Download or read book Numerical Solution of Hybrid Nanofluid and Its Stability Over Permeable Wedge Sheet With Heat Transfer Analysis written by Aisha M. Alqahtani and published by Infinite Study. This book was released on 2024-01-01 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inclusion of nanoparticles has the potential to improve the thermal efficiency of the base fluid. The field of nanofluid (NF) dynamics has attracted important attention due to its extensive range of practical uses like fuel cells, solar energy, medication administration, heat transfer, microfabrication, coolant applications, and other related domains. The aim of this study is to scrutinize the impact of Lorentz force, thermal energy, joule heating, heat source and injection parameters, and Brownian and thermoporetic diffusions on the hybrid nanofluid over the moving wedge. The stability inquiry is reported for the existing work in order to confirm the stable solutions that make the study unique. Novelty of the existing work is to investigate the hybrid nanofluid flow and its stability. The nanoparticles MoS2 and Ag are suspended in ethylene glycol and water used as host fluids. The numerical solution is obtained from the dimensionless first-order differential equations, which are achieved from the basic flow phenomena through similarity alteration variables. The influence of emerging factors on flow phenomena is reported via graphs. The positive eigenvalues report stable solutions, while the negative eigenvalues designate unstable solutions. It is perceived that due to Lorentz force, the rate of the fluid declines while the temperature inside the flow channel enhances. The velocity profile decreases while the temperature and concentration increase with increasing quantities of permeable factors. Similarly, the Forchheimer number causes to enhance the flow rate and decrease the heat and concentration outlines. The current analysis is validated by the published work.
Download or read book Hybrid Nanofluids written by Zafar Said and published by Elsevier. This book was released on 2022-01-28 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids: Preparation, Characterization and Applications presents the history of hybrid nanofluids, preparation techniques, thermoelectrical properties, rheological behaviors, optical properties, theoretical modeling and correlations, and the effect of all these factors on potential applications, such as solar energy, electronics cooling, heat exchangers, machining, and refrigeration. Future challenges and future work scope have also been included. The information from this book enables readers to discover novel techniques, resolve existing research limitations, and create novel hybrid nanofluids which can be implemented for heat transfer applications. Describes the characterization, thermophysical and electrical properties of nanofluids Assesses parameter selection and property measurement techniques for the calibration of thermal performance Provides information on theoretical models and correlations for predicting hybrid nanofluids properties from experimental properties
Download or read book Nanofluids written by Sarit K. Das and published by John Wiley & Sons. This book was released on 2007-12-04 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to nanofluids--their properties, synthesis, characterization, and applications Nanofluids are attracting a great deal of interest with their enormous potential to provide enhanced performance properties, particularly with respect to heat transfer. In response, this text takes you on a complete journey into the science and technology of nanofluids. The authors cover both the chemical and physical methods for synthesizing nanofluids, explaining the techniques for creating a stable suspension of nanoparticles. You get an overview of the existing models and experimental techniques used in studying nanofluids, alongside discussions of the challenges and problems associated with some of these models. Next, the authors set forth and explain the heat transfer applications of nanofluids, including microelectronics, fuel cells, and hybrid-powered engines. You also get an introduction to possible future applications in large-scale cooling and biomedicine. This book is the work of leading pioneers in the field, one of whom holds the first U.S. patent for nanofluids. They have combined their own first-hand knowledge with a thorough review of theliterature. Among the key topics are: * Synthesis of nanofluids, including dispersion techniques and characterization methods * Thermal conductivity and thermo-physical properties * Theoretical models and experimental techniques * Heat transfer applications in microelectronics, fuel cells, and vehicle engines This text is written for researchers in any branch of science and technology, without any prerequisite.It therefore includes some basic information describing conduction, convection, and boiling of nanofluids for those readers who may not have adequate background in these areas. Regardless of your background, you'll learn to develop nanofluids not only as coolants, but also for a host ofnew applications on the horizon.
Download or read book Emerging Technologies in Data Mining and Information Security written by Paramartha Dutta and published by Springer Nature. This book was released on 2022-09-28 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features research papers presented at the International Conference on Emerging Technologies in Data Mining and Information Security (IEMIS 2022) held at Institute of Engineering & Management, Kolkata, India, during February 23–25, 2022. The book is organized in three volumes and includes high-quality research work by academicians and industrial experts in the field of computing and communication, including full-length papers, research-in-progress papers and case studies related to all the areas of data mining, machine learning, Internet of Things (IoT) and information security.
