Download or read book Numerical study of coupled THM C processes related to geo energy production written by Yang Gou and published by Cuvillier Verlag. This book was released on 2018-06-20 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis a parallel simulation platform, namely TOUGH2MP-FLAC3Dplus, was further developed by linking the multiphase multicomponent flow code TOUGH2MP and the further developed geomechanical code FLAC3Dplus for large-scale simulation of the coupled THM/C processes related to geo-energy production. A series of mathematical/physical models were developed and implemented in this platform, including (1) an improved equation of state for CO2-CH4-H2O-NaCl system which considers the effect of salt on phase partition and fluid properties in gas reservoirs; (2) a modified coupling approach for the simulation of hydraulic fracturing in tight geo-reservoirs, which considers the multiphase multicomponent leakoff effects; (3) a thermo-hydro-mechanical model based on a crack tensor for naturally fractured rock masses and faults. All these verified models have been applied in three different case studies, including CO2 enhanced gas recovery (EGR) in the Altmark natural gas field; (2) Hydraulic fracturing in three different types of geo-reservoirs (tight gas, oil and geothermal reservoir); (3) Geothermal energy utilization induced seismicity in Unterhaching. The developed models and the numerical platform can be used to predict the coupled THM/C behavior of rock formations, to optimize the CO2-EGR and hydraulic fracturing in tight geo-reservoirs, as well as reduce the geo-risks related to geo-energy production.
Download or read book Development of coupled THM models for reservoir stimulation and geo energy production with supercritical CO2 as working fluid written by Jianxing Liao and published by Cuvillier Verlag. This book was released on 2020-07-28 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, two specific numerical models have been developed to address the issues associated with utilization of supercritical CO2, like fracture creation, proppant placement and fracture closure in unconventional gas reservoirs, reservoir stimulation, heat production and CO2 sequestration in deep geothermal reservoirs, respectively. In unconventional gas reservoir, the model consisting of classic fracture model, proppant transport model as well as temperature-sensitive fracturing fluids (CO2, thickened CO2 and guar gum) has been integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D), which has the ability to simulate single fracture propagation driven by different fracturing fluids in non-isothermal condition. To characterize the fracture network propagation and internal multi fluids behavior in deep geothermal reservoirs, an anisotropic permeability model on the foundation of the continuum anisotropic damage model has been developed and integrated into the popular THM coupled framework (TOUGH2MP-FLAC3D) as well. This model has the potential to simulate the reservoir stimulation and heat extraction based on a CO2-EGS concept.
Download or read book Numerical study of the stimulation related thermo hydro mechanical processes in tight gas and deep geothermal reservoirs written by Wentao Feng and published by Cuvillier Verlag. This book was released on 2020-03-05 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing in combination with horizontal well is playing a key role in the efficient development of unconventional gas/oil reservoirs and deep geothermal resources. However, the integral operation, especially from the perspective of THM (Thermal-Hydraulic-Mechanic) interactions have not been studied systematically. In this thesis, targeted improvements were achieved through developing a series of mathematical/physical models, and their implementation into the existing numerical tools (FLAC3Dplus and TOUGH2MP-FLAC3D), including: (a) a new thermal module for FLAC3Dplus based entirely on the finite volume method (FVM), which is especially developed for the fracturing process and can also achieve the modeling of gel breaking; (b) a rock damage module of TOUGH2MP-FLAC3D, which also considers the impacts of rock damaging process on evolution of permeability; (c) an in-depth improved FLAC3Dplus simulator that obtains the ability to simulate a 3D fracture propagation with arbitrary orientation. After the corresponding verifications, the improved tools were applied in different case studies to reveal: a) influences of the fluid’s viscosity on the fracturing results in tight sandstone reservoirs; b) the induced seismicity during the fracturing operation and the reactivation of the natural faults; and c) the fracture propagation with arbitrary orientation.
