Download or read book Observation of S channel Production of Single Top Quarks at the Tevatron written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We report the first observation of single-top-quark production in the s channel through the combination of the CDF and D0 measurements of the cross section in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. The data correspond to total integrated luminosities of up to 9.7 fb-1 per experiment. The measured cross section is $\sigma_s = 1.29^{+0.26}_{-0.24}$ pb. The probability of observing a statistical fluctuation of the background to a cross section of the observed size or larger is $1.8 \times 10^{-10}$, corresponding to a significance of 6.3 standard deviations for the presence of an s-channel contribution to the production of single-top quarks.

Download or read book Observation of the S channel and Other Studies of Single Top Quarks at the Tevatron written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: First observation of single-top-quark production in the s channel is reported. The result is based on the combination of the CDF and D0 measurements of the cross section in proton-antiproton collisions at a center-of-mass energy of 1.96 TeV. A summary of other recent single-top-quark results are also included.

Download or read book Observation of S Channel Single Top Quark Production at the Tevatron written by and published by . This book was released on 2014 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: Testing the Standard Model (SM) and looking for new phenomena have been the focus of generations of particle physicists in the last decades. Following this spirit, this thesis presents two searches. The first is the search for single top quark production from the exchange of an s-channel virtual W boson using events with an imbalance in the total transverse energy, b-tagged jets, and no identified leptons. Assuming the electroweak production of top quarks of mass 172.5 GeV/c2 in the s-channel, a cross section of 1.12+0.61 -0.57 (stat+syst) pb, with a significance of 1.9 standard deviations, is measured. This measurement is combined with the result obtained from events with an imbalance in total transverse momentum, b-tagged jets, and exactly one identified lepton, yielding a cross section of 1.36+0.37 -0.322 (stat+syst) pb, with a significance of 4.2 standard deviations. The first observation of single-top-quark production in the s channel through the combination of the CDF and D0 measurements is also reported. The measured cross section is [sigma]s = 1.29+0.26 -0.244 pb. The probability of observing a statistical fluctuation of the background to a cross section of the observed size or larger is 1.8 10-10, corresponding to a significance of 6.3 standard deviation. The second is the search for W'-like resonances decaying to tb. No significant excess above the SM prediction is found. Using a benchmark W' → tb left-right symmetric model, 95% C.L. mass-dependent upper limits are placed on the W0 boson production cross section times branching ratio to tb. Assuming a W' boson with SM-like couplings and allowed (forbidden) decay to leptons, W' → tb is excluded with 95% C.L. for W' boson masses below 860 (880) GeV/c2. Relaxing the hypothesis on SM-like couplings, we exclude W' boson coupling strength values as a function of the W' boson mass above 10% of the SM coupling strength for MW' = 300 GeV/c2. The constraints obtained with the present analysis are the most stringent for charged resonance masses below 570 GeV/c2 decaying to a top and a bottom quark.

Download or read book Observation of S channel Single Top Quark Production at the Tevatron written by Matteo Cremonesi and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Summary of Single Top Quark Production at the Tevatron written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of single-top quarks occurs via the weak interaction at the Fermilab Tevatron proton-antiproton collider. Single top quark events are selected in the lepton+jets final state by CDF and D0 and in the missing transverse energy plus jets final state by CDF. Multivariate classifiers separate the s-channel and t-channel single-top signals from the large backgrounds. The combination of CDF and D0 results leads to the first observation of the s-channel mode of single top quark production. The t-channel and single top combined cross sections have also been measured.

Download or read book Observation of t channel Electroweak Top Quark Production written by and published by . This book was released on 2011 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark is the heaviest known fundamental particle, with a mass of 172.0+0.9-1.3GeV. This is nearly twice the mass of the second heaviest known particle, the Z boson, and roughly the mass of a gold atom. Because of its unusually large mass, studying the top quark may provide insight into the Higgs mechanism and other beyond the standard model physics. Only two accelerators in the world are powerful enough to produce top quarks. The Tevatron, which first accelerated protons in 1983, has produced almost 400,000 top quarks, roughly half at each of its two detectors: DO and CDF. The LHC is a much newer accelerator which currently has accumulated about 0.5% as much data as the Tevatron. However, when running at full luminosity, the LHC is capable of producing a top quark about once every second and will quickly surpass the Tevatron as the leading producer of top quarks. This analysis uses data from the DØ detector at the Tevatron, which are described in chapter 3. Top quarks are produced most often in pairs of top and anti-top quarks through an interaction of the strong force. This production mode was first observed in 1995 at the Tevatron. However, top quarks can also be produced though an electroweak interaction, which produces just one top quark. This production mode was first observed at the Tevatron in 2008. Single top quark production can occur in different channels. In this analysis, a measurement of the cross section of the t-channel production mode is performed. This measurement uses 5.4 fb-1 of data and uses the technique of boosted decision trees in order to separate signal from background events. The t-channel cross section is measured to be: ?(p$ar{p}$ → tqb + X) = 3.03+0.78-0.66 pb (0.0.1). Additional cross section measurements were also performed for the s-channel as well as the s + t-channel. The measurement of each one of these three cross sections was repeated three times using different techniques, and all three methods were combined into a 'super-method' which achieves the best performance. The details of these additional measurements are shown in appendix A.