Download or read book Intelligent Systems Modeling and Simulation II written by Samsul Ariffin Abdul Karim and published by Springer Nature. This book was released on 2022-10-12 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops a new system of modeling and simulations based on intelligence system. As we are directly moving from Third Industrial Revolution (IR3.0) to Fourth Industrial Revolution (IR4.0), there are many emergence techniques and algorithm that appear in many sciences and engineering branches. Nowadays, most industries are using IR4.0 in their product development as well as to refine their products. These include simulation on oil rig drilling, big data analytics on consumer analytics, fastest algorithm for large-scale numerical simulations and many more. These will save millions of dollar in the operating costs. Without any doubt, mathematics, statistics and computing are well blended to form an intelligent system for simulation and modeling. Motivated by this rapid development, in this book, a total of 41 chapters are contributed by the respective experts. The main scope of the book is to develop a new system of modeling and simulations based on machine learning, neural networks, efficient numerical algorithm and statistical methods. This book is highly suitable for postgraduate students, researchers as well as scientists that have interest in intelligent numerical modeling and simulations.
Download or read book Advances in New Heat Transfer Fluids written by Alina Adriana Minea and published by CRC Press. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 12.5 Detection, Measurement, and Purification Using Cold Traps
Download or read book Solving ODEs with MATLAB written by Lawrence F. Shampine and published by Cambridge University Press. This book was released on 2003-04-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise text, first published in 2003, is for a one-semester course for upper-level undergraduates and beginning graduate students in engineering, science, and mathematics, and can also serve as a quick reference for professionals. The major topics in ordinary differential equations, initial value problems, boundary value problems, and delay differential equations, are usually taught in three separate semester-long courses. This single book provides a sound treatment of all three in fewer than 300 pages. Each chapter begins with a discussion of the 'facts of life' for the problem, mainly by means of examples. Numerical methods for the problem are then developed, but only those methods most widely used. The treatment of each method is brief and technical issues are minimized, but all the issues important in practice and for understanding the codes are discussed. The last part of each chapter is a tutorial that shows how to solve problems by means of small, but realistic, examples.
Download or read book Modern world heat transfer problems Role of nanofluids and fractional order approaches written by Adnan and published by Frontiers Media SA. This book was released on 2023-01-31 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofluid Flow in Porous Media written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of fluid flow and heat transfer in a porous medium have been the subject of continuous interest for the past several decades because of the wide range of applications, such as geothermal systems, drying technologies, production of thermal isolators, control of pollutant spread in groundwater, insulation of buildings, solar power collectors, design of nuclear reactors, and compact heat exchangers, etc. There are several models for simulating porous media such as the Darcy model, Non-Darcy model, and non-equilibrium model. In porous media applications, such as the environmental impact of buried nuclear heat-generating waste, chemical reactors, thermal energy transport/storage systems, the cooling of electronic devices, etc., a temperature discrepancy between the solid matrix and the saturating fluid has been observed and recognized.
Download or read book Advancements in Nanotechnology for Energy and Environment written by Dharmendra Tripathi and published by Springer Nature. This book was released on 2022-09-16 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a very useful and valuable collection of chapters associated with recent developments in energy, environment, and nanotechnology including nanofluids dynamics. The book provides insights related to various forms of nanotechnological applications in green buildings, environmental and electrochemical systems, solar distillation systems, green energy, storage tank of the solar water heating systems, solar concentrator system's receiver, solar adsorption refrigeration system, and CFD simulations of various aspects of nanofluids/hybrid nanofluids, which are particularly useful, valuable for the betterment of society, culture, and ultimately mankind.