Download or read book Numerical study of physico chemical interactions for CO2 sequestration and geothermal energy utilization in the Ordos Basin China written by Hejuan Liu and published by Cuvillier Verlag. This book was released on 2014-11-10 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this dissertation, three simulators (i.e. TOUGH2MP, TOUGHREACT and FLAC3D) were used to simulate the complex physical and chemical interactions induced by CO2 sequestration. The simulations were done instages, ranging from the two phase (water and CO2) fluid flow (H2), through coupled hydro-mechanical effects (H2M) and geochemical responses (i.e. CO2-water-rock interactions (H2C)), to the extension of CCS to CCUS by the application of combined geothermal production and CO2 sequestration technologies. The findings of this study are essential for a thorough understanding of the complex interactions in the multiphase, multicomponent porous media controlled by different physical and chemical mechanisms. Furthermore, the simulation results will provide an invaluable reference for field operations in CCS projects, especially for the full-integration pilot scale CCS project launched in the Ordos Basin. Subsequently, a preliminary site selection scheme for the combined geothermal production and CO2 sequestration was set up, which considered various factorsinvolved in site selection, ranging from safety, economical, environmental and technical issues. This work provides an important framework for the combined geothermal production and CO2 sequestration project. However, further numerical and field studies are still needed to improve on a series of criteria and related parameters necessary for a better understanding of the technology.
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Geo systems written by Ove Stephansson and published by Elsevier. This book was released on 2004-11-03 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most important and exciting current steps forward in geo-engineering is the development of coupled numerical models. They represent the basic physics of geo-engineering processes which can include the effects of heat, water, mechanics and chemistry. Such models provide an integrating focus for the wide range of geo-engineering disciplines. The articles within this volume were originally presented at the inaugural GeoProc conference held in Stockholm and contain a collection of unusually high quality information not available elsewhere in an edited and coherent form. This collection not only benefits from the latest theoretical developments but also applies them to a number of practical and wide ranging applications. Examples include the environmental issues around radioactive waste disposal deep in rock, and the search for new reserves of oil and gas.
Download or read book Coupled Thermo Hydro Mechanical Chemical Processes in Fractured Rocks written by Zhihong Zhao and published by Springer Nature. This book was released on 2023-11-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the coupled Thermo-Hydro-Mechanical-Chemical (THMC) processes in fractured rocks at varying scales from single fractures to fracture networks. It also discussed the implication and potential application of the advanced understanding of coupled THMC processes in fractured rocks for geotechnical and geo-energy engineering.
Download or read book Thermo Hydro Mechanical THM coupled simulations of innovative enhanced geothermal systems for heat and electricity production as well as energy storage written by Muhammad Haris and published by Cuvillier Verlag. This book was released on 2022-08-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced geothermal systems (EGSs) evolved from the hot dry rock can provide a significant amount of energy while shifting towards negligible carbon emission. In order to investigate some important issues related to EGS, several scenarios have been analyzed using powerful numerical tools (FLAC3Dplus and TOUGH2MP-TMVOC). While conducting multiple hydraulic fracturing, it is observed that the newly created successive fracture’s configuration highly depends on the previous one under the influence of stress shadow. Therefore, the assumption of using similar multiple fracture geometries and shapes for energy exploitation may lead to erroneous estimations. A case study has been performed further using the engineering data of the GeneSys project in the North German Basin. Numerous scenarios have been investigated, and the optimized EGS project is proposed, whose installed power capacity of one side of the injection well declines from 7.17 MW to 5.08 MW over 30 years. Moreover, the Levelized cost of electricity is calculated at 5.46 c$/kWh, which is quite economical compared to the current electricity price. Finally, an innovative concept of regenerative EGS is proposed by storing surplus renewable energy in multiple hydraulic fractures that can reduce the reservoir temperature reduction rate. The results of continuous injection/production cycles depicted that a regenerative EGS could be achieved in reality.
Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Invited Lectures written by Sérgio A. B. da Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development. Invited Lectures contains the Invited and Keynote Lectures and the prestigious ISRM Award Lectures (the Leopold Muller Award Lecture by professor Peter K. Kaiser and the Manuel Rocha Award Lecture by Dr. Quinghua Lei), as presented at the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years, where relevant themes related to rock mechanics and rock engineering are discussed. This volume covers topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, to petroleum, mining and civil engineering applications, and is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 5 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.