Download or read book Observation of Single Top Quark Production written by and published by . This book was released on 2009 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at (square root)s = 1.96 Tev using 2.3 fb−1 of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} --> tb + X, tqb + X is 3.94 ± 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10−7, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 ± 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.

Download or read book Observation of Single Top Quark Production at the Tevatron written by and published by . This book was released on 2009 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper reports on the first observation of electroweak production of single top quarks by the D0 and CDF collaborations. At Fermilab's 1.96 TeV proton-antiproton collider, a few thousand events are selected from several inverse femtobarns of data that contain an isolated electron or muon and/or missing transverse energy, together with jets that originate from the decays of b quarks. Using sophisticated multivariate analyses to separate signal from background, the D0 collaboration measures a cross section [sigma] (p{bar p} → tb + X, tqb + X) = 3.94 ± 0.88 pb (for a top quark mass of 170 GeV) and the CDF collaboration measures a value of 2.3{sub -0.5}{sup +0.6} pb (for a top quark mass of 175 GeV). These values are consistent with theoretical predictions at next-to-leading order precision. Both measurements have a significance of 5.0 standard deviations, meeting the benchmark to be considered unambiguous observation.

Download or read book Observation of Electroweak Single Top Quark Production with the CDF II Experiment written by and published by . This book was released on 2009 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard model of elementary particle physics (SM) predicts, besides the top-quark pair production via the strong interaction, also the electroweak production of single top-quarks [19]. Up to now, the Fermilab Tevatron proton-antiproton-collider is the only place to produce and study top quarks emerging from hadron-hadron-collisions. Top quarks were directly observed in 1995 during the Tevatron Run I at a center-of-mass energy of √s = 1.8 TeV simultaneously by the CDF and D0 Collaborations via the strong production of top-quark pairs. Run II of the Tevatron data taking period started 2001 at √s = 1.96 TeV after a five year upgrade of the Tevatron accelerator complex and of both experiments. One main component of its physics program is the determination of the properties of the top quark including its electroweak production. Even though Run II is still ongoing, the study of the top quark is already a successful endeavor, confirmed by dozens of publications from both Tevatron experiments. A comprehensive review of top-quark physics can be found in reference. The reasons for searching for single top-quark production are compelling. As the electroweak top-quark production proceeds via a Wtb vertex, it provides the unique opportunity of the direct measurement of the CKM matrix element.

Download or read book Studies of Single Top Quark Production at the Tevatron written by and published by . This book was released on 2011 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper we present several measurements of single top quark production from the CDF and D0 experiments at the Tevatron. The various analyses utilize integrated luminosity ranging from 2.1 to 4.8 fb−1. The results include the observation of single top production with a combined cross section of 2.76{sub -0.47}{sup +0.58} pb for a top quark mass of 170 GeV/c2, as well as measurements of top quark polarization and first evidence for t-channel production.

Download or read book Observation of Single Top Quark Production at the Tevatron Collider written by and published by . This book was released on 2010 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Top Quark Physics at Hadron Colliders written by Arnulf Quadt and published by Springer Science & Business Media. This book was released on 2007-08-16 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This will be a required acquisition text for academic libraries. More than ten years after its discovery, still relatively little is known about the top quark, the heaviest known elementary particle. This extensive survey summarizes and reviews top-quark physics based on the precision measurements at the Fermilab Tevatron Collider, as well as examining in detail the sensitivity of these experiments to new physics. Finally, the author provides an overview of top quark physics at the Large Hadron Collider.