Download or read book Heat Transfer Enhancement with Nanofluids written by Vincenzo Bianco and published by CRC Press. This book was released on 2015-04-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from
Download or read book Advances in Nanofluid Heat Transfer written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2022-05-28 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanofluid Heat Transfer covers the broad definitions, brief history, preparation techniques, thermophysical properties, heat transfer characteristics, and emerging applications of hybrid nanofluids. Starting with the basics, this book advances step-by-step toward advanced topics, with mathematical models, schematic diagrams and discussions of the experimental work of leading researchers. By introducing readers to new techniques, this book helps readers resolve existing problems and implement nanofluids in innovative new applications. This book provides detailed coverage of stability and reliable measurement techniques for nanofluid properties, as well as different kinds of base fluids. Providing a clear understanding of what happens at the nanoscale, the book is written to be used by engineers in industry as well as researchers and graduate students. Covers new applications of nanofluids, along with key challenges encountered in the commercialization of this technology Highlights new nanofluid properties and associated numerical modeling methods Addresses the very latest topics in nanofluids sciences, such as ionic nanofluids
Download or read book Hybrid Nanofluids for Convection Heat Transfer written by Hafiz Muhammad Ali and published by Academic Press. This book was released on 2020-05-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Nanofluids for Convection Heat Transfer discusses how to maximize heat transfer rates with the addition of nanoparticles into conventional heat transfer fluids. The book addresses definitions, preparation techniques, thermophysical properties and heat transfer characteristics with mathematical models, performance-affecting factors, and core applications with implementation challenges of hybrid nanofluids. The work adopts mathematical models and schematic diagrams in review of available experimental methods. It enables readers to create new techniques, resolve existing research problems, and ultimately to implement hybrid nanofluids in convection heat transfer applications. Provides key heat transfer performance and thermophysical characteristics of hybrid nanofluids Reviews parameter selection and property measurement techniques for thermal performance calibration Explores the use of predictive mathematical techniques for experimental properties
Download or read book Nanoparticle Heat Transfer and Fluid Flow written by W. J. Minkowycz and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions by leading researchers in the field, Nanoparticle Heat Transfer and Fluid Flow explores heat transfer and fluid flow processes in nanomaterials and nanofluids, which are becoming increasingly important across the engineering disciplines. The book covers a wide range, from biomedical and energy conversion applications to mate
Download or read book Computational Fluid Flow and Heat Transfer written by Mukesh Kumar Awasthi and published by CRC Press. This book was released on 2024-04-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text provides insight into the different mathematical tools and techniques that can be applied to the analysis and numerical computations of flow models. It further discusses important topics such as the heat transfer effect on boundary layer flow, modeling of flows through porous media, anisotropic polytrophic gas model, and thermal instability in viscoelastic fluids. This book: Discusses modeling of Rayleigh-Taylor instability in nanofluid layer and thermal instability in viscoelastic fluids Covers open FOAM simulation of free surface problems, and anisotropic polytrophic gas model Highlights the Sensitivity Analysis in Aerospace Engineering, MHD Flow of a Micropolar Hybrid Nanofluid, and IoT-Enabled Monitoring for Natural Convection Presents thermal behavior of nanofluid in complex geometries and heat transfer effect on Boundary layer flow Explains natural convection heat transfer in non-Newtonian fluids and homotropy series solution of the boundary layer flow Illustrates modeling of flows through porous media and investigates Shock-driven Richtmyer-Meshkov instability It is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of Applied Sciences, Mechanical Engineering, Manufacturing Engineering, Production Engineering, Industrial engineering, Automotive engineering, and Aerospace engineering.
Download or read book Applications of Nanofluid for Heat Transfer Enhancement written by Mohsen Sheikholeslami and published by William Andrew. This book was released on 2017-02-26 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanofluid for Heat Transfer Enhancement explores recent progress in computational fluid dynamic and nonlinear science and its applications to nanofluid flow and heat transfer. The opening chapters explain governing equations and then move on to discussions of free and forced convection heat transfers of nanofluids. Next, the effect of nanofluid in the presence of an electric field, magnetic field, and thermal radiation are investigated, with final sections devoted to nanofluid flow in porous media and application of nanofluid for solidification. The models discussed in the book have applications in various fields, including mathematics, physics, information science, biology, medicine, engineering, nanotechnology, and materials science. Presents the latest information on nanofluid free and force convection heat transfer, of nanofluid in the presence of thermal radiation, and nanofluid in the presence of an electric field Provides an understanding of the fundamentals in new numerical and analytical methods Includes codes for each modeling method discussed, along with advice on how to best apply them
Download or read book Extended Surface Heat Transfer written by Allan D. Kraus and published by John Wiley & Sons. This book was released on 2002-03-14 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drei anerkannte Experten dieses schnellebigen, modernen Fachgebiets erläutern hier Theorie, Design und Anwendungen eines breiten Spektrums von Oberflächen, die speziell für den effizienten Wärmetransport ausgelegt sind. Behandelt werden u. a. kompakte Wärmetauscher, periodische Wärmeströme und Siedevorgänge an Kühlrippen. Umfassend und informativ!