Download or read book Rock Mechanics for Natural Resources and Infrastructure Development Full Papers written by Sergio A.B. Fontoura and published by CRC Press. This book was released on 2019-09-03 with total page 3791 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics for Natural Resources and Infrastructure Development contains the proceedings of the 14th ISRM International Congress (ISRM 2019, Foz do Iguaçu, Brazil, 13-19 September 2019). Starting in 1966 in Lisbon, Portugal, the International Society for Rock Mechanics and Rock Engineering (ISRM) holds its Congress every four years. At this 14th occasion, the Congress brings together researchers, professors, engineers and students around contemporary themes relevant to rock mechanics and rock engineering. Rock Mechanics for Natural Resources and Infrastructure Development contains 7 Keynote Lectures and 449 papers in ten chapters, covering topics ranging from fundamental research in rock mechanics, laboratory and experimental field studies, and petroleum, mining and civil engineering applications. Also included are the prestigious ISRM Award Lectures, the Leopold Muller Award Lecture by professor Peter K. Kaiser. and the Manuel Rocha Award Lecture by Dr. Quinghua Lei. Rock Mechanics for Natural Resources and Infrastructure Development is a must-read for academics, engineers and students involved in rock mechanics and engineering. Proceedings in Earth and geosciences - Volume 6 The ‘Proceedings in Earth and geosciences’ series contains proceedings of peer-reviewed international conferences dealing in earth and geosciences. The main topics covered by the series include: geotechnical engineering, underground construction, mining, rock mechanics, soil mechanics and hydrogeology.
Download or read book Rock Characterisation Modelling and Engineering Design Methods written by Xia-Ting Feng and published by CRC Press. This book was released on 2013-05-17 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Characterisation, Modelling and Engineering Design Methods contains the contributions presented at the 3rd ISRM SINOROCK Symposium (Shanghai, China, 1820 June 2013). The papers contribute to the further development of the overall rock engineering design process through the sequential linkage of the three themes of rock characterisation, model
Download or read book Clean Energy Systems in the Subsurface Production Storage and Conversion written by Michael Z. Hou and published by Springer Science & Business Media. This book was released on 2013-04-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anthropogenic greenhouse gas emissions, energy security and sustainability are three of the greatest contemporary global challenges today. This year the Sino-German Cooperation Group “Underground Storage of CO2 and Energy”, is meeting on the 21-23 May 2013 for the second time in Goslar, Germany, to convene its 3rd Sino-German conference on the theme “Clean Energy Systems in the Subsurface: Production, Storage and Conversion”. This volume is a collection of diverse quality scientific works from different perspectives elucidating on the current developments in CO2 geologic sequestration research to reduce greenhouse emissions including measures to monitor surface leakage, groundwater quality and the integrity of caprock, while ensuring a sufficient supply of clean energy. The contributions herein have been structured into 6 major thematic research themes: Integrated Energy and Environmental Utilization of Geo-reservoirs: Law, Risk Management & Monitoring CO2 for Enhanced Gas and Oil Recovery, Coal Bedded Methane and Geothermal Systems Trapping Mechanisms and Multi-Barrier Sealing Systems for Long-Term CO2 Storage Coupled THMC-Processes and Numerical Modelling Rock Mechanical Behaviour Considering Cyclic Loading, Dilatancy, Damage, Self-sealing and Healing Underground Storage and Supply of Energy “Clean energy systems in the subsurface” will be invaluable to researchers, scientists and experts in both academia and industry trying to find a long lasting solution to the problems of global climate change, energy security and sustainability.
Download or read book Underground Storage of CO2 and Energy written by Michael Z. Hou and published by CRC Press. This book was released on 2010-07-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the known greenhouse gases, political attention to date has primarily focused on carbon dioxide (CO2), whereby it is assumed that underground storages of crude oil and natural gas through Carbon Capture and Storage (CCS) technology could contribute significantly to global climate protection. Underground Storage of CO2 and Energy covers many aspects of CO2 sequestration and its usage, as well as of underground storage of fossil and renewable energy sources, and is divided into 8 parts: • Environmental and Energy Policy & Law for Underground Storage • Geological Storage and Monitoring • Enhanced Gas and Oil Recovery Using CO2 (CO2 -EGR/EOR) • Rock Mechanical Behavior in Consideration of Dilatancy and Damage • Underground Storage of Natural Gas and Oil • Underground Storage of Wind Energy • State-of-the-Art & New Developments in Gas Supply in Germany and China • EOR & New Drilling Technology Underground Storage of CO2 and Energy will be invaluable to academics, professionals and engineers, and to industries and governmental bodies active in the field of underground storage of fossil and renewable energy sources.