Download or read book Discovery of Single Top Quark Production written by Dag Gillberg and published by Springer Science & Business Media. This book was released on 2011-01-22 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark is by far the heaviest known fundamental particle with a mass nearing that of a gold atom. Because of this strikingly high mass, the top quark has several unique properties and might play an important role in electroweak symmetry breaking—the mechanism that gives all elementary particles mass. Creating top quarks requires access to very high energy collisions, and at present only the Tevatron collider at Fermilab is capable of reaching these energies. Until now, top quarks have only been observed produced in pairs via the strong interaction. At hadron colliders, it should also be possible to produce single top quarks via the electroweak interaction. Studies of single top quark production provide opportunities to measure the top quark spin, how top quarks mix with other quarks, and to look for new physics beyond the standard model. Because of these interesting properties, scientists have been looking for single top quarks for more than 15 years. This thesis presents the first discovery of single top quark production. It documents one of the flagship measurements of the D0 experiment, a collaboration of more than 600 physicists from around the world. It describes first observation of a physical process known as “single top quark production”, which had been sought for more than 10 years before its eventual discovery in 2009. Further, his thesis describes, in detail, the innovative approach Dr. Gillberg took to this analysis. Through the use of Boosted Decision Trees, a machine-learning technique, he observed the tiny single top signal within an otherwise overwhelming background. This Doctoral Thesis has been accepted by Simon Fraser University, Burnaby, BC, Canada.

Download or read book Measurement of the Single Top Production Cross Section in Proton antiproton Collisions at 1 96 TeV written by and published by . This book was released on 2010 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes a search for singly produced top quarks via an electroweak vertex in head-on proton-antiproton collisions at a center of mass energy of √s = 1.96 TeV. The analysis uses a total of 2.3 fb−1 of data collected with the D0 detector at Fermilab, corresponding to two different run periods of the Tevatron collider. Two channels contribute to single top quark production at the Tevatron, the s-channel and the t-channel. In the s-channel, a virtual W boson is produced from the aniquilation of a quark and an antiquark and a top and a bottom quarks are produced from the W decay. The top quark decays almost exclusively into a W boson and a bottom quark. Final states are considered in which the W boson decays leptonically into an electron or a muon plus a neutrino. Thus, at the detector level, the final state characterizing the s-channel contains one lepton, missing energy accounting for the neutrino, and two jets from the two bottom quarks. In the t-channel, the final state has an additional jet coming from a light quark. Clearly, a precise reconstruction of the events requires a precise measurement of the energy of the jets. A multivariate technique, Bayesian neural networks, is used to extract the single top signal from the overwhelming background still left after event selection. A Bayesian likelihood probability is then computed to measure the single top cross section. Assuming the observed excess is due to single top events, the measured single top quark production cross section is [sigma](p{bar p} → tb + X, tqb + X) = 4.70{sub -0.93}{sup +1.18} pb. The observed excess is associated with a p-value of (3.2 ± 2.3) x 10−8, assuming the background-only hypothesis. This p-value corresponds to an excess over background of 5.4 standard deviations for a Gaussian density. The p-value computed using the standard model signal cross section of 3.46 pb is (22.7 ± 0.6) x 10−6, corresponding to an expected significance of 4.08 standard deviations.

Download or read book Single Top Quark Production at the Tevatron written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The observation of single top quark production by the CDF and D0 collaborations is one of the flagship measurements of the Run II of the Tevatron. The Tevatron combined single top quark cross section is measured to be: [sigma](tb + X, tqb + X) = 2.8{sub -0.5}{sup +0.6} pb for a top quark mass of 170 GeV. This result is in agreement with the standard model production of a single top quark together with a jet in p{bar p} collisions at √s = 1.96 TeV and allows to measure the CKM matrix element.

Download or read book Uncovering the Single Top written by Jorge Armando Benitez and published by . This book was released on 2009 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tevatron Combination of Single Top Quark Production and Vtb Measurement written by and published by . This book was released on 2010 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: After the first observation of the inclusive single top-quark production in the s- and t-channels by CDF and D0, both Tevatron collaborations combined their measurements using the distributions of their multivariate discriminants. A Bayesian analysis is used to extract the cross section at a center of mass energy of 1.96 TeV from 3.2 fb−1 (CDF) and 2.3 fb−1 (D0) of data, respectively. For a top quark mass of 170 GeV/c2, a cross section of 2.76 + 0.58 - 0.47 pb is extracted while the CKM matrix element.