineering structures and infrastructure occur. This book serves as a comprehensive guide to the foundational principles, current practices, and cuttingedge trends in quantitative risk assessment and management for ships and offshore structures. With six partsencompassing a total of 35 chapters, it covers risk assessment and management for offshore installations, oil and gas leaks, collisions and grounding, and fires and explosions. Tailored for ship and offshore structural engineers, naval architects, as well as mechanical and civil engineers involved in advanced safety studies, this book is an invaluable resource for both practicing engineers and researchers in this field.• Offers insights into quantitative risk assessment and asset management for ships and offshore structures inextreme conditions and in the event of accidents• Equips engineers with valuable statistical data sets and enhances data assimilation techniques for precisehazard frequency calculations• Seamlessly integrates fundamental principles with practical applications, addressing emerging challengesand leveraging the latest technological advances in the field
Download or read book Introduction to Offshore Structures written by William J. Graff and published by Gulf Publishing. This book was released on 1981 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Installation Practice written by J. Crawford and published by Butterworth-Heinemann. This book was released on 2016-02-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Installation Practice describes the main requirements and applications for safe offshore installation and operation. This book discusses the arrangements to be accepted by national and international classification and certification authorities with respect to flare systems, fuel gas and crude oil burning, fire protection, fire detection and extinction, heat exchangers, and piping design. The importance of life-support systems is also highlighted. This book is comprised of 18 chapters and begins by introducing the reader to offshore gas and oil production platforms, with emphasis on safety considerations for fixed drilling/production platforms, produced fluid systems, and the gas injection compression system. The discussion then turns to piping systems; fuel gas and crude-oil burning arrangements; flare systems; and equipment for offshore-related projects, such as storage tankers and barges, compensator systems, and floating production and storage units. The chapters that follow focus on safety shutdown systems; the design of submersibles and diving equipment; and the basic principles of fire protection systems. This book concludes by considering the regulatory requirements for the prevention of oil pollution arising from offshore oil and gas exploration. This monograph will be useful as a reference work for those engaged in the design and installation of offshore units.
Download or read book Orientation for Offshore Crane Operations written by and published by Petroleum Extension Service. This book was released on 1997-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expanded edition, in a completely redesigned, easier-to-read format, acquaints offshore personnel with parts and functions of pedestal cranes, including prime movers and transmissions. Discusses wire rope and slings and safe load rigging and handling; also covers safe hoisting procedures and hand signals. All measurements are given in both U.S. and SI units. There are illustrations, summary boxes, and study questions.
Download or read book Offshore Structures written by Mohamed A. El-Reedy and published by Gulf Professional Publishing. This book was released on 2012-07-17 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate reference for selecting, operating and maintaining offshore structures, provides a road map for designing structures which will stand up even in the harshest environments. The selection of the proper type of offshore structure is discussed from a technical and economic point of view.
Download or read book Construction of Prestressed Concrete Structures written by Ben C. Gerwick, Jr. and published by John Wiley & Sons. This book was released on 1997-02-13 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die zweite Auflage dieses Klassikers - jetzt als Paperback - bietet Profis auf diesem Gebiet eine aktuelle und kompetente Präsentation der Technologie der Vorbelastung von Stahlbeton. Grundlegende Techniken, Materialien und Systeme werden behandelt und vielfältige Anwendungen - Gebäude, Brücken, Bohrplattformen, Straßen, Rollbahnen, Rohrleitungen - erläutert.