Download or read book Thermo Hydro Mechanical Chemical Processes in Porous Media written by Olaf Kolditz and published by Springer Science & Business Media. This book was released on 2012-04-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises an assembly of benchmarks and examples for porous media mechanics collected over the last twenty years. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to many applications in environmental engineering, such as geological waste deposition, geothermal energy utilisation, carbon capture and storage, water resources management, hydrology, even climate chance. In order to assess the feasibility as well as the safety of geotechnical applications, process-based modelling is the only tool to put numbers, i.e. to quantify future scenarios. This charges a huge responsibility concerning the reliability of computational tools. Benchmarking is an appropriate methodology to verify the quality of modelling tools based on best practices. Moreover, benchmarking and code comparison foster community efforts. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation.
Download or read book Science of Carbon Storage in Deep Saline Formations written by Pania Newell and published by Elsevier. This book was released on 2018-09-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science of Carbon Storage in Deep Saline Formations: Process Coupling across Time and Spatial Scales summarizes state-of-the-art research, emphasizing how the coupling of physical and chemical processes as subsurface systems re-equilibrate during and after the injection of CO2. In addition, it addresses, in an easy-to-follow way, the lack of knowledge in understanding the coupled processes related to fluid flow, geomechanics and geochemistry over time and spatial scales. The book uniquely highlights process coupling and process interplay across time and spatial scales that are relevant to geological carbon storage. Includes the underlying scientific research, as well as the risks associated with geological carbon storage Covers the topic of geological carbon storage from various disciplines, addressing the multi-scale and multi-physics aspects of geological carbon storage Organized by discipline for ease of navigation
Download or read book Thermo Hydro Mechanical Chemical Processes in Fractured Porous Media Modelling and Benchmarking written by Olaf Kolditz and published by Springer. This book was released on 2018-03-01 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book comprises the 3rd collection of benchmarks and examples for porous and fractured media mechanics. Analysis of thermo-hydro-mechanical-chemical (THMC) processes is essential to a wide area of applications in environmental engineering, such as geological waste deposition, geothermal energy utilization (shallow and deep systems), carbon capture and storage (CCS) as well as water resources management and hydrology. In order to assess the feasibility, safety as well as sustainability of geoenvironmental applications, model-based simulation is the only way to quantify future scenarios. This charges a huge responsibility concerning the reliability of conceptual models and computational tools. Benchmarking is an appropriate methodology to verify the quality and validate the concept of models based on best practices. Moreover, benchmarking and code comparison are building strong community links. The 3rd THMC benchmark book also introduces benchmark-based tutorials, therefore the subtitle is selected as “From Benchmarking to Tutoring”. The benchmark book is part of the OpenGeoSys initiative - an open source project to share knowledge and experience in environmental analysis and scientific computation. The new version of OGS-6 is introduced and first benchmarks are presented therein (see appendices).
Download or read book Material Science and Environmental Engineering written by Ping Chen and published by CRC Press. This book was released on 2015-12-30 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Science and Environmental Engineering presents novel and fundamental advances in the fields of material science and environmental engineering. Collecting the comprehensive and state-of-art in these fields, the contributions provide a broad overview of the latest research results, so that it will proof to be a valuable reference book to aca
Download or read book Water Flow Solute and Heat Transfer in Groundwater written by Alexander Yakirevich and published by MDPI. This book was released on 2021-01-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater is an essential and vital water resource for drinking water production, agricultural irrigation, and industrial processes. Having a better understanding of physical and chemical processes in aquifers enables more reliable decisions and reduces investments concerning water management. This Special Issue on “Water Flow, Solute, and Heat Transfer, in Groundwater” of Water focuses on the recent advances in groundwater dynamics, and it includes high-quality papers that cover a wide range of issues on different aspects related to groundwater: protection from contamination, recharge, heat transfer, hydraulic parameters estimation, well hydraulics, microbial community, colloid transport, and mathematical models. This integrative volume aims to transfer knowledge to hydrologists, hydraulic engineers, and water resources planners, who are engaged in the sustainable development of groundwater resources.